The Waterbodies dataset is comprised of area features: lakes, intermittent waterbodies, islands, and rivers wide enough to be represented as an area feature (e.g. St. Lawrence River, Mackenzie River). In a few exceptional cases, islands had to be represented by "holes" in the polygons in the Waterbodies dataset. Some area features have been subdivided and several types of virtual linear features serve to separate them. Features in this dataset are linked (by an attribute) to their corresponding flow line in the Drainage Network Skeleton. Therefore the Waterbodies dataset may be used in conjunction with the Drainage Network Skeleton for analytical applications. The Islands dataset is comprised of area and linear features: islands within inland waters and the waterbodies and single line rivers within these islands. Oceanic islands are not included as they are part of the coastline component of the Drainage Network Skeleton dataset. The Islands dataset exists to complete the cartographic representation of Canadian hydrology. The Islands dataset is not logically connected with the Drainage Network Skeleton, and can not be used for analytical applications. It should be noted that flow lines of the Drainage Network Skeleton do not take into account of the existence of islands and therefore do not necessarily flow around them. In a few exceptional cases, islands had to be represented by "holes" in the polygons in the Waterbodies dataset. Some islands themselves contain waterbodies and rivers, not significant for network analysis. However, in order to support a complete cartographic representation such waterbodies and rivers have been added to the Islands dataset. The National Scale Frameworks Hydrology data consists of area, linear and point geospatial and attribute data for Canada's hydrology at a national scale. It provides a representation of Canada's surface water features, and data completeness reflects the content of the source, the original Vector Map level 0 (VMAP0) revision 4 hydrographic layers, except where revision editing has been performed. Key value-added characteristics include river flow direction, connectivity and the tagging of geographical name keys to selected rivers, lakes and islands included in the Concise Gazetteer of Canada.The Atlas Frameworks are a set of integrated base map layers which form part of a larger National Scale Frameworks data collection. These data have been compiled at a scale of 1:1 000 000 with the primary goal being to indicate correct relative positioning with other framework layers rather than absolute positional accuracy.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

Features in the Hydrology - Line layer are representations of creeks, streams, and rivers for the City of Whitehorse.Data was modeled using the NENA NG9-1-1 GIS Data Template (NENA-REF-006. 2 -202 2 ).Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

Hydraulic properties characterize a hydrogeological unit. The hydraulic properties considered for this dataset are the transmissivity, the hydraulic conductivity, the storage coefficient, the specific storage coefficient and the porosity. Hydraulic properties are estimated by performing aquifer tests (pumping tests, slug tests). The hydraulic tests and their duration are managed in this dataset. The methods used to create the dataset are described in the metadata associated with the dataset. The dataset exhibits a general description of hydraulic properties of the hydrogeological unit, including hydraulic test, total test duration, method and date. It includes numbers and/or ranges describing the aquifer tests results. Note that an alternate raster representation could be used in complement to the discrete point-based representation.

Groundwater flow is the movement of water in an aquifer or hydrogeological unit. The dataset shows groundwater flow rate and direction in the hydrogeological unit. Groundwater flow is establish from piezometric surface map. The method used to create the dataset is described in the metadata associated with the dataset. The dataset represents a description of the flow, including rate in m/d, direction, date and source. Typically, the data provided will not be in the form of a shapefile with linked properties but in the form of an image that sketches the groundwater flow. The image could also represent a cross section of the hydrogeologic units showing the regional trends of the groundwater flow.

The Single Line Hydrography Network (SLNET) contains all captured single line representations of hydrographic features. In addition, single line representations of polygonal features and single line arbitrary network connectors are in the file.

A feature is a representation of a real world object, such as a lake, stream, dam or rapid. There are three hydrographic feature classes:  points, lines and polys.   All may impede or be hazardous to waterflow and/or navigation on a watercourse or waterbody. This data shows natural and manmade line features. Examples include: * break walls * dams * waterfalls * lock-gates * rapids * rocks * Sea Lamprey barriers * shipwrecks This product requires the use of geographic information system (GIS) software. [Technical Bulletin: Data migrated to new Ontario Hydro Network (OHN) - Hydrographic Feature Data Classes (PDF)](http://geo2.scholarsportal.info/proxy.html?http:__maps.scholarsportal.info/files/PDFS/public/OGDE/OHN/TB-HydrographicFeatureClasses_Implementation_100908.pdf)

All manmade waterbodies, including reservoirs and canals, for the province

This dataset represents unique Ontario waterbody location identification information including: * unique identifiers * geographic coordinates * geographic township * municipality * waterbody names, official and local (unofficial) This is a derived dataset from [Named geographic features](https://data.ontario.ca/dataset/named-geographic-features). This dataset should not be used as a source for official waterbody names. For more information on using Geographic Names, visit [Geographic names](https://www.ontario.ca/page/geographic-names).

Boundaries (polygons) of areas designated as community watershed by government - that are all or part of the drainage area that is upslope of the lowest point from which water is diverted for human consumption by a licensed waterworks, if satisfied that, to protect the water that is diverted for human consumption, the area requires special management that is not otherwise provided for under this regulation or other enactment: to conserve the quality, quantity and timing of water flow; or to prevent cumulative hydrological effects that would have a material adverse effect on the water . Supercedes the '(DEPRECATED) BC Community Watersheds' dataset BC_COMMUNITY_WATERSHEDS

All island polygons. Islands may overlap as there are islands within islands (e.g., a lake on an island contains an island). GNIS_NAME_1 contains the most atomic name for the island. For example, there are 3797 "Haida Gwaii" islands. If the island has not been named as part of a more specific group or with an individual name, "Haida Gwaii" is the GNIS_NAME_1 value. GNIS_NAME_2 and GNIS_NAME_3 values are null. If the island has a more specific name, "Haida Gwaii" moves to GNIS_NAME_2, and the more atomic name, such as "Moresby Island" is the GNIS_NAME_1. If the island has an individual name, belongs to a group, and is part of Haida Gwaii, the same logic of naming from most to least specific applies. For example, GNIS_NAME_1 = "George Island", GNIS_NAME_2 = "Copper Islands", GNIS_NAME_3 = "Haida Gwaii".