INW - Inland water resources (inlandWaters)Inland water features, drainage systems, and their characteristics. For example, resources describing rivers and glaciers, salt lakes, water use plans, dams, currents, floods, water quality, and hydrographic charts

Get data about the water quality for Ontario's inland lakes. The data is collected through volunteer monitoring efforts – citizen science. The [Lake Partner environment map](https://www.ontario.ca/page/map-lake-partner) The Lake Partner Program (LPP) measures water quality in inland lakes across Ontario. This dataset provides water quality and water clarity data, as well as data on the concentrations of: * total phosphorus * calcium * chloride * sulphate Spatial information for lake monitoring locations across Ontario are also available. Keywords: Lake, Water, Citizen Science, Community Science, Volunteer, Phosphorus, Calcium, Chloride, Water Clarity

The Maritimes Region is divided into seven Clam Harvesting Areas (CHA).CLAM HARVESTING AREA 1 is described as follows:The inland and tidal waters of the counties of Colchester, Cumberland and Hants that border and flow into the Bay of Fundy.CLAM HARVESTING AREA 2 is described as follows:The inland and tidal waters of the counties of Annapolis, Digby and Kings.CLAM HARVESTING AREA 3 is described as follows:The inland and tidal waters of Yarmouth County.Time restrictions for Clam Harvesting Area 3: No person shall fish for clams from sunset each Saturday until sunrise on the following Monday (closed Sundays) in the boundaries of Clam Harvesting Area 3.CLAM HARVESTING AREA 4 is described as follows:The inland and tidal waters of the counties of Shelburne, Queens and Lunenburg and that portion of Halifax County west of Pennant Point (as defined in the Territorial Sea Geographical Coordinates Order (C.R.C., c. 1550), Schedule I, Area 4).CLAM HARVESTING AREA 5 is described as follows:The inland and tidal waters of Guysborough County and that portion of Halifax County east of Pennant Point (as defined in the Territorial Sea Geographical Coordinates Order (C.R.C., c. 1550), Schedule I, Area 4).CLAM HARVESTING AREA 6 is described as follows:The inland and tidal waters of the counties of Richmond and Cape Breton, all of Victoria County except that portion between Cape North and Inverness County and that portion of Inverness County that borders on the Bras d'Or Lakes.NEW BRUNSWICK - BAY OF FUNDY CLAM HARVESTING AREA 7 is described as follows:The inland and tidal waters of the counties of Charlotte, Saint John and Albert that flow into the Bay of Fundy.

This dataset comprises a map of inland water bodies in Canada and neighboring regions, as described by Ghayourmanesh et al. (2024). The data are mapped using the Lambert Conformal Conic (LCC) geographic projection with a spatial resolution of 250 meters. The LCC projection is frequently used as a standard projection at the Canada Centre for Remote Sensing (CCRS) (Trishchenko et al., 2016, Trishchenko, 2019). Each pixel value represents a code describing either the probability of inland water presence or land/ocean(sea) mask

The locations of coastal ferry routes in British Columbia. This includes ferries in coastal waters like BC Ferries, barges, water taxis, etc. but does not include freshwater ferries on inland rivers or lakes.

This cartographic dataset represents a geomorphological update of the boundaries of the five inland water bodies that form the Magdalen Islands Marine Refuge. It was produced by Fisheries and Oceans Canada (DFO) as part of its marine refuge characterization work.The data used comes from the August 15, 2022 version of the Quebec maritime Geospatial Database of Coastal Ecosystems (GDB), developed from various sources including satellite and airborne images from 2019 (Jobin et al. 2021; Provencher-Nolet et al. 2024). The boundaries of the inland water bodies were defined according to the upper high tide line, which represents the maximum extent of the water during the highest tides.The final product is a polygonal shapefile representing the five inland water bodies of the marine refuge as well as the terrestrial areas of the archipelago. The data are projected in NAD83 / MTM zone 4.For more information on the method used to generate this layer from the GDB, see Grégoire et al. (2026). The method used to create the source geospatial data is described in Jobin et al. (2021) and Provencher-Nolet et al. (2024).

The study involved sampling during a winter subsistence fishery at Brock Lake in November 2003, and a physical, chemical and biological assessment of the lake in July 2004 and July 2005. Data including physical, chemical and biological variables were published as Roux, M.-J., Harwood, L. A., Illasiak, J., Babaluk, J.A., and de Graff, N. 2011. Fishery resources and habitats in a headwater lake of the Brock River, NT, 2003-2005. Can. Manuscr. Rep. Fish. Aquat. Sci. 2932: viii + 61 p.

This dataset uses RADARSAT Constellation Mission (RCM) Synthetic Aperture Radar (SAR) satellite images to identify open water regions within ice-covered rivers during winter, with the aim to assess hydrokinetic resources near remote communities reliant on diesel fuel for electricity generation. The data is processed with the HyRASS, a machine learning-based SAR image processing and classification algorithm.Disclaimer:This dataset was designed to identify open water regions within ice-covered rivers for assessing hydrokinetic resources near remote communities reliant on diesel fuel for electricity generation and is subject to the following limitations: • This dataset was derived from RADARSAT Constellation Mission (RCM) Synthetic Aperture Radar (SAR) satellite images. While these images are generally reliable, they are subject to inherent limitations, including resolution constraints, potential distortion, and occasional inaccuracies in real-time conditions capture. • The HyRASS algorithm is designed to pinpoint open water areas using satellite images, with a particular emphasis on RCM quad polarization (QP) imagery. This specialization means that its effectiveness depends on the accessibility of this specific type of imagery. Consequently, the data it produces might not cover a broad spectrum of time periods. For more reliable results, it's essential to classify areas more regularly, ensuring that detected open water regions are consistent over time.This dataset is intended for preliminary assessment and should not be the sole basis for making critical decisions or investments related to hydrokinetic energy projects. Further validation and in-depth analysis are strongly recommended, and users should conduct their own due diligence and additional research to verify the data accuracy and relevance for specific applications. By accessing and using this dataset, users acknowledge and accept these disclaimers. The providers of this dataset explicitly absolve themselves of any responsibility or liability for any consequences arising from the use, reliance upon, or interpretation of this dataset. Users are advised that their use of the dataset is at their own risk, and they assume full responsibility for any actions or decisions made based on the information contained therein. This disclaimer is in accordance with applicable laws and regulations, and by accessing or utilizing the dataset, users agree to release the providers of this dataset from any legal claims, damages, or liabilities that may arise from such use.

Existing flood protection works (dikes and bank protection) crest alignment in British Columbia. Updated from available Provincial dike crest survey project data from 2019/2020. If 2019/2020 dike survey project data is unavailable, linework based on previous data from 2004 and prior. May include periodic updates depending on data provided by Diking Authorities and other sources. See Data Source under selected linework for details. For more information on dike management and safety, please see: https://www2.gov.bc.ca/gov/content/environment/air-land-water/water/drought-flooding-dikes-dams/integrated-flood-hazard-management/dike-management For contact names regarding regional diking issues, please see: https://www2.gov.bc.ca/assets/gov/environment/air-land-water/water/integrated-flood-hazard-mgmt/dike_safety_program_contact_list.pdf

These datasets include information on Licences under the Water Act collected by Alberta Environment and Protected Areas, for both active and inactive authorizations for surface water and groundwater diversions under a Licence (defined as a “diversion of water” under the Water Act).