This catalog contains annual 30 m spatial resolution snow dynamics metrics for each snow-year from 2018-2019 to 2023-2024 for all of Canada. We gather all Landsat and Sentinel-2 images collected over Canada and identify the status of each pixel observation on the image collection date: snow (and ice), non-snow (i.e., land, water), unclear (i.e., clouds, shadows). We built an algorithm to calculate snow cover metrics for each pixel during each winter: start date of the first (and biggest) snow period [startF, startB], end date of the last (and biggest) snow period [endL, endB], number of days with snow cover in total (or in the biggest snow period) [lengthT, lengthB], number of snow periods (i.e., separated times with multiple confirmed snow observations) [periods], and a status classification (e.g., continuous snow, snow free) [status]. We do not obtain a clear observation every day because of satellite orbit frequencies and clouds. This means that timing-based metrics are identified by the middle date between two clear observations, with uncertainty quantified as half the length of the gap (i.e., ± days) [startF_u, startB_u, endL_u, endB_u, lengthT_u, lengthB_u].

Climate Normals and Averages are used to summarize or describe the average climatic conditions of a particular location. At the completion of each decade, Environment and Climate Change Canada updates its Climate Normals for as many locations and as many climatic characteristics as possible. The Climate Normals, Averages and Extremes offered here are based on Canadian climate stations with at least 15 years of data between 1981 to 2010.

Many geometrical schemes - or map projections - are used to represent the curved surface of the Earth on map sheets. Canada uses the Universal Transverse Mercator (UTM) system. It is called transverse because the strips run north-south rather than east-west along the equator. This data class shows a 1 km x 1 km UTM NAD83 grid that is a standard reference index for Ontario. It includes: * Military Grid Reference * Fire Base Map identifier * Fire Base Map Block * Atlas identifier

Level curves with an equidistance of 1 m derived from a lidar survey conducted in 2024.attributes:ID - Unique IDSubtype - Master (1) or secondary (2) level curve SCORE - Elevation value (m) The High Resolution Digital Elevation Model (m) product The High Resolution Digital Elevation Model (HRDM) product is available on the Open Government website.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

Many geometrical schemes - or map projections - are used to represent the curved surface of the Earth on map sheets. Canada uses the **Universal Transverse Mercator** (UTM) system. It is called transverse because the strips run north-south rather than east-west along the equator.This data class shows a 100 km x 100 km grid coordinate system based on the UTM projection using the North American Datum 83 (NAD83). It includes: * Military Grid Reference * Atlas identifier

Level below which soil or rock is saturated with water, in the well and at the time the level has been measured, expressed in m above the sea level. Groundwater levels measured are interpolated / extrapolated to obtain groundwater level on every cell of the hydrogeological unit raster. Surfer and ArcGis are the software usually used to create groundwater level raster. The dataset designates a raster with a groundwater level, for each cell of the hydrogeological unit.

This is the Grid Section portion of the Oil and Gas Land Division System. This is a grid system consisting of three sections, Area, Section and Unit used to describe Yukon Oil and Gas Dispositions, Leases and Licences. Every Grid Area shall be divided into sections. Grid Areas between 60 degrees and 68 degrees north shall be divided at intervals of 1/8 between the east and west boundaries. Grid Areas between 68 degrees and 70 degrees north shall be divided at intervals of 1/6. The north/south boundaries shall be divided at intervals of 1/10. Each section shall be numbered. Numbering starts with 1 in the southeast corner and moves north along the east edge to 10. The second row is numbered starting in the south again with 11 and goes north to 20. All other rows are number successively in the same manner.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

Statistically downscaled multi-model ensembles of projected change (also known as anomalies) in mean temperature (°C) are available at a 10km spatial resolution for 1951-2100. Statistically downscaled ensembles are based on output from twenty-four Coupled Model Intercomparison Project Phase 5 (CMIP5) global climate models (GCM). Downscaled daily mean temperature was calculated by averaging downscaled daily minimum and maximum temperature. Daily minimum and maximum temperature from GCM outputs were downscaled using the Bias Correction/Constructed Analogues with Quantile mapping version 2 (BCCAQv2). Historical gridded minimum and maximum temperature datasets of Canada (ANUSPLIN) were used as the respective downscaling targets. Projected change in mean temperature (°C) is with respect to the reference period of 1986-2005. Seasonal and annual averages of projected mean temperature change to 1986-2005 are provided. Specifically, the 5th, 25th, 50th, 75th and 95th percentiles of the downscaled ensembles of mean temperature change are available for the historical time period, 1901-2005, and for emission scenarios, RCP2.6, RCP4.5 and RCP8.5, for 2006-2100. Twenty-year average changes in statistically downscaled minimum mean temperature (°C) for four time periods (2021-2040; 2041-2060; 2061-2080; 2081-2100), with respect to the reference period of 1986-2005, for RCP2.6, RCP4.5 and RCP8.5 are also available in a range of formats. The median projected change across the ensemble of downscaled CMIP5 climate models is provided. Note: Projections among climate models can vary because of differences in their underlying representation of earth system processes. Thus, the use of a multi-model ensemble approach has been demonstrated in recent scientific literature to likely provide better projected climate change information.

Many geometrical schemes - or map projections - are used to represent the curved surface of the Earth on map sheets. Canada uses the **Universal Transverse Mercator** (UTM) system. It is called transverse because the strips run north-south rather than east-west along the equator. This data class shows a 5 km x 5 km grid coordinate system based on the UTM projection using the North American Datum 83 (NAD83). It includes a UTM Map Sheet Number.

The High Resolution Digital Elevation Model Mosaic provides a unique and continuous representation of the high resolution elevation data available across the country. The High Resolution Digital Elevation Model (HRDEM) product used is derived from airborne LiDAR data (mainly in the south) and satellite images in the north. The mosaic is available for both the Digital Terrain Model (DTM) and the Digital Surface Model (DSM) from web mapping services. It is part of the CanElevation Series created to support the National Elevation Data Strategy implemented by NRCan. This strategy aims to increase Canada's coverage of high-resolution elevation data and increase the accessibility of the products.Unlike the HRDEM product in the same series, which is distributed by acquisition project without integration between projects, the mosaic is created to provide a single, continuous representation of strategy data. The most recent datasets for a given territory are used to generate the mosaic. This mosaic is disseminated through the Data Cube Platform, implemented by NRCan using geospatial big data management technologies. These technologies enable the rapid and efficient visualization of high-resolution geospatial data and allow for the rapid generation of dynamically derived products. The mosaic is available from Web Map Services (WMS), Web Coverage Services (WCS) and SpatioTemporal Asset Catalog (STAC) collections. Accessible data includes the Digital Terrain Model (DTM), the Digital Surface Model (DSM) and derived products such as shaded relief and slope.The mosaic is referenced to the Canadian Height Reference System 2013 (CGVD2013) which is the reference standard for orthometric heights across Canada.Source data for HRDEM datasets used to create the mosaic is acquired through multiple projects with different partners.Collaboration is a key factor to the success of the National Elevation Strategy. Refer to the “Supporting Document” section to access the list of the different partners including links to their respective data.