Water wells where ground water quality samples were collected by the Naquadat Program between 1954 and 1980

This product provides the ratio of surface freshwater intake to water yield for August 2013, with the exception of drainage regions 7, 8, 16, 17 and 18, which use the ratio of August intake to the long-term minimum monthly water yield. Surface freshwater intake aggregates data from the Survey of Drinking Water Plants, 2013 and the Industrial Water Use Survey, 2013 with estimates of agricultural water use for 2013 based on the Agricultural Water Use Survey and the Alberta Irrigation Information report. Data for water use by the oil and gas industry and households not supplied by a public water provider are also excluded.

This product provides the median of monthly maximum turbidity values (in nephelometric turbidity units) for drinking water facilities by drainage region. Turbidity refers to the relative cloudiness of water, caused by suspended particles in water. The Survey of Drinking Water Plants collected this monthly maximum turbidity data for surface water sources from facilities reporting turbidity data for at least 10 months in 2013. These facilities served 24 million people and produced 4,091 million cubic metres of potable water from surface water sources in 2013. Source water turbidity was monitored continuously at 42% of these drinking water plants in 2013, daily at 34% of plants and less frequently at the remaining plants.

Polygon features represent developed ground water aquifers in BC (that have been mapped). Most aquifer boundaries are delineated based on geology, hydrology and topographic information. Some aquifer boundaries stop at the border of BC mapsheet boundaries due to resource or data constraints at the time of mapping.

In permafrost dominated regions, a gap persists in our understanding of water resources, the influence of groundwater, and the impact of climate change at the regional scale. Regional scale modelling can help to advance the understanding of these impacts by integrating with regional climate models. For regional modelling to be tenable, ongoing development of modelling methods and conceptualizations is required. By developing a fully integrated numerical groundwater-surface water climate model using HydroGeoSphere (HGS) (Aquanty 2021) for a gauged basin within the discontinuous permafrost zone, this dataset allows the verification of existing numerical methods and the testing of various conceptualizations of integrated groundwater-surface water flow in permafrost regions at the regional scale. This work informs future modelling and forecasting of regional water resources in permafrost regimes.

Level below which soil or rock is saturated with water, in the well and at the time the level has been measured, expressed in m above the sea level. Groundwater depth is measured on the field, using a water level meters. The depth is then subtracted from the elevation of the measurement site to obtain the water level elevation. The dataset is a general description of the measurement site including location and well elevation. It features a series of points of the surface elevation of the groundwater body.

This map displays an assessment of groundwater quality risk for the agricultural area of Alberta. Agricultural activities that may have an impact on groundwater quality include livestock, crop production and agrochemical use. These activities along with the physical characteristics represented by aquifer vulnerability and available moisture were combined to produce this map. The classes shown on the map were ranked from 0 (lowest risk) to 1 (highest risk). This resource was created in 2005 using ArcGIS.

Point features showing the locations of groundwater wells which have lithology recorded. Each record in the dataset represents a lithology interval. Because each water well often has multiple lithology layers recorded, there will often be multiple points overlapped at each well location. For the locations of all water wells in BC (without lithology), please see: https://catalogue.data.gov.bc.ca/dataset/e4731a85-ffca-4112-8caf-cb0a96905778 > NOTE: When choosing to download this GIS dataset below, there can be errors when trying to download the entire province. The large file size is a problem for the default file format (shapefile). > If you need to download the entire province, please choose a different file format (e.g. ESRI File Geodatabase). > If you need to download in shapefile format, please use an area of interest (AOI).

Existing flood protection works (dikes and bank protection) crest alignment in British Columbia. Updated from available Provincial dike crest survey project data from 2019/2020. If 2019/2020 dike survey project data is unavailable, linework based on previous data from 2004 and prior. May include periodic updates depending on data provided by Diking Authorities and other sources. See Data Source under selected linework for details. For more information on dike management and safety, please see: https://www2.gov.bc.ca/gov/content/environment/air-land-water/water/drought-flooding-dikes-dams/integrated-flood-hazard-management/dike-management For contact names regarding regional diking issues, please see: https://www2.gov.bc.ca/assets/gov/environment/air-land-water/water/integrated-flood-hazard-mgmt/dike_safety_program_contact_list.pdf

Existing flood protection works appurtenances on or near dikes, for example, pump house, floodbox, culvert, gate, gauge, weir, etc. Updated from available Provincial dike survey project data from 2019/2020. If 2019/2020 dike survey project data is unavailable, appurtenance data based on previous data from 2004 and prior. May include periodic updates depending on data provided by Diking Authorities and other sources. See Data Source under selected appurtenance for details. For more information on dike management and safety, please see: https://www2.gov.bc.ca/gov/content/environment/air-land-water/water/drought-flooding-dikes-dams/integrated-flood-hazard-management/dike-management For contact names regarding regional diking issues, please see: https://www2.gov.bc.ca/assets/gov/environment/air-land-water/water/integrated-flood-hazard-mgmt/dike_safety_program_contact_list.pdf