This map data displays environmentally impacted sites in Saskatchewan with location, confirmed substance and current status.The Ministry of Environment is responsible for regulating environmentally impacted sites in Saskatchewan to protect the environment and the public.  An environmentally impacted site is an area of land or water that contains a substance that may cause or is causing an adverse effect.An adverse effect is an impairment of or damage to the environment or harm to human health caused by any chemical, physical or biological alterations or any combination of them.Please note: information may take up to 30 days to be updated and is subject to change at any time.For further information, please contact the Ministry of Environment Inquiry Centre (Toll Free): 800-567-4224, centre.inquiry@gov.sk.ca or visit the environmentally impacted sites page on Saskatchewan.ca. Terms and definitionsObject ID: An internal GeoHub record ID number. This number can be ignored.  Case ID: The Case ID is the ministry’s file number – a unique identifier. It is NOT the date the site became impacted.  Status – The stages of management for an environmentally impacted site.   Notification: The ministry has received notification that pollutants have been discovered at the site.  The concentration of this pollutant exceeds the threshold outlined in the Saskatchewan Environmental Code and must be reported. The pollutants may cause an adverse effect to the environment or human health. The ministry has been made aware of this and has determined that the site is an environmentally impacted site. Assessment: The site is currently undergoing, or has recently completed, analysis to determine the cause, nature or extent of potential or existing adverse effect (e.g. a Phase 2 Environmental Site Assessment). Corrective Action Plan: The site is currently undergoing, or has recently completed, activity that aims to prevent, minimize, mitigate, remedy or reclaim adverse effects (e.g. removal of impacts by excavation). Closure: This is a historical status term for environmentally impacted sites that is no longer used. The Notice of Site Condition status replaces the former status of Closure. It indicates that corrective actions have been completed at the site, endpoints have been achieved and an updated environmental status of the site has been provided to the ministry. However, no application has been made for a Notice of Site Condition certificate.  Notice of Site Condition: The ministry is satisfied that an acceptable risk level exists for the area of the site addressed in the corrective action plan. Confirmed substance: The substances of concern at the site. Examples that may cause an adverse effect are petroleum hydrocarbons, toxic metals, air pollutants, acids and solvents.

The Drought Impact Lines dataset highlights areas that have been physically impacted by drought. All drought impact lines have a drought impact label inside of them to express the longevity of the impact.The impact lines are classified using impact labels as follows:S – Short-Term, typically less than 6 months.L – Long-Term, typically more than 6 months.SL – A combination of Short and Long-Term impacts.

A Township is a land subdivision in Ontario. This information was captured through the Ontario Base Mapping Program, is maintained by the Ministry of Natural Resources and distributed through Geospatial Ontario (GEO) Warehouse. The spatial accuracy for some of the townships was improved through the Ontario Parcel, Township Realignment and Township Improvement projects. Improvements may include: * road allowance widths * spatial changes to better represent where the township boundaries are located * more consistent concession names Materials used to improve the location of township lines may include: * township Improvement plots * survey information i.e. retracements * original township plans * surveys notes * the physical features e.g. fence lines in the corporate editing environment * water bodies * GPS Ontario Road Network geometry This product requires the use of geographic information system (GIS) software.

The assessments layer represents all assessments undertaken under the Impact Assessment Act, including those that continue under the provisions of the Canadian Environmental Assessment Act, 2012. It includes assessments undertaken by the Impact Assessment Agency and other federal authorities as posted on the Canadian Impact Assessment Registry Internet site. The location of a given assessment included in the dataset is approximate and is based on information submitted by proponents, if applicable. More than one location may be identified for a given assessment. This dataset does not include information related to the footprint.Additional information about this dataset is available on the Canadian Impact Assessment Registry Internet site.

Forest Elevation(Ht) Mean 2015Mean height of lidar first returns (m). Represents the mean canopy height. It is developed within the framework of Canada’s National Terrestrial Ecosystem Monitoring System (NTEMS). Products relating the structure of Canada's forested ecosystems have been generated and made openly accessible. The shared products are based upon peer-reviewed science and relate aspects of forest structure including: (i) metrics calculated directly from the lidar point cloud with heights normalized to heights above the ground surface (e.g., canopy cover, height), and (ii) modelled inventory attributes, derived using an area-based approach generated by using co-located ground plot and ALS data (e.g., volume, biomass). Forest structure estimates were generated by combining information from lidar plots (Wulder et al. 2012) with Landsat pixel-based composites (White et al. 2014; Hermosilla et al. 2016) using a nearest neighbour imputation approach with a Random Forests-based distance metric. These products were generated for strategic-level forest monitoring information needs and are not intended to support operational-level forest management. All products have a spatial resolution of 30 m. For a detailed description of the data, methods applied, and accuracy assessment results see Matasci et al. (2018). When using this data, please cite as follows: Matasci, G., Hermosilla, T., Wulder, M.A., White, J.C., Coops, N.C., Hobart, G.W., Bolton, D.K., Tompalski, P., Bater, C.W., 2018b. Three decades of forest structural dynamics over Canada's forested ecosystems using Landsat time-series and lidar plots. Remote Sensing of Environment 216, 697-714. Matasci et al. 2018) Wulder et al. 2018)Geographic extent: Canada's forested ecosystems (~ 650 Mha)Time period: 1985–2011

Miscellaneous events are often the result of the cumulative impact of a combination of abiotic, insect and disease agents or events. For example, Aspen decline where repeated infestations of Forest Tent Caterpillar, are combined with several seasons of prolonged drought. The Government of Ontario tracks forest damage events to help proactively manage the detrimental effects to our forests.   We monitor the threat and spread of invasive forest pest insect species in Ontario. The data is also important to the Forest Management Planning process in calculating timber volume loss within affected areas. This product requires the use of geographic information system (GIS) software.

The purpose of this dataset is to provide the public with the areal extents of the 14 watershed districts in Manitoba.The Watershed Districts Act , proclaimed on January 1, 2020, transitioned 18 conservation districts to 14 watershed districts, with boundaries based on watersheds. Along with this change, the Manitoba Conservation Districts Program was renamed the Manitoba Watershed Districts Program, and the program was modernized to enhance watershed-based water management in Manitoba. The goal of the program is to create healthy and sustainable watersheds through land and water stewardship programs and partnerships. With funding from the Manitoba government and municipal partners, locally-appointed watershed district boards make planning and management decisions to improve watershed health across most of rural Manitoba. Fields included ( Alias (Field Name): Field description.)FID (FID): Sequential unique whole numbers that are automatically generatedWatershed District Name (WSD_Name): Name of the Watershed DistrictArea_SqKm (Area_SqKm): Area in square kilometres of the watershed district

Flood extent polygons from the last three days in selected Canadian regions that have been designated for observation, monitored by Natural Resources Canada using satellite imagery for emergency response. Coverage is not comprehensive nationwide. In response to large flood events, Natural Resources Canada (NRCan), for the provision of emergency geomatics services, may be activated by Canada’s emergency management protocols. As new satellite imagery becomes available, NRCan will extract flood extent polygons and update the dataset in near real time (4 hours). This item contains the latest flood products generated in the past three days. For any data older than 72 hours, please refer to the [Floods in Canada - Current Year](https://open.canada.ca/data/en/dataset/b1afd8d2-6e14-4ec4-9a09-652221a6cb71) entry. Note that the web mapping service may not display data if flood polygons have not been published by the EGS in the past three days. The flood products generated are validated on a best effort basis. Various factors may affect the quality of the flood polygons. These factors include, but are not limited to, sensor type, image resolution, cloud cover or limitations of the flood polygon extraction method. In this layer, where possible, a symbology is applied to the flood polygons based on the underlying land use classification, or is simply unclassified and shows the raw flood extent. When using Web mapping services, to display a specific product, filter by date (UTC Date) and area of interest (AOI). Also, a link to download each product directly is available in the Resources section. This prepackaged and compressed product contains a Shape file, a PDF file and a KMZ file. Disclaimer: Emergency response authorities are the primary users of these satellite-derived open water flood extent map products. These products are generated to provide analysis and emergency response situational awareness and to facilitate decision-making during major flood events. The open water flood extent products are generated rapidly and limited time is available for editing and validation. The flood products reflect the open water flood conditions at the date/time of acquisition. While efforts are made to produce high quality products, near-real time products may contain errors due to the limited time available for vector editing and validation. Please note that current algorithms do not map flooded areas under the forest canopy and are not optimized for urban flood mapping. Limitation of Liability: Accordingly, the information contained on this website is provided on an “as is” basis and Natural Resources Canada makes no representations or warranties respecting the information, either expressed or implied, arising by law or otherwise, including but not limited to, effectiveness, completeness, accuracy or fitness for a particular purpose. Natural Resources Canada does not assume any liability in respect of any damage or loss based on the use of this website. In no event shall Natural Resources Canada be liable in any way for any direct, indirect, special, incidental, consequential, or other damages based on any use of this website or any other website to which this site is linked, including, without limitation, any lost profits or revenue or business interruption. Parent Collection:- **[Floods in Canada - Cartographic Product Collection](https://open.canada.ca/data/en/dataset/08b810c2-7c81-40f1-adb1-c32c8a2c9f50)**

The Physical Exposure component of the National Human Settlement Layer (NHSL), defined here as the ‘Physical Exposure Model’, includes a delineation of settled areas and related land use across Canada, as well as information about buildings, persons, and building replacement values (structure and contents) within those areas.Buildings within the inventory are classified using a combination of occupancy types, engineering-based construction types adopted for Canada, and design levels representing the approximate building code requirements at the time of construction. The inventory is derived from detailed housing statistics provided at the dissemination area level as part of the 2016 national census and from georeferenced business listings. Building populations at different times of day are estimated for standard daytime hours (9am-5pm); for morning and evening commute hours (7am-9am; 5pm-7pm), and; for nighttime hours when the majority of people are home (7pm-7am). Replacement values are provided for structural, nonstructural, and contents components of buildings, based on industry replacement costs for representative regions across Canada.The physical exposure model is provided in two formats: (1) According to settled areas (i.e., polygons), which are areas that approximately delineate clusters of buildings across Canada. Summary statistics about buildings and populations within each settled area boundary are provided. (2) According to building archetypes (i.e., points) within settled areas. These are represented as point locations at the centroid of the corresponding settled area, and each settled area can have multiple point features corresponding to different building archetypes present within that area. In total, the model characterizes 35.2 million people in 9.7 million buildings across 390,000 locations with a total approximate replacement value of $8.2 trillion (2019 CAD) including contents.

An abiotic damage event is a non-biological event -- such as wind or an ice storm -- that has damaged areas of forested land. Abiotic damage event information is mainly used to: * generate summary maps for these events at a general or provincial scale * monitor the extent of damage for forest fire prevention purposes * calculate gross timber volume loss estimates caused by these events This product requires the use of geographic information system (GIS) software.