This geodatabase includes hotspot maps of 1) nearshore habitat richness, 2) diversity (fish and invertebrates), and 3) biomass (using catch per unit effort of fish and invertebrates), as well as two layers showing the spatial extent of the diversity and biomass hotspot analyses. Full details and methods can be found in the Rubidge et al. 2018 CSAS Research Document 2018/053 available here or at https://waves-vagues.dfo-mpo.gc.ca/Library/40759842.pdf. These data were reviewed as part of a Canadian Science Advisory Secretariat (CSAS) regional peer review process on Nov 1-2, 2017.Habitat Richness Hotspots: Because there are no systematic surveys of nearshore species that span the entire coastline of Northern Shelf Bioregion, the nearshore habitat richness hotspots were developed as a proxy for species diversity in nearshore areas. Habitat richness was calculated from eight habitat features: eelgrass, surfgrass, canopy-forming kelp, estuaries, areas of high rugosity, and hard, mixed, and soft substrate. The number of features within 1 km x 1 km planning units was counted, and hotspots were identified using the Getis-Ord G* tool in ArcGIS. Planning units with Gi_Bin values of 3 (99% confidence) were classified as habitat richness hotspots.Diversity and Biomass Hotspots: Hotspots of fish and invertebrate diversity and biomass were developed as proxies for spatial patterns of productivity in the Northern Shelf Bioregion. Diversity (Shannon diversity) and biomass (kg/hour or count/hook/hour) were calculated from DFO synoptic trawl and outside hard-bottom longline (HBLL) survey catch records. The outside HBLL survey was previously referred to as Pacific Halibut Management Area (PHMA) survey. The synoptic trawl and HBLL surveys have complementary spatial coverage, with the HBLL surveys occurring in more coastal areas (20–260 m) and the synoptic trawl surveys occurring on deeper shelf areas (50–1300 m). Hotspots were identified using the Getis-Ord G* tool in ArcGIS for five separate analyses: fish biomass (trawl), fish diversity (trawl), fish diversity (longline), invertebrate biomass (trawl), and invertebrate diversity (trawl). Using the Minimum Bounding Geometry Tool, convex hull polygons were drawn around groups of hotspot points (Gi_Bin values of 1, 2, or 3; confidence ≥90%) containing 10 or more points. The resulting polygons were then buffered by 1 km and manually edited where needed to exclude any large areas of the polygons that did not include hotspot points.

Hotspots represent active wildfires. Natural Resources Canada Canadian Wild Fire Information System identifies them by processing Infrared satellite images. This layer contains the hotspots that are selected to be used as input for the Regional Air Quality Deterministic Prediction System FireWork (RAQDPS-FW) to enable forecasting air quality while taking into account wildfire emissions. Geographical coverage is Canada and the United States. The products are presented as historical annual compilations which highlight long-term trends in cumulative effects on the environment.

Since 2005, Fisheries and Oceans Canada has been collecting monitoring data for aquatic invasive species (e.g. https://open.canada.ca/data/en/dataset/8d87f574-0661-40a0-822f-e9eabc35780d, https://open.canada.ca/data/en/dataset/503a957e-7d6b-11e9-aef3-f48c505b2a29, https://open.canada.ca/data/en/dataset/8661edcf-f525-4758-a051-cb3fc8c74423). This monitoring data, as well additional occurrence information from online databases and the scientific literature, have been paired with high resolution environmental data and oceanographic models in species distribution models that predict the present-day and future potential distributions of 12 moderate to high risk invasive species on Canada’s east and west coasts. Future distributions were predicted for 2075, under Representative Concentration Pathway 8.5 from the Intergovernmental Panel on Climate Change’s fifth Assessment Report. Present-day and future richness of these species (i.e., hotspots) has also been estimated by summing their occurrence probabilities. This data set includes the occurrence locations of each species, the present-day and future species distribution modeling results for each species, and the estimated species richness. This research has been published in the scientific literature(Lyons et al. 2020).Lyons DA, Lowen JB, Therriault TW, Brickman D, Guo L, Moore AM, Peña MA, Wang Z, DiBacco C. (In Press) Identifying Marine Invasion Hotspots Using Stacked Species Distribution Models. Biological InvasionsCite this data as: Lyons DA., Lowen JB, Therriault TW., Brickman D., Guo L., Moore AM., Peña MA., Wang Z., DiBacco C. Data of: Species distribution models and occurrence data for marine invasive species hotspot identification. Published: November 2020. Coastal Ecosystems Science Division, Fisheries and Oceans Canada, Dartmouth, N.S. https://open.canada.ca/data/en/dataset/1bbd5131-8b34-4245-b999-3b4c4259d74f

Kernel density estimation (KDE) utilizes spatially explicit data to model the distribution of a variable of interest. It is a simple non-parametric neighbour-based smoothing function that relies on few assumptions about the structure of the observed data. It has been used in ecology to identify hotspots, that is, areas of relatively high biomass/abundance, and in 2010 was used by Fisheries and Oceans Canada to delineate significant concentrations of corals and sponges. The same approach has been used successfully in the Northwest Atlantic Fisheries Organization (NAFO) Regulatory Area. Here, we update the previous analyses with the catch records from up to 5 additional years of trawl survey data from Eastern Canada, including the Gulf of Saint Lawrence. We applied kernel density estimation to create a modelled biomass surface for each of sponges, small and large gorgonian corals, and sea pens, and applied an aerial expansion method to identify significant concentrations of these taxa. We compared our results to those obtained previously and provided maps of significant concentrations as well as point data co-ordinates for catches above the threshold values used to construct the significant area polygons. The borders of the polygons can be refined using knowledge of null catches and species distribution models of species presence/absence and/or biomass.

The Ministry of Health Service Provider Locations (MOHSERLO) geospatial dataset contains the locations of health service providers in Ontario.

This data set shows utility points that provide services for: * power * water * communications * heating fuel They include: * fibre optic stations * hydro stations * lock pumping stations This product requires the use of geographic information system (GIS) software.

The spatial representation for an Inventory Region or Compartment. Established by the Resource Inventory Branch, Inventory Regions are large drainages encompassing groups of small drainages also known as compartments. These were once used for planning purposes, similar to the current Planning Cells. They are now maintained in the files as reference for many administration boundaries

Work in progress during the current day on the territory of the City of Sherbrooke.attributs:ID - Unique identifierMunicipality - Municipality codeType - Type of workSub-type - Sub-type of workDescription - Description of the workDescription - Description of the workDescription - Description of the workConstruction - Construction unit - Unit of realization of the workLocation - Unit of realization of the workLocation - Street affected by the workIntersection - Intersection affected by the worksCivic number - Civic number concerned by the worksCivic number concerned by the worksCivic number concerned by the worksCivic number concerned by the worksConstruction - Unit of completion of the workLocation - Street affected by the workIntersection - Intersection affected by the worksNo_Civic - Civic number concerned by the worksCivic number concerned by the worksCivic number concerned by the worksCivic number concerned Voie_de - Cross lane from which the street is affected (see LOCATION) WAY_A - Cross lane up to which the street is affected (see LOCATION) DATE_START - Construction start date (UTC or local depending on the various formats offered) DATE_END - Construction end date (UTC or local depending on the various formats offered) TRAFFIC - Effect on trafficSignaler - Presence of signalersPresence of signalsSpeed - Modification of the speed limitSpeed - Modification of the speed limitPolice - Increased police presenceCoureWater - Cutoff in the drinking water supplyPerteAccess - Temporary loss of access to vehicle entrancesCommon transport - Possible disruption of public transitSchool - Presence of a school or school corridorCommerce - Presence of businessesSubsequent workSubsequent work - Planned subsequent workNote - Additional clarificationsDebuthe date - Construction start date (Eastern time) “YYYY-MM-DD HH:MM"datefinHE - Date of completion of work (Eastern time) “YYYY-MM-DD hh:mm”**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

Place locations captured at 1:1,000,000 scale using Digital Chart of the World (DCW) datasets as the base for the Yukon and surrounding area. Place locations were captured using DCW data, the Canadian Geographic Names Data Base (CGNDB) and hard copy Government of Canada Maps.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

Ski Resorts is a point dataset identifying the location of ski resorts in British Columbia.