This dataset contains observations of species occurrences from seafloor imagery collected by the autonomous underwater vehicle (AUV) during the 2012 Expedition to Cobb Seamount. The National Oceanographic and Atmospheric Administration-operated SeaBED-class AUV which collected photographic images from 4 transects ranging from 436 m to 1154 m in depth.

The Eastern Shore Islands was announced as an "Area of Interest" (AOI) in 2018 by the DFO Maritimes region to potentially be considered for a Marine Protected Area under the federal Oceans Act. As part of its mandate for monitoring established and potential conservation areas, DFO Science regularly deploys instruments including conductivity/temperature/depth (CTD) loggers, and other instruments for measuring dissolved oxygen, nutrients, and other chemical ocean properties. This data collection includes temperature and other oceanographic records for the ESI AOI from June 2024 onward. The data are derived from temperature loggers (Hobo Tidbit loggers or similar) and Sea-Bird MicroCATs, but may in future years include current profiles or additional oceanographic data. These data will be used to monitor temperatures in this coastal region to detect any biological shifts associated with temperature and climate fluctuations, and be used to groundtruth oceanographic models.Cite this data as: Jeffery, N., Stanley, R., Pettitt- Wade, H. (2025): Data of: Baseline oceanographic records for the Eastern Shore Islands Area of Interest.Published: September 2025. Coastal Ecosystems Science Division, Fisheries and Oceans Canada, Dartmouth, N.S. https://open.canada.ca/data/en/dataset/f0020cec-5671-4908-8fdd-11fc097de99d

This dataset contains observations of species occurrences from seafloor imagery collected by the remotely operated underwater vehicle (ROV) during the 2012 Expedition to Cobb Seamount. The ROV operated by Fisheries and Oceans Canada was a customized Deep Ocean Engineering Phantom HD2+2 which collected photographic images from 12 transects ranging from 35 m to 211 m in depth.

The shallow substrate bottom type model was created to support near shore habitat modelling. Data sources include both available observations of bottom type and environmental predictor layers including oceanographic layers, fetch, and bathymetry and its derivatives. Using weighted random forest classification from the ranger R package, the relationship between observed bottom type and predictor layers can be determined, allowing bottom type to be classified across the study areas. The predicted raster files are classified as follows: 1) Rock, 2) Mixed, 3) Sand, 4) MudThe categorical substrate model domains are restricted to the extent of the input bathymetry layers (see data sources) which is 5 km from the 50 m depth contour.

CHS offers 500-metre bathymetric gridded data for users interested in the topography of the seafloor. This data provides seafloor depth in metres and is accessible for download as predefined areas.

PURPOSE:Eastern Beaufort Sea beluga whales form one of the largest summering aggregations of the species in the Mackenzie Estuary. In 2010, the Tarium Niryutait Marine Protected Area (TNMPA) was designated to protect beluga whales and their habitats As a part of ongoing ecological monitoring efforts in the TN MPA, passive acoustic monitoring (PAM) was implemented in 2011 to act as continuous monitoring method, filling the temporal gaps associated with historical aerial surveys. Beginning in 2014, PAM effort increased each year, and oceanographic sensors were added to moorings to (1) better understand oceanographic conditions within the TN MPA and (2) examine the environmental parameters that drive beluga movement and habitat use patterns within the estuary. Several studies using this dataset have been completed, and others are ongoing. However, much more can be done with the acoustic and environmental data. The purpose of this report is to outline deployment methods and instrument settings for moorings to support the full use of the data collected. DESCRIPTION:Each summer, Eastern Beaufort Sea beluga whales form one of the largest aggregations of the species in the Mackenzie Estuary. In 2010, the Tarium Niryutait Marine Protected Area (TNMPA) was designated in the estuary to protect beluga whales and their habitats. As a part of ongoing ecological monitoring efforts in the TN MPA, passive acoustic monitoring (PAM) was implemented in 2011 to act as continuous monitoring method, filling the temporal gaps associated with historical aerial surveys. Beginning in 2014, PAM effort increased each year, and oceanographic sensors were added to each PAM mooring to (1) better understand oceanographic conditions (i.e., temperature, salinity, turbidity, and wave conditions) within the TN MPA and (2) to examine the environmental parameters that drive beluga movement and habitat use patterns within the estuary. Moorings have been deployed with varying configurations of oceanographic sensors in Kugmallit Bay since 2015, but typically record water temperature, salinity, depth, and wave conditions. In 2018, the program was expanded to the Niaqunnaq parcel of the MPA (Shallow Bay), and in 2021 it was expanded again to the Okeevik parcel of the MPA. These observatories have provided new knowledge about drivers of beluga habitat use in the TN MPA, in particular in Kittigaryuit, but more recently in Niaqunnaq and Okeevik.

Description:Seasonal mean primary production from the British Columbia continental margin model (BCCM) were averaged over the 1993 to 2020 period and depth-integrated to create seasonal mean climatology of the Canadian Pacific Exclusive Economic Zone. Methods:Total primary production is the sum of diatoms and flagellates production. Spring months were defined as April to June, summer months were defined as July to September, fall months were defined as October to December, and winter months were defined as January to March. The data available here contain a raster layer of seasonal depth-integrated primary production climatology for the Canadian Pacific Exclusive Economic Zone at 3 km spatial resolution.Uncertainties:Model results have been extensively evaluated against observations (e.g. altimetry, CTD and nutrient profiles, observed geostrophic currents), which showed the model can reproduce with reasonable accuracy the main oceanographic features of the region including salient features of the seasonal cycle and the vertical and cross-shore gradient of water properties. However, the model resolution is too coarse to allow for an adequate representation of inlets, nearshore areas, and the Strait of Georgia.

Daily sea surface temperature and salinity observations have been carried out at several locations on the coast of British Columbia since the early part of the 20th century. Observations started at the Pacific Biological Station (Departure Bay) in 1914; 11 stations were added in the mid-1930s and several more in the 1960s. The number of stations reporting at any given time has varied as sampling has been discontinued at some stations and started or resumed at others.Presently termed the British Columbia Shore Station Oceanographic Program (BCSOP), there are 12 active participating stations. Most of the stations are at lighthouses staffed by Fisheries and Oceans Canada, but three (Race Rocks, Amphitrite Point, and Active Pass) are sampled by contracted observers.Observations are made daily using seawater collected in a bucket lowered into the surface water at or near the daytime high tide. This sampling method was designed long ago by Dr. John P. Tully and has not been changed in the interests of a homogeneous data set. This means, for example, that if an observer starts sampling one day at 6 a.m., and continues to sample at the daytime high tide on the second day the sample will be taken at about 06:50 the next day, 07:40 the day after etc. When the daytime high-tide gets close to 6 p.m. the observer will then begin again to sample early in the morning, and the cycle continues. Since there is a day/night variation in the sea surface temperatures the daily time series will show a signal that varies with the14-day tidal cycle. This artifact does not affect the monthly sea surface temperature data.

Description:Seasonal mean primary production from the British Columbia continental margin model (BCCM) were averaged over the 1981 to 2010 period and depth-integrated to create seasonal mean climatology of the Canadian Pacific Exclusive Economic Zone. Methods:Total primary production is the sum of diatoms and flagellates production. Spring months were defined as April to June, summer months were defined as July to September, fall months were defined as October to December, and winter months were defined as January to March. The data available here contain a raster layer of seasonal depth-integrated primary production climatology for the Canadian Pacific Exclusive Economic Zone at 3 km spatial resolution.Uncertainties:Model results have been extensively evaluated against observations (e.g. altimetry, CTD and nutrient profiles, observed geostrophic currents), which showed the model can reproduce with reasonable accuracy the main oceanographic features of the region including salient features of the seasonal cycle and the vertical and cross-shore gradient of water properties. However, the model resolution is too coarse to allow for an adequate representation of inlets, nearshore areas, and the Strait of Georgia.

The Coastal Environmental Baseline Program is a multi-year Fisheries and Oceans Canada initiative designed to work with Indigenous and local communities and other key parties to collect coastal environmental data at a series of sites across Canada, to build a better understanding of existing marine ecological conditions. The program began data collection in 2019, and with the onset of Phase 2 in 2023, the Maritimes region study area was expanded and renamed ‘Northwest Fundy Shores’. A physical oceanography program was designed to align with the oceanographic interests and data needs of local interest holders. Starting in 2023, oceanographic parameters including water temperature, salinity, depth and turbidity have been monitored at a series of locations in Passamaquoddy Bay, the St. Croix River, and along the Bay of Fundy coast, including the Musquash estuary Marine Protected Area (MPA). This dataset includes seasonal CTD (conductivity, temperature and depth) and turbidity data starting in spring 2023. Instruments are maintained through the winter months at a limited number of sites. Data collection methods are primarily moored instruments on the bottom in water depths of 5-90 meters, and a few buoyant surface floats. Overall, this dataset captures seasonal dynamics in near-shore marine environments in Passamaquoddy Bay, the St Croix River, the Bay of Fundy and the Musquash MPA. Cite this data as: Coastal Environmental Baseline Program (Maritimes Region), Northwest Fundy Shores conductivity, temperature and depth data. Published in May 2025. Coastal Environmental Baseline Program. Coastal Ecosystems Science Division, Fisheries and Oceans Canada, St. Andrews, N.B. 14-02-2025