The Georgia Basin Boundary dataset displays the extent of the Georgia Basin Ecosystem Initiative undertaken by the federal, provincial, and municipal governments. The objectives of the project are to support initiatives for clean air, clean water, habitat and species protection, and improved environmental decision-making in the Georgia Basin. The dataset consists of both a polygon layer and line layer

The Georgia Basin Boundary dataset displays the extent of the Georgia Basin Ecosystem Initiative undertaken by the federal, provincial, and municipal governments. The objectives of the project are to support initiatives for clean air, clean water, habitat and species protection, and improved environmental decision-making in the Georgia Basin. The dataset consists of both a polygon layer and line layer

The grid system used in Mineral Titles Online (MTO). This grid is used to determine the location of mineral and placer cell titles in B.C. The grid is designed based on the Mineral Title Online Grid Regulation. The mineral-placer grid does not show current cell availability status. The dataset is very large and cannot be downloaded for the entire province. Try selecting specific mapsheet grids or selecting by an area of interest to download in sections.

The HealthLink BC Mental Health and Substance Use (MHSU) data set includes the following: Programs that offer early intervention, transitional care or other services that supplement and facilitate primary and adjunctive therapies; which offer community mental health education programs; or which link people who are in need of treatment with appropriate providers. Programs that provide preventive, diagnostic and treatment services in a variety of community and hospital-based settings to help people achieve, maintain and enhance a state of emotional well-being, personal empowerment and the skills to cope with everyday demands without excessive stress or reliance on alcohol or other drugs. Treatment may include emotional support, introspection and problem-solving assistance using a variety of modalities and approaches, and medication, as needed, for individuals who have a substance use disorder involving alcohol and/or other drugs or for people who range from experiencing difficult life transitions or problems in coping with daily living to those with severe, chronic mental illnesses that seriously impact their lives. Multidisciplinary programs, often offered on an inpatient basis with post-discharge outpatient therapy, that provide comprehensive diagnostic and treatment services for individuals who have anorexia nervosa, binge-eating disorder, bulimia or a related eating disorder. Treatment depends on the specific type of eating disorder involved but typically involves psychotherapy, nutrition education, family counseling, medication and hospitalization, if required, to stabilize the patient's health. Alliance of Information & Referral Systems (AIRS) / 211 LA County taxonomy is the data classification used for all HealthLink BC directory data, including this MHSU data set (https://www.airs.org/i4a/pages/index.cfm?pageid=1). AIRS taxonomy and data definitions are protected by Copyright by Information and Referral Federal of Los Angeles County, Inc (https://211taxonomy.org/subscriptions/#agreement)

This is the spatial view used by Mineral Titles Online (MTO) on the mineral, placer and coal viewers. The spatial view combines the polygon information with attribute information for each title. Contains sub-surface title data in British Columbia for: - mineral claims, mining leases, mineral claim applications - placer claims, placer leases, placer claim applications - coal license applications, coal licenses, coal leases

Multi-Agency Ground Plot (MAGPlot) database (DB) is a pan-Canadian forest ground-plot data repository. The database synthesize forest ground plot data from various agencies, including the National Forest Inventory (NFI) and 12 Canadian jurisdictions: Alberta (AB), British Columbia (BC), Manitoba (MB), New Brunswick (NB), Newfoundland and Labrador (NL), Nova Scotia (NS), Northwest Territories (NT), Ontario (ON), Prince Edward Island (PE), Quebec (QC), Saskatchewan (SK), and Yukon Territory (YT), contributed in their original format. These datasets underwent data cleaning and quality assessment using the set of rules and standards set by the contributors and associated documentations, and were standardized, harmonized, and integrated into a single, centralized, and analysis-ready database. The primary objective of the MAGPlot project is to collate and harmonize forest ground plot data and to present the data in a findable, accessible, interoperable, and reusable (FAIR) format for pan-Canadian forest research. The current version includes both historical and contemporary forest ground plot data provided by data contributors. The standardized and harmonized dataset includes eight data tables (five site related and three tree measurement tables) in a relational database schema. Site-related tables contain information on geographical locations, treatments (e.g. stand tending, regeneration, and cutting), and disturbances caused by abiotic factors (e.g., weather, wildfires) or biotic factors (e.g., disease, insects, animals). Tree-related tables, on the other hand, focus on measured tree attributes, including biophysical and growth parameters (e.g., DBH, height, crown class), species, status, stem conditions (e.g., broken or dead tops), and health conditions. While most contributors provided large and small tree plot measurements, only NFI, AB, MB, and SK contributed datasets reported at regeneration plot level (e.g., stem count, regeneration species). Future versions are expected to include updated and/or new measurement records as well as additional tables and measured and compiled (e.g., tree volume and biomass) attributes. MAGPlot is hosted through Canada’s National Forest Information System (https://nfi.nfis.org/en/maps). ---------------------------------------------------LATEST SITE TREATMENTS LAYER:---------------------------------------------------Shows the most recently applied treatment class for each MAGPlot site. These treatment classes are broad categories, with more specific treatment details available in the full dataset.-----------NOTES:----------- The MAGPlot release (v1.0 and v1.1) does not include NL and SK datasets due to pending Data Sharing Agreements, ongoing data processing, or restrictions on third-party sharing. These datasets will be included in future releases. While certain jurisdictions permit open or public data sharing, given that requestor signs and adheres the Data Use agreement, there are some jurisdictions that require a jurisdiction-specific request form to be signed in addition to the Data Use Agreement form. For the MAGPlot Data Dictionary, other metadata, datasets available for open sharing (with approximate locations), data requests (for other datasets or exact coordinates), and available data visualization products, please check all the folders in the “Data and Resources” section below. Coordinates in web services have been randomized within 5km of true location to preserve site integrityAccess the WMS (Web Map Service) layers from the “Data and Resources” section below. A data request must be submitted to access historical datasets, datasets restricted by data-use agreements, or exact plot coordinates using the link below.NFI Data Request Form: https://nfi.nfis.org/en/datarequestform---------------------------------ACKNOWLEDGEMENT:--------------------------------- We acknowledge and recognize the following agencies that have contributed data to the MAGPlot database: Government of Alberta - Ministry of Agriculture, Forestry, and Rural Economic Development - Forest Stewardship and Trade Branch Government of British Columbia - Ministry of Forests - Forest Analysis and Inventory Branch Government of Manitoba - Ministry of Economic, Development, Investment, Trade, and Natural Resources - Forestry and Peatlands Branch Government of New Brunswick - Ministry of Natural Resources and Energy Development - Forestry Division, Forest Planning and Stewardship Branch Government of Newfoundland & Labrador - Department of Fisheries, Forestry and Agriculture - Forestry Branch Government of Nova Scotia - Ministry of Natural Resources and Renewables - Department of Natural Resources and Renewables Government of Northwest Territories - Department of Environment & Climate Change - Forest Management Division Government of Ontario - Ministry of Natural Resources and Forestry - Science and Research Branch, Forest Resources Inventory Unit Government of Prince Edward Island - Department of Environment, Energy, and Climate Action - Forests, Fish, and Wildlife Division Government of Quebec - Ministry of Natural Resources and Forests - Forestry Sector Government of Saskatchewan - Ministry of Environment - Forest Service Branch Government of Yukon - Ministry of Energy, Mines, and Resources - Forest Management Branch Government of Canada - Natural Resources Canada - Canadian Forest Service - National Forest Inventory Projects Office

The spatial representation for a polygon defining the area of the province defined as west of the Cascade Mountains

Historical finds of Pristiphora erichsonii

The PSAP (Public Safety Answering Point) Boundary layer defines the given 911 authority's geographic area for the primary providers of response services for the City of Whitehorse. The primary use for the PSAP Boundary is to route emergency requests. Each PSAP Boundary defines the geographic area of a PSAP that has primary responsibilities for an emergency request. This layer is used by the ECRF (Emergency Call Routing Function) to perform a geographic query to determine the PSAP to which an emergency request is routed.Data was modeled using the NENA NG9-1-1 GIS Data Template (NENA-REF-006. 2 -202 2 ).Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

GeoAI are buildings, hydrography, forests, and roads automatically extracted using Deep Learning models applied to a source dataset, typically aerial or satellite images. The primary aim of GeoAI is to increase Canada's availability of high-resolution foundational geospatial data for both spatial and temporal coverage.‌The infrastructure and expertise put in place by NRCan enables a rapid, efficient, and scalable data creation process through the use of leading-edge technology and Artificial Intelligence models. Published datasets for a given source can be revisited at a later date as more accurate models are developed and put into production. For now, only static files are available, but as the series develops, new products and services will be added.Several use cases of GeoAI data for change detection have been created. To view them, please follow the links below:- Iqaluit: https://open.canada.ca/data/en/dataset/ef29513d-a007-408c-beba-65f86e7b5b01- Calgary: https://open.canada.ca/data/en/dataset/bd07b597-5166-4b62-ae9c-245b3c62ea03- Québec City: https://open.canada.ca/data/en/dataset/4026720e-f7fb-478e-a58f-c62ebe20005d- Winnipeg: https://open.canada.ca/data/en/dataset/a6874aac-cfcd-4b92-bb3f-6031eedb5b57- Victoria: https://open.canada.ca/data/en/dataset/f011c7b9-f79e-42f8-9481-9bf9788bb189- Trois-Rivières: https://open.canada.ca/data/en/dataset/2b11a323-52c2-43d5-9c09-bc4b15b1bcc8