The Itcha Ilgachuz Caribou Habitat Area (IICHA) and associated quadrants were developed as a part of the 2002 Northern Caribou Strategy, with revisions in 2011. The boundary is based on caribou telemetry to 2011, and is used to form the outer boundary of the quadrants that are used to help determine the rate of cut within WHA 5-086.

The spatial representation for a Tree Farm Licence Addition, which is forest land designated by the Ministry to be added to an established Tree Farm Licence Schedule A or B For further information on Tree Farm Licenses please visit this website: https://www2.gov.bc.ca/gov/content?id=A93E6DFD8C164AD19CD17880450289A3

The spatial representation for a Tree Farm Licence Deletion, which is forest land within the Tree Farm Licence that is being removed from the Tree Farm Licence Schedule 'A' or 'B' For further information on Tree Farm Licenses please visit this website: https://www2.gov.bc.ca/gov/content?id=A93E6DFD8C164AD19CD17880450289A3

Wildlife Key Areas (WKA) are locations used by wildlife for critical, seasonal life functions. WKAs are identified by interpreting observed locations of wildlife at key times of year, not through intensive habitat assessment. Polygons derived from interviews with locals and from GIS interpretation of wildlife/habitat surveys. GIS interpretation follows criteria specific for taxon and/or populations of taxon. Key Areas are based on observed locations of wildlife at key times of year, not on habitat assessment. With new information, boundaries and designations of Key Areas can change and additional Key Areas can be identified. Furthermore, Key Areas are not the only sites important for wildlife. Other information sources can identify other sites important for wildlife for reasons outside the scope of the WKA Inventory Program. Updates to Key Areas occur only periodically. For the most current information, please consult with the Regional Biologist for your area of interest. If you have questions or would like to contribute to the WKA database, please contact the WKA Inventory Program ( [wka@yukon.ca](mailto:wka@yukon.ca) ).Distributed from [GeoYukon](https://mapservices.gov.yk.ca/GeoYukon/) by the [Government of Yukon](https://yukon.ca/) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

Game Hunting Areas (GHAs) are defined under the Hunting Areas and Zones Regulation (220/86) of The Wildlife Act (CCSM c. W130).Game Hunting Areas (GHAs) are defined under the Hunting Areas and Zones Regulation (220/86) of The Wildlife Act (CCSM c. W130). Game Hunting Areas are used to support boundaries for species specific hunting seasons, harvest allocations, bag limits, and associated regulations. Refer to the Hunting Areas and Zones Regulation for GHA boundary descriptions.

The spatial representation for current Timber Supply Areas (TSA). A Timber Supply Area is a designated area established by the Ministry in order to practice sound, integrated, resource management principles to improve the allowable annual cuts. TSAs were originally defined by an established pattern of wood flow from management units to the primary timber-using industries. They are the primary unit for allowable annual cut (AAC) determination.

The Forest Change Type data described here is an update to previously posted open data. The date range for this data is 2012 to 2015. The Forest Change Type data for the prior period from 1985 to 2011 can be found here: https://opendata.nfis.org/mapserver/nfis-change_eng.html or https://gcgeo.gc.ca/geonetwork/search/eng search for “Forest Change” but you must be logged in to see the data. It is developed within the framework of Canada’s National Terrestrial Ecosystem Monitoring System (NTEMS).The forest change data included in this product is national in scope (entire forested ecosystem) and represents the first wall-to-wall characterization of wildfire and harvest in Canada at a spatial resolution commensurate with human impacts. The information outcomes represent 25 years of stand replacing change in Canada’s forests, derived from a single, consistent spatially-explicit data source, derived in a fully automated manner. This demonstrated capacity to characterize forests at a resolution that captures human impacts is key to establishing a baseline for detailed monitoring of forested ecosystems from management and science perspectives. Time series of Landsat data were used to characterize national trends in stand replacing forest disturbances caused by wildfire and harvest for the period 1985–2010 for Canada's 650 million hectare forested ecosystems (https://authors.elsevier.com/sd/article/S0034425717301360). Landsat data has a 30m spatial resolution, so the change information is highly detailed and is commensurate with that of human impacts. These data represent annual stand replacing forest changes. The stand replacing disturbances types labeled are wildfire and harvest, with lower confidence wildfire and harvest, also shared. The distinction and sharing of lower class membership likelihoods is to indicate to users that some change events were more difficult to allocate to a change type, but are generally found to be in the correct category. For an overview on the data, image processing, and time series change detection methods applied, as well as information on independent accuracy assessment of the data, see Hermosilla et al. (2016; http://www.tandfonline.com/doi/full/10.1080/17538947.2016.1187673).The data available is, 1. a binary change/no-change; 2. Change year; and, 3. Change type. When using this data, please cite as: Hermosilla, T.,Wulder, M. A.,White, J. C.,Coops, N. C.,Hobart, G. W., (2017). Updating Landsat time series of surface-reflectance composites and forest change products with new observations. International Journal of Applied Earth Observation and Geoinformation. 63: 104-111. DOI: 10.1016/j.jag.2017.07.013 White, J.C., M.A. Wulder, T. Hermosilla, N.C. Coops, and G. Hobart. (2017). A nationwide annual characterization of 25 years of forest disturbance and recovery for Canada using Landsat time series. Remote Sensing of Environment. 192: 303-321. DOI: 10.1016/j.rse.2017.03.035.

Caribou habitat management areas identify zones ("tiers") with similar importance to caribou, potential risks and primary strategies for caribou conservation.These Final Caribou Habitat Management Areas (CHMAs) are based on known woodland caribou use and habitat potential mapping; in addition, levels of both human-caused and wildfire disturbances were also taken into consideration. Tier 1 areas were selected because they include high-moderate caribou habitat potential with high levels of observed caribou use and low levels of human-caused disturbance. Tier 2 areas were selected because they include areas of high-moderate woodland caribou habitat potential with observed use and higher levels of wildfire and human-caused disturbance. Tier 3 areas provide general habitat and maintain habitat connectivity between Tier 1 and Tier 2 areas. These areas are not permanent: they will be updated as habitat conditions, land use and caribou populations change over time. Different strategies have been developed for each Tier based on their stated management objectives and relative importance to and known use by caribou, current habitat condition and potential risks.  A two page overview of the SK2 East Woodland Caribou Range Plan and the CHMAs can be viewed here: https://publications.saskatchewan.ca/api/v1/products/127215/formats/149989/download Find out more about woodland caribou and what the province is doing to manage their habitat and protect their populations: https://www.saskatchewan.ca/business/environmental-protection-and-sustainability/wildlife-and-conservation/wildlife-species-at-risk/woodland-caribou-program

The purpose of this feature layer is to provide the 1997 overland flooding boundary in the Red River Valley.This dataset shows the extent of peak overland flooding in the Red River Valley in 1997 . Data is based on RADARSAT – 1 satellite imagery. During processing, the raw data set was resampled to 12.5 meter pixel resolution, then classified using PCI Geomatica software which is a specialized software designed to manipulate space born imagery. The final output depicting the flooding boundary is available as a TIFF or Shapefile. Launched in November 1995, RADARSAT-1 was a Canadian-led project which provided useful information to both commercial and scientific users in such fields as disaster management, agriculture, cartography, hydrology, forestry, oceanography, ice studies and coastal monitoring. Equipped with a powerful synthetic aperture radar (SAR) instrument, it acquired images of the Earth day or night, in all weather and through cloud cover, smoke and haze. As of March 2013, the satellite was declared non-operational and is no longer collecting data. Many applications were developed to take advantage of RADARSAT-1 capacity for detecting the presence of water. These included monitoring flooding and the build-up of river ice, and mapping the melting of snow-covered areas. When used for flood monitoring, RADARSAT-1 data helped assess the impact of flooding, predicted the extent and duration of floodwaters, analyzed the environmental impact of water diversion projects, and developed flood mitigation measures. Fields Included:FID : Internal feature numberNAME : Flooded area nameAREA_SQKM : Size of flooded area

PURPOSE:From August 1st to September 11th, 2014, Fisheries and Oceans Canada conducted a baseline survey of marine fishes and their habitats in the southern Canadian Beaufort Sea and Amundsen Gulf as part of the Beaufort Regional Environmental Assessment (BREA) called the Beaufort Sea Marine Fishes Project (BSMFP). Sampling was conducted from the F/V Frosti at 54 stations along 14 transects. Standardized sampling was conducted at pre-determined depth stations (20-1500 m) using benthic trawling nets. The BSMFP is the first research project to use large research trawls to assess the biodiversity and abundance of offshore marine fishes in this area. In total, 42 species of fish were caught. This report contains information on fishing net deployments, catch per unit effort (CPUE), and basic biological data for all fishes caught.DESCRIPTION:Basic biological data for all fish caught during the 2014 BSMFP expedition. Includes identification, weight, length (total, fork, and, standard), liver weight, gonad weight, sex and maturity level. PARAMETERS COLLECTED:familyspeciesweighttotal lengthfork lengthstandard lengthliver weightgonad weightsexmaturitySAMPLING METHODS:Various trawl types.