Background:More than 80% of the heat produced in the Earth's crust comes from granitoid rocks. When granitoid rocks form they naturally concentrate radioactive elements such as U, Th, and K, and the radiogenic decay of these elements is an exothermic reaction. The radioactive decay of these elements within a granitoid body may generate local heat anomalies and elevated geothermal gradient at relatively shallow crustal levels. In combination with other local rock properties (e.g, porosity, permeability, thermal conductivity), radiogenic heat has the potential to generate a geothermal resource. The decay of radioactive elements converts mass into radiation energy, which in turn gets converted to heat. While all naturally radioactive isotopes generate some heat, significant heat generation only occurs from the decay of 238 U ,235 U ,232 Th and 40 K. Therefore, potential heat production is governed by the concentrations of U ,Th and K in the rock. In igneous rocks, radiogenic heat production is dependent on the bulk chemistry of the rock and decreases from acidic (e.g. granite) through basic to ultra basic rock types. Therefore, granites with anomalously high concentrations of U ,Th and K are targets for calculating potential radiogenic heat production. Potential radiogenic heat production (A)from plutonic rocks can be calculated using this equation:A (\\u03BCW/m 3 )=10 -5 \\u1D29 (9.52c u +2.56c K +3.48c Th )where "c" is the concentration of radioactive elements "U" and "Th" in ppm, and "K" in %; and "\\u1D29" is the rock density. Heat production constants of the natural radio-elements U, Th, K are 9.525x10 -5 , 2.561x10 -5 and 3.477x10 -9 W/kg, respectively.Data and Methods:Geochemical data from \~1760 samples of plutonic rocks from Yukon are used to calculate potential heat production. The calculated values for radiogenic heat production (A) are plotted over the mapped distribution of Paleozoic and younger plutonic rocks and major crustal faults are also shown for reference.

The bedrock geologic units designate units of the same types of rock which composed the solid rock exposed at ground surface (as outcrop) or which underlies unconsolidated surficial sediments. This dataset represents a general description of the stratigraphy and geology, including geologic unit thickness, morphology, age and rank. It features a list of the geologic unit names and types of rock (lithology) in the hydrogeological unit, from a controlled vocabulary. While the preferred format to deliver this data is by using a shapefile and its linked attributes, this dataset can be delivered also by providing link to external data which should have at least the same properties or also by joining a georeferenced image of the map.

Level below which soil or rock is saturated with water, in the well and at the time the level has been measured, expressed in m above the sea level. Groundwater levels measured are interpolated / extrapolated to obtain groundwater level on every cell of the hydrogeological unit raster. Surfer and ArcGis are the software usually used to create groundwater level raster. The dataset designates a raster with a groundwater level, for each cell of the hydrogeological unit.

The lithogeochemical data provides the chemical composition of rock samples. This data helps characterize the rocks and can be used to understand their mode of formation.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

A claim is a parcel of land located or granted for hard rock mining. A claim also includes any ditches or water rights used for mining the claim, and all other things belonging to or used in the working of the claim for mining purposes. A claim is a rectangular plot of ground that does not exceed 1,500' X 1,500'. All angles of a claim must be right angles, except in cases where a boundary line of a previously located claim is adopted as common to both locations.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

Sub-surface facilities used for storing natural gas. The facilities are usually hollowed-out salt domes, geological reservoirs (depleted oil or gas field) or water bearing sands (called aquifers) topped by an impermeable cap rock.Mapping Resources implemented as part of the North American Cooperation on Energy Information (NACEI) between the Department of Energy of the United States of America, the Department of Natural Resources of Canada, and the Ministry of Energy of the United Mexican States.The participating Agencies and Institutions shall not be held liable for improper or incorrect use of the data described and/or contained herein. These data and related graphics, if available, are not legal documents and are not intended to be used as such. The information contained in these data is dynamic and may change over time and may differ from other official information. The Agencies and Institutions participants give no warranty, expressed or implied, as to the accuracy, reliability, or completeness of these data.

The Yukon Territory is underlain by a great variety of rock types ranging in age from Early Proterozoic to Recent and representing diverse environments including epicratonic basins, subsiding shelves, foreland basins, island arcs and deep ocean basins. Episodes of compressional and extensional deformation, transcurrent faulting, metamorphism and plutonism further complicate the map pattern. This complex geological record has been described in terms of the interactions of several terranes (large parts of the earth's crust which preserve a common geological record) with each other and with the margin of ancestral North America.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

Hydrogeological Regions provide a framework to introduce the regional hydrogeology of Canada and to connect apparently disparate studies into a broader framework. The hydrological regions are first order areas used to capture and summarize data that will help develop more detailed profiles of each region. Comparison of findings within and between regions will allow scalable extension to sub-regional and watershed scale mapping.Canada has been classified into nine principal hydrogeological regions. Each region is described briefly based on the following five hydrogeological characteristics (Heath, 1984):system components and geometry;water-bearing openings;rock matrix composition;storage and transmission;recharge/ discharge.The hydrogeological classification emphasizes major geological provinces and rock formations. Fundamental water-bearing openings and rock matrix properties help determine the quantity (storage), flux (transmission), and composition of formation waters. These same properties and any overlying sediment cover affect recharge/ discharge rates for regional formations. While regional attributes are general, a simple aquifer mapping scheme can further describe the nature and character of aquifers in each region. For example, general groundwater settings across the country could be described as has been done by USGS principal aquifers [1]. Thus the regional framework can potentially link from national scales to watershed scales by identifying typical aquifer types based on readily available geological maps that use water-bearing character as a common attribute.The nine hydrogeological regions include:CordilleraMountains with thin sediment over fractured sedimentary, igneous and metamorphic rocks of Precambrian to Cenozoic age. Intermontane valleys are underlain by glacial and alluvial deposits of Pleistocene age.Plains (Western Sedimentary Basin)Region-wide basin of sub-horizontal Paleozoic to Cenozoic sedimentary rocks are overlain by thick glacial deposits filling buried valleys. Incised post-glacial valleys provide local relief. Shallow gas, coal, and brines may occur.Canadian ShieldUndulating region of thin glacial sediment overlying complex deformed, fractured PreCambrian igneous, metamorphic and sedimentary rocks. Region contains several terrains: sedimentary basins, structural belts, and glacial-lacustrine basins.Hudson Bay (Moose River) BasinSedimentary basin of Paleozoic to Mesozoic sub horizontal carbonate and clastic sediment covered by surficial deposits, with low relief and poor drainage.Southern OntarioEastern Great Lakes region is underlain by gently-dipping Paleozoic, carbonate, clastic and gypsum-salt strata overlain by glacial sediments up to 200 m thick with tunnel valleys. Karst, bedrock valleys, shallow gas and brines are also important components.St. Lawrence LowlandsLowlands underlain by shallow-dipping Paleozoic sedimentary rocks and thick glacial sediment in glacial-marine basins. Appalachian and Precambrian uplands discharge water to valleys. Shallow gas and saltwater intrusion are possible.AppalachiaUpland to mountainous region with thin surficial sediment on folded Paleozoic sedimentary and igneous rocks. Range of rock types yields a wide range of water compositions. Valleys contain important alluvial aquifers.Maritimes BasinLowlands with flat-lying, Carboniferous clastic , salt, and gypsum rocks contain shallow coal deposits. Surface glacial sediment is thin and discontinuous. Salt water intrusion is possible.PermafrostArctic islands and most areas north of 60o contain frozen ground affects on groundwater flow. Diverse topography and geology define sub-regions of sedimentary basins and crystalline rocks. Glacial sediment is thin, discontinuous; local peat accumulations are significant.

The Bedrock Index provides a spatial record of the location of all Bedrock maps published by the Geological Survey of Canada and hosted on Geoscan. The index has three "series" of maps; CGM, A series, and preliminary maps. In cases where there have been multiple editions of a map, the most recent record is reported in the Bedrock Index attribute table. Maps published in Open File documents are not recorded in the bedrock index. The "A" series maps were produced from 1909 to 2010 and have been replaced by the CGM (Canadian Geoscience Maps) series. CGM maps began production in 2010 and are still being published. Preliminary maps were published from 1941 to 2021.

Geochemistry includes information related to rock samples and sediment samples.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**