ENV - Environment and conservation (environment)Environmental resources, protection, and conservation. For example, resources describing pollution, waste storage and treatment, environmental impact assessment, environmental risk, and nature reserves. )

This map data displays environmentally impacted sites in Saskatchewan with location, confirmed substance and current status.The Ministry of Environment is responsible for regulating environmentally impacted sites in Saskatchewan to protect the environment and the public.  An environmentally impacted site is an area of land or water that contains a substance that may cause or is causing an adverse effect.An adverse effect is an impairment of or damage to the environment or harm to human health caused by any chemical, physical or biological alterations or any combination of them.Please note: information may take up to 30 days to be updated and is subject to change at any time.For further information, please contact the Ministry of Environment Inquiry Centre (Toll Free): 800-567-4224, centre.inquiry@gov.sk.ca or visit the environmentally impacted sites page on Saskatchewan.ca. Terms and definitionsObject ID: An internal GeoHub record ID number. This number can be ignored.  Case ID: The Case ID is the ministry’s file number – a unique identifier. It is NOT the date the site became impacted.  Status – The stages of management for an environmentally impacted site.   Notification: The ministry has received notification that pollutants have been discovered at the site.  The concentration of this pollutant exceeds the threshold outlined in the Saskatchewan Environmental Code and must be reported. The pollutants may cause an adverse effect to the environment or human health. The ministry has been made aware of this and has determined that the site is an environmentally impacted site. Assessment: The site is currently undergoing, or has recently completed, analysis to determine the cause, nature or extent of potential or existing adverse effect (e.g. a Phase 2 Environmental Site Assessment). Corrective Action Plan: The site is currently undergoing, or has recently completed, activity that aims to prevent, minimize, mitigate, remedy or reclaim adverse effects (e.g. removal of impacts by excavation). Closure: This is a historical status term for environmentally impacted sites that is no longer used. The Notice of Site Condition status replaces the former status of Closure. It indicates that corrective actions have been completed at the site, endpoints have been achieved and an updated environmental status of the site has been provided to the ministry. However, no application has been made for a Notice of Site Condition certificate.  Notice of Site Condition: The ministry is satisfied that an acceptable risk level exists for the area of the site addressed in the corrective action plan. Confirmed substance: The substances of concern at the site. Examples that may cause an adverse effect are petroleum hydrocarbons, toxic metals, air pollutants, acids and solvents.

The Global Environmental eMuLator (GEML) is a component of the experimental Global Deterministic Prediction System (GDPS) and is an artificial intelligence (AI)-based weather emulator trained on past atmospheric states. More specifically, this GEML model is based on data compatible with the ¼°, 13-level version of the GraphCast model (Lam et al. 2023) from DeepMind. It was trained and refined by ECCC, using ECMWF's ERA5 data (1979-2016) and operational analyses (2016-2021). The weights have been recalculated and are also available to the public. Forecasts are carried out twice daily, each with a 10-day lead time. It generates the reference large-scale temperature and horizontal wind fields, toward which GDPS's GEM forecasts are spectrally nudged. The geographical coverage is global with a horizontal resolution of 28 km. Data is available on 13 pressure levels, and employs a uniform latitude-longitude grid with 0.25-degree grid resolution. Six atmospheric variables defined on the 13 pressure levels, along with 4 surface variables are available every 6 hours.

The objective of the Independent Environmental Monitoring Program (IEMP) is to build Indigenous and public trust in the Canadian Nuclear Safety Commission's (CNSC) regulation of the nuclear industry, via an independent, technical and accessible environmental sampling program around nuclear facilities, while using CNSC resources effectively and efficiently. For more information: www.Nuclearsafety.gc.ca/IEMP

This theme represents an indicator of the availability of summer and winter surface water. It combines a sub-indicator of the pressure of water samples from surface water, and a sub-indicator of the severity of low water levels. The indicator is calculated based on the current and future climate.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

Temporal analysis of changes in Calgary, Alberta, based on GeoAI features automatically extracted from satellite images acquired in 2011 and 2021. Simple geospatial analysis intersecting Statistics Canada's Open Database of Buildings, version 3 (ODB v3) with GeoAI multidate building features enables the detection of buildings observed in 2021 that were not detected in 2011. The addition of new buildings is a good indicator of urban development and/or sprawl. Using the same approach, GeoAI multidate roads enable the detection of Statistics Canada's National Roads Network (NRN) segments present in 2021 and/or in 2011. The development of new roads is also indicator of urban development and/or sprawl. Complementarily, an analysis of changes in the forest coverage from the GeoAI datasets is done. This analysis reflects the gains and losses between both dates..‌GeoAI enables temporal coverage of various areas in Canada, thus providing a useful tool for change detection and trend analysis at high resolution. While the series is still fairly new, and such examples are limited for the time being, NRCan strives to gradually increase its GeoAI data offering for both spatial and temporal coverage.For more information about the GeoAI - GeoBase Series, please visit the following link: https://open.canada.ca/data/en/dataset/74738ff5-5367-5958-9aee-98fffdcd1876

The Ecological Land Mass (ELM) classification was established through the 2020 National Interest Land Mass (NILM) Update. ELM lands describe ecological corridors that have inherent natural values and that protect Species at Risk (SAR) and their habitats. The classification identifies lands to protect in perpetuity through planning and partnership efforts. ELM was derived from two separate analyses - the Ontario side from the AECOM natural linkages analysis (2012) and the Quebec side from Del Degan, Masse (DDM) ecological corridors analysis (2012). Adjustments were made as appropriate.

The Air and Watershed Resource Management Contacts and Boundaries dataset is comprised of all the polygons that represent the Air and Watershed Stewardship districts and the manager to contact with questions or concerns about environmental framework implementation and management response. This dataset was created to lend support to the Regulatory Assurance Division.

FCOVER corresponds to the amount of the ground surface that is covered by vegetation, including the understory, when viewed vertically (from nadir). FCOVER is an indicator of the spatial extent of vegetation independent of land cover class. It is a dimensionless quantity that varies from 0 to 1, and as an intrinsic property of the canopy, is not dependent on satellite observation conditions.This product consists of FCOVER indicator during peak-season (June-July-August) at 100m resolution covering Canada's land mass.

Temporal analysis of changes for Victoria, British Columbia, based on GeoAI features automatically extracted from satellite images acquired in the 2000s, 2010s and 2020s. Simple geospatial analysis intersecting Statistics Canada's Open Database of Buildings, version 3 (ODB v3) with GeoAI multidate building features enables the detection of buildings observed in the 2000s, 2010s and 2020s. The addition of new buildings is a good indicator of urban development and/or sprawl. Using the same approach, GeoAI multidate roads enable the detection of Statistics Canada's National Roads Network (NRN) segments present in the 2000s, 2010s and 2020s. The development of new roads is also indicator of urban development and/or sprawl. Complementarily, an analysis of changes in the forest coverage from the GeoAI datasets is done between the 2000s and the 2020s. This analysis reflects the gains and losses between both dates.‌GeoAI enables temporal coverage of various areas in Canada, thus providing a useful tool for change detection and trend analysis at high resolution. While the series is still fairly new, and such examples are limited for the time being, NRCan strives to gradually increase its GeoAI data offering for both spatial and temporal coverage.For more information about the GeoAI - GeoBase Series, please visit the following link: https://open.canada.ca/data/en/dataset/74738ff5-5367-5958-9aee-98fffdcd1876