Hydrogeological Regions provide a framework to introduce the regional hydrogeology of Canada and to connect apparently disparate studies into a broader framework. The hydrological regions are first order areas used to capture and summarize data that will help develop more detailed profiles of each region. Comparison of findings within and between regions will allow scalable extension to sub-regional and watershed scale mapping.Canada has been classified into nine principal hydrogeological regions. Each region is described briefly based on the following five hydrogeological characteristics (Heath, 1984):system components and geometry;water-bearing openings;rock matrix composition;storage and transmission;recharge/ discharge.The hydrogeological classification emphasizes major geological provinces and rock formations. Fundamental water-bearing openings and rock matrix properties help determine the quantity (storage), flux (transmission), and composition of formation waters. These same properties and any overlying sediment cover affect recharge/ discharge rates for regional formations. While regional attributes are general, a simple aquifer mapping scheme can further describe the nature and character of aquifers in each region. For example, general groundwater settings across the country could be described as has been done by USGS principal aquifers [1]. Thus the regional framework can potentially link from national scales to watershed scales by identifying typical aquifer types based on readily available geological maps that use water-bearing character as a common attribute.The nine hydrogeological regions include:CordilleraMountains with thin sediment over fractured sedimentary, igneous and metamorphic rocks of Precambrian to Cenozoic age. Intermontane valleys are underlain by glacial and alluvial deposits of Pleistocene age.Plains (Western Sedimentary Basin)Region-wide basin of sub-horizontal Paleozoic to Cenozoic sedimentary rocks are overlain by thick glacial deposits filling buried valleys. Incised post-glacial valleys provide local relief. Shallow gas, coal, and brines may occur.Canadian ShieldUndulating region of thin glacial sediment overlying complex deformed, fractured PreCambrian igneous, metamorphic and sedimentary rocks. Region contains several terrains: sedimentary basins, structural belts, and glacial-lacustrine basins.Hudson Bay (Moose River) BasinSedimentary basin of Paleozoic to Mesozoic sub horizontal carbonate and clastic sediment covered by surficial deposits, with low relief and poor drainage.Southern OntarioEastern Great Lakes region is underlain by gently-dipping Paleozoic, carbonate, clastic and gypsum-salt strata overlain by glacial sediments up to 200 m thick with tunnel valleys. Karst, bedrock valleys, shallow gas and brines are also important components.St. Lawrence LowlandsLowlands underlain by shallow-dipping Paleozoic sedimentary rocks and thick glacial sediment in glacial-marine basins. Appalachian and Precambrian uplands discharge water to valleys. Shallow gas and saltwater intrusion are possible.AppalachiaUpland to mountainous region with thin surficial sediment on folded Paleozoic sedimentary and igneous rocks. Range of rock types yields a wide range of water compositions. Valleys contain important alluvial aquifers.Maritimes BasinLowlands with flat-lying, Carboniferous clastic , salt, and gypsum rocks contain shallow coal deposits. Surface glacial sediment is thin and discontinuous. Salt water intrusion is possible.PermafrostArctic islands and most areas north of 60o contain frozen ground affects on groundwater flow. Diverse topography and geology define sub-regions of sedimentary basins and crystalline rocks. Glacial sediment is thin, discontinuous; local peat accumulations are significant.

Historic placer mining areas in Yukon can be grouped into ten areas: Klondike; Sixtymile; Fortymile; Clear Creek; Moosehorn Range; Stewart River; Whitehorse South; Mayo; Dawson Range and Livingstone Creek. Each area has its own geomorphic setting and depositional history which is related to its glacial history. Several Quaternary glacial advances have been described in Yukon, and these are generally divided into three episodes, commonly known as the pre-Reid, Reid and McConnell, in order of oldest to most recent.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

Yukon Territory has been glaciated by Cordilleran and montane glaciers at various times throughout the Pleistocene, as well as by continental ice, the Laurentine Ice Sheet in the Late Pleistocene. Throughout the Late Cenozoic, each successive glaciation appears to have been less extensive than the previous one. In west-central Yukon the earliest glaciation occurred between 2.6 and 2.9 Ma. ago (Duk-Rodkin and Barendregt, 1997). This glaciation was the most extensive and formed a continuous carapace of ice covering all the mountain ranges, except for a small area of Dawson Range and a more extensive area in northern Yukon. The Mid Pleistocene Cordilleran glaciation was less extensive than older glaciations but it formed an extensive ice sheet covering most of the northern Cordillera. The Late Pleistocene glaciation was the most restrictive and formed a continuous carapace of ice from the continental divide to the Saint Elias Mountains, but only restricted ice caps formed on the Ogilvie Mountains. During the last glaciation, the Laurentide Ice Sheet, flowing from the east, reached the northeast part of the Yukon Territory ca. 30 ka ago.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

This layer contains polygon features that represent granular aggregate deposits in New Brunswick. ‘Granular Aggregate’ is the term used to describe naturally occurring deposits of sand and gravel formed during the last ice-age when glaciers were melting and receding. These important resources, which are used for infrastructure construction and maintenance.

This layer contains polygon features that represent granular aggregate deposits in New Brunswick. ‘Granular Aggregate’ is the term used to describe naturally occurring deposits of sand and gravel formed during the last ice-age when glaciers were melting and receding. These important resources, which are used for infrastructure construction and maintenance.

This GIS dataset is part of a GIS version of AGS Map 150, Sheets 1 - 6, as mapped at 1:250,000-scale by Bayrock and Reimchen. The data represent the glacial features component of the maps.

This dataset represents surface to bedrock isopach (thickness in metres) map of glacial drift for the Province of Saskatchewan at 1:1 000 000 scale.This dataset represents surface to bedrock isopach (thickness in metres) map of glacial drift at 1:1 000 000 scale. This data was created as a file geodatabase feature class and output for public distribution. **Please Note – All published Saskatchewan Geological Survey datasets, including those available through the Saskatchewan Mining and Petroleum GeoAtlas, are sourced from the Enterprise GIS Data Warehouse.  They are therefore identical and share the same refresh schedule. 

This dataset shows the location of the distribution of uranium deposits for the Province of Saskatchewan.This dataset shows the uranium deposits for the Province of Saskatchewan and is designed for the Resource Map of Saskatchewan. Mapping in support of the dataset includes years of field observations which were then compiled and integrated into this dataset. The data was created as a file geodatabase feature class and output for public distribution. **Please Note – All published Saskatchewan Geological Survey datasets, including those available through the Saskatchewan Mining and Petroleum GeoAtlas, are sourced from the Enterprise GIS Data Warehouse.  They are therefore identical and share the same refresh schedule. 

This GIS dataset is part of a digital compilation of the bedrock geology of the Foremost area (NTS 72E). It is one of the datasets used to produce Alberta Geological Survey (AGS) Map 568. This dataset represents the compilation of existing geological maps and original geological mapping by AGS staff. Mapping included field observations and creating three-dimensional models of subsurface stratigraphy based on the interpretation of geophysical logs from oil and gas wells. Each three-dimensional formation surface was projected to a model of the bedrock surface, and the intersection formed the first approximation of the position of the geological contact at the base of the surficial deposits. We adjusted these preliminary contacts to honour outcrop data and the interpretation of the bedrock unit immediately below surficial deposits in individual wells. The data were created in file geodatabase format and output for public distribution in shapefile format. AGS Open File Reports 2010-10 and 2011-13 present additional information on data sources related to this dataset.

Deposit is the layer of loose material that covers rock. It may have been established during the retreat of the glacier at the end of the last glaciation or by other processes associated with erosion and sedimentation. The nature of the loose deposit is evaluated based on the shape of the land, its position on the slope, the texture of the soil, or other indicators. Surface deposit maps make it possible to distinguish the main categories of surface deposits, to know their nature, thickness and distribution on Quebec territory. The map of **surface deposits in the North** is a component of an extensive inventory carried out to meet knowledge acquisition needs as part of the economic, social and environmental development project “Plan Nord”. This inventory was carried out between 2010 and 2013. The mapping of surface deposits was carried out using a new approach based on remote sensing techniques. The interpretation was carried out by geomorphologists using RapidEye anaglyph (3D) satellite images with high spatial resolution (5 m). Ground and air control points allowed the validation of the interpreted information.Mapping is available throughout the country north of the 53rd parallel, which represents an area of approximately 680,000 km2. The minimum mapping area is 100 ha. **This third party metadata element was translated using an automated translation tool (Amazon Translate).**