This is the spatial view used by Mineral Titles Online (MTO) on the mineral, placer and coal viewers. The spatial view combines the polygon information with attribute information for each title. Contains sub-surface title data in British Columbia for: - mineral claims, mining leases, mineral claim applications - placer claims, placer leases, placer claim applications - coal license applications, coal licenses, coal leases

Sub-surface facilities used for storing natural gas. The facilities are usually hollowed-out salt domes, geological reservoirs (depleted oil or gas field) or water bearing sands (called aquifers) topped by an impermeable cap rock.Mapping Resources implemented as part of the North American Cooperation on Energy Information (NACEI) between the Department of Energy of the United States of America, the Department of Natural Resources of Canada, and the Ministry of Energy of the United Mexican States.The participating Agencies and Institutions shall not be held liable for improper or incorrect use of the data described and/or contained herein. These data and related graphics, if available, are not legal documents and are not intended to be used as such. The information contained in these data is dynamic and may change over time and may differ from other official information. The Agencies and Institutions participants give no warranty, expressed or implied, as to the accuracy, reliability, or completeness of these data.

Facilities designed to recover natural gas liquids from a stream of natural gas. These facilities control the quality of the natural gas to be marketed.Mapping Resources implemented as part of the North American Cooperation on Energy Information (NACEI) between the Department of Energy of the United States of America, the Department of Natural Resources of Canada, and the Ministry of Energy of the United Mexican States.The participating Agencies and Institutions shall not be held liable for improper or incorrect use of the data described and/or contained herein. These data and related graphics, if available, are not legal documents and are not intended to be used as such. The information contained in these data is dynamic and may change over time and may differ from other official information. The Agencies and Institutions participants give no warranty, expressed or implied, as to the accuracy, reliability, or completeness of these data.Parent Collection:[North American Cooperation on Energy Information, Mapping Data](https://open.canada.ca/data/en/dataset/aae6619f-f9f3-435d-bc32-42decd58b674)

This dataset is produced and published annually by Natural Resources Canada. It contains a variety of statistics on Canada’s mineral production, and provides the geographic locations of significant metallic, nonmetallic and coal mines, oil sands mines, selected metallurgical works, helium facilities, and oil and gas fields for the provinces and territories of Canada.Related product:- **[Top 100 Exploration Projects](https://open.canada.ca/data/en/dataset/b64179f3-ea0f-4abb-9cc5-85432fc958a0)**

Stations containing prime movers, electric generators, and auxiliary equipment for converting mechanical, chemical, and/or fission energy into electric energy with an installed capacity of 100 megawatts or more.Mapping Resources implemented as part of the North American Cooperation on Energy Information (NACEI) between the Department of Energy of the United States of America, the Department of Natural Resources of Canada, and the Ministry of Energy of the United Mexican States.The participating Agencies and Institutions shall not be held liable for improper or incorrect use of the data described and/or contained herein. These data and related graphics, if available, are not legal documents and are not intended to be used as such. The information contained in these data is dynamic and may change over time and may differ from other official information. The Agencies and Institutions participants give no warranty, expressed or implied, as to the accuracy, reliability, or completeness of these data.Parent Collection:[North American Cooperation on Energy Information, Mapping Data](https://open.canada.ca/data/en/dataset/aae6619f-f9f3-435d-bc32-42decd58b674)

This point dataset represents both applications for a Mines Act permit and issued authorizations for mining activities proposed in the application. Applications for regional Mines Act permits are known as Notice of Work (NoW) applications. Regional mine permits are issued for mineral and coal exploration activities, sand and gravel production, quarry production, and placer mining. Major mine permits are issued for producing mineral and coal mines. Permits are issued by the chief permitting officer under section 10 of the Mines Act and administered by the ministry. Regional mines include: * Exploration — mineral, coal, rock quarry, industrial mineral or dimension stone * Sand and gravel — aggregate, rock or natural substances used for construction purposes * Placer   Most exploration and development activities require a permit under the Mines Act. A decision marks the end of the permitting process for a NoW application. The decision can either be to reject the application or to authorize the mining activities proposed in the NoW. * For new NoW authorizations, a Mines Act permit is issued * For an existing open Mines Act permit, the newly authorized mining activities are amended to the existing permit and the permit is re-issued   **NOTE:** Administrative amendments to a NoW are not captured in this dataset. We are currently working to include this addition for a more complete view of the data. For proponents, please log into https://minespace.gov.bc.ca/ to confirm any authorizations on your permits. The ministry is transitioning from point data to polygonal data for permits and authorizations. The polygon dataset is added to when data becomes available. Users should use both the point dataset and the polygon dataset in combination. Polygon representation of permits with authorizations are referred to as Notice of Work (NoW) – Permitted Mine Areas – Regional Mine - Public https://catalogue.data.gov.bc.ca/dataset/c728435d-410e-42f9-81d5-95978c90e44a The downloaded product from the BCGW is a complete set of all the NoW public records. In addition to the records that contain lat/long references to be mapped spatially, this includes records that do not have NoW lat/long or mine lat/long coordinates to spatialize. These records are listed in a CSV file (HSP_NOTICE_OF_WORK_PA_POINT_SV_NullGeom). Notice of Work categories include: Notice of Work application type, Notice of Work application status. **Notice of Work application type** Field: NOW_APPLICATION_TYPE_DESC (NW_APPTYPD) * Coal * Mineral * Placer Operations * Quarry – Construction Aggregate * Quarry – Industrial Mineral * Sand and Gravel   **Notice of Work application status** Field: NOW_APPLICATION_STATUS_DESC (NW_APPSTAD) * Approved – mining activities in the NoW application have been authorized * Client Delayed – Client needs to provide additional information or reclamation security * Government Action Required – Government needs to action; this status is triggered once a client has provided the requested information and client delay is no longer valid * Referred – Includes referral to agencies and stakeholders, and consultation with First Nations * Rejected – An application is rejected. Either the application standards are not met or requested documentation or security was not provided * Received – The NoW application has been sent from virtual FrontCounterBC to the ministry database * No Permit Required – Category when an inspector reviews the application and non-mechanized disturbance does not require a permit, for example an IP survey * Referral Complete – Referral and consultation is complete. The government needs to action the next steps * Withdrawn – Client requested the application to be withdrawn * Pending verification – Category for records needing review and verification. Typically, these are historical NoW applications with approvals. Manual review is required * NULL value – missing status and application type   **For the public view, please be aware that the ministry:** * Only shows mine commodities of gold or jade/nephrite in the MINE_COMMODITY_DESC (MN_COMD) field. All other commodity values remain NULL (empty)

Holds historical data for mineral and placer, claims and leases, as well as, coal license applications, licenses and leases within the Province of British Columbia. This layer is utilized by Mineral Titles Online title history on the mineral, placer and coal viewers, respectively.

The dataset identifies the location and types of Areas of Natural and Scientific Interest (ANSIs) that are commonly used in maps for resource management purposes. Official GEO title: ANSI

TA_CROWN_INVENTORY_SVW contains the spatial representation (polygon) of active and applied for Crown Land Inventory Dispositions. Inventories are lands identified for review to determine the availability to market. The view was created to provide a simplified presentation of this single tenure type from the disposition information in the Tantalis operational system. The same content could be derived from the TA_CROWN_TENURES_SVW by filtering to this tenure type only

A hydrogeological unit is defined as any soil or rock unit or zone that by virtue of its hydraulic properties has a distinct influence on the storage or movement of groundwater. It is considered the main dataset from the GGP point of view. Hydrogeological units are ranked into five levels (from largest to smallest): 1) hydrogeological region, 2) hydrogeological context, 3) aquifer system, 4) hydrostratigraphic unit, and 5) aquifer. Here are formal definitions for these different types of hydrogeologic units. - Hydrogeological region Hydrogeological regions are areas in which the properties of sub-surface water, or groundwater, are broadly similar in geology, climate and topography. There are 9 such regions identified in Canada (ref?). - Hydrogeological context Hydrogeological contexts are units of reporting, conceptually narrower than regions, and are additionally delineated by physiographic and hydrogeological aspects. - Aquifer system ""A heterogeneous body of intercalated permeable and poorly permeable material that functions regionally as a water-yielding hydraulic unit; it comprises two or more permeable beds [aquifers] separated at least locally by aquitards [confining units] that impede groundwater movement but do not greatly affect the regional hydraulic continuity of the system"" (Poland et al., 1972). - Hydrostratigraphic unit (HSU) ""Body of sediment and/or rock characterized by ground water flow that can be demonstrated to be distinct under both unstressed (natural) and stressed (pumping) conditions, and is distinguishable from flow in other HSUs"" (Noyes et al.) - Aquifer ""A formation, group of formations, or part of a formation that contains sufficient saturated permeable material to yield significant quantities of water to wells and springs"" (Lohman et al, 1972, p. 21). The rank attribute is used to specify the scope of the described unit. The general principle behind this specification is to allow the same data structure to apply to various types of hydrogeological units, from the local aquifer to the almost continental hydrogeological region. The dataset includes properties such as identification, physiography, geology, aquifer description and properties, water balance, groundwater use and risk. It features numerical values or a general description when no values are available. The description can also be used to add context to the numerical values. For each property, metadata identifying the source of the original data, links to similar data in GIN, and description of the processes, algorithms or methodology used to obtain these datasets will be available to complement the data. This dataset is designed to capture and represent a set of synthesized information pertaining to hydrogeological units through maps and succinct table reports. Some attributes (or properties) of the dataset are irrelevant depending of the rank of the unit. In general, this dataset is organised to include multiple properties associated with aquifers and larger hydrogeologic units. These properties are grouped into categories, which include identification, physiography, geology, aquifer description, water balance, groundwater use and risk. The numerical values associated with each of the properties can be used to create thematic maps; hence, the importance of using standardized units of measurement and definitions for these properties. When numerical values are not available, a general description may be supplied instead. The description can also be used to add context to the numerical values. Because this dataset is the cornerstone of the national view on groundwater, supplemental contextual information (metadata) must be part of the data. Thus, for each property, metadata identifying the source of the original data, links to similar data in GIN, and a description of the processes, algorithms or methodology used to obtain these datasets will be available to complement the data.