Locations of uraniferous boulder-fields and uraniferous swamps extracted from industry assessment reports are useful metallogenetic indicators for uranium exploration within and around the Athabasca Basin. They are used as pathfinders to uranium occurrences and prospects. These locations along the northern rim of the Athabasca Basin in Alberta have been compiled in GIS format and delivered as a point shapefile. In Alberta, the northern rim of the Athabasca Basin and the regolith underlying the Athabasca unconformity are locally exposed along the northern shore of Lake Athabasca. Extensive uranium exploration work in the 1970s, including scintillometer prospecting traverses, geological mapping, airborne and ground geophysics, and drilling, have documented several uraniferous outcrops with scintillometer readings of up to 10 000 counts per second, and uraniferous boulders and boulder trains with radioactivity up to two orders of magnitude higher than the background. Near the Alberta-Saskatchewan border, uraniferous boulders show geochemical characteristics consistent with a Saskatchewan source, whereas to the west boulders have a distinct geochemical signal suggesting a local source in Alberta.

Locations of uraniferous boulders fields and uraniferous swamps extracted from industry assessment reports are useful metallogenetic indicators for uranium exploration within and around the Athabasca Basin. They are used as pathfinders to uranium occurrences and prospects. These locations along the northern rim of the Athabasca Basin in Alberta have been compiled in GIS format and delivered as a polygon shapefile. In Alberta, the northern rim of the Athabasca Basin and the regolith underlying the Athabasca unconformity are locally exposed along the northern shore of Lake Athabasca. Extensive uranium exploration work in the 1970s, including scintillometer prospecting traverses, geological mapping, airborne and ground geophysics, and drilling, have documented several uraniferous outcrops with scintillometer readings of up to 10 000 counts per second, and uraniferous boulders and boulder trains with radioactivity up to two orders of magnitude higher than the background. Near the Alberta-Saskatchewan border, uraniferous boulders show geochemical characteristics consistent with a Saskatchewan source, whereas to the west boulders have a distinct geochemical signal suggesting a local source in Alberta.

This dataset was developed for inclusion in EXTECH IV Athabasca uranium multidisciplinary study project geoscience database.This dataset was developed for inclusion in the EXTECH IV Athabasca uranium multidisciplinary study project geoscience database. It includes the Athabasca Basin paleocurrent directions and was compiled from paper field data sheets. **Please Note – All published Saskatchewan Geological Survey datasets, including those available through the Saskatchewan Mining and Petroleum GeoAtlas, are sourced from the Enterprise GIS Data Warehouse.  They are therefore identical and share the same refresh schedule. 

The Cold Lake Oil Sands area, Twp. 56 to 69, Rge. 1 to 11, W 4th Mer., falls within the Lower Athabasca Regional Plan (LARP). As part of Alberta's Land-use Framework, LARP was developed in 2012 to set the stage for robust growth, vibrant communities and a healthy environment within the region. One of its implementation objectives is to balance the economic development of oil sands and impacts on ecosystem and environment. This is to be achieved through enhanced science-based monitoring for improved characterization of the environment and collection of the information necessary to understand cumulative effects. The anthropogenic footprints shapefile contains a compilation of developed and mixed developed footprint classes extracted from the land-use/land-cover classifications data from 2005 to 2013, published by Alberta Geological Survey. They can be used as a baseline for planning, managing and monitoring surface infrastructure needs and impacts.

This dataset represents Lake Water Geochemical Analyses for the province of Saskatchewan.This dataset represents Lake Water Geochemical Analyses for the province of Saskatchewan. During the intense level of activity directed toward the exploration for uranium in the 1970s, the Saskatchewan Geological Survey and the Geological Survey of Canada funded the collection of several thousand samples of sediments and waters from lakes around the Athabasca Sandstone. All sediment samples were analyzed for U, Cu, Ni, Pb, Zn, Co, Fe and Mn. Selected samples were analyzed for a wide range of additional elements. All lake waters were analyzed for U, F-, and pH, and several hundred samples were analyzed for additional elements and parameters. The Summary Table that precedes this text shows the numbers of samples and elements, and the source of data from which the 8,939 samples listed in the 9 Tables are derived. Over 20 years ago the data in these listings were coded into the Saskatchewan Geological Survey’s ‘Geochemical Data File’, designed in the 1970s (Dunn, 1978b, 1979), and developed by SaskComp (the computer programming department of the Saskatchewan government at that time). The only database listed in the present report that was not in the Geochemical Data File was GSC Open File #779, jointly produced by the SGS and GSC (Coker and Dunn, 1981, 1983) and containing data from detailed surveys of the IAEA/NEA Athabasca Test Area (adjacent to Wollaston Lake). The old Geochemical Data File was state-of-the-art at the time, and data have been available for public scrutiny since inception in 1977. Demonstrations of the File were given at the SGS Open House meetings in 1977 and 1978. The explosive development of personal computers during the past 20 years has made the original Geochemical Data File something of a dinosaur, and the data have been difficult to access and manipulate. The present data file is a compilation that has resulted from detailed evaluation, streamlining, editing and breakdown of the data into simplified Excel files that can easily be manipulated by anyone with a modest knowledge of computers. These data are of historic value and their re-evaluation could assist in current uranium exploration programs. Of particular value is their use in environmental studies, since they represent a 1970s snapshot of the chemistry of the northern Saskatchewan environment prior to mine developments. At the start of sample collection in 1975 Key Lake had not been drained and the only mine site was the pit at Rabbit Lake. This compilation has divided the data into 9 tables, each presented as a shape file. There are 6 shape files of lake sediment data (1LS - 6LS) and 3 shape files of lake water data (4LW - 6LW). Lake water samples were from the same sites as the lake sediments listed in files 4LS - 6LS, hence they have been given the same numeric designation. The data are mostly compatible among the Tables. However, although analytical methods and quality control protocols were similar, they were sufficiently different to warrant treating the data as separate listings. For any regional plotting of data extracted from all Tables these differences should be considered when interpreting distribution patterns. Of particular relevance is that all sediment samples were analyzed for U by neutron activation, with the exception of 158 samples (Table 2LS) where determinations were by fluorometry. These data sets should be fully compatible, because the two techniques provide similar values. Comparison of U data from sediment samples collected and analyzed over four years, then reanalyzed as one batch has shown excellent precision and accuracy (Coker and Dunn, 1981). All U in water determinations were by fluorometry, and all F- by selective ion electrode. Loss on ignition (LOI) data were determined by ignition at 500o C for 4 hours. Table 1LS This data set comprises samples collected by SGS between 1975 and 1978. Samples were digested in aqua regia and all trace elements, except U (see above), were determined by atomic absorption spectrometry (AA).  **Please Note – All published Saskatchewan Geological Survey datasets, including those available through the Saskatchewan Mining and Petroleum GeoAtlas, are sourced from the Enterprise GIS Data Warehouse. They are therefore identical and share the same refresh schedule.

This dataset contains the total annual releases of radionuclides released directly to the environment through direct discharge (i.e. releases to water) from the closed mine sites near Elliot Lake, Ontario, Canada.Note that there is no stack emissions for the Elliot Lake.

The Canadian Nuclear Safety Commission (CNSC) is publishing a database with environmental monitoring results collected as part of the Eastern Athabasca Regional Monitoring Program. The samples are collected near communities located in northern Saskatchewan.

This dataset is the digital compilation of Lake Sediment Analyses was done by the GSC for the Precambrian Shield area of Saskatchewan.This dataset represents the water and sediment geochemistry for select lakes in Saskatchewan. This product was produced by the Geological Survey of Canada as Open file 7746. During the intense level of activity directed toward the exploration for uranium in the 1970s, the Saskatchewan Geological Survey and the Geological Survey of Canada funded the collection of several thousand samples of sediments and waters from lakes around the Athabasca Sandstone. All sediment samples were analyzed for U, Cu, Ni, Pb, Zn, Co, Fe and Mn. Selected samples were analyzed for a wide range of additional elements. All lake waters were analyzed for U, F-, and pH, and several hundred samples were analyzed for additional elements and parameters. The Summary Table that precedes this text shows the numbers of samples and elements, and the source of data from which the 8,939 samples listed in the 9 Tables are derived. Over 20 years ago the data in these listings were coded into the Saskatchewan Geological Survey’s ‘Geochemical Data File’, designed in the 1970s (Dunn, 1978b, 1979), and developed by SaskComp (the computer programming department of the Saskatchewan government at that time). The only database listed in the present report that was not in the Geochemical Data File was GSC Open File #779, jointly produced by the SGS and GSC (Coker and Dunn, 1981, 1983) and containing data from detailed surveys of the IAEA/NEA Athabasca Test Area (adjacent to Wollaston Lake). The old Geochemical Data File was state-of-the-art at the time, and data have been available for public scrutiny since inception in 1977. Demonstrations of the File were given at the SGS Open House meetings in 1977 and 1978. The explosive development of personal computers during the past 20 years has made the original Geochemical Data File something of a dinosaur, and the data have been difficult to access and manipulate. The present data file is a compilation that has resulted from detailed evaluation, streamlining, editing and breakdown of the data into simplified Excel files that can easily be manipulated by anyone with a modest knowledge of computers. These data are of historic value and their re-evaluation could assist in current uranium exploration programs. Of particular value is their use in environmental studies, since they represent a 1970s snapshot of the chemistry of the northern Saskatchewan environment prior to mine developments. At the start of sample collection in 1975 Key Lake had not been drained and the only mine site was the pit at Rabbit Lake. This compilation has divided the data into 9 tables, each presented as a shape file. There are 6 shape files of lake sediment data (1LS - 6LS) and 3 shape files of lake water data (4LW - 6LW). Lake water samples were from the same sites as the lake sediments listed in files 4LS - 6LS, hence they have been given the same numeric designation. The data are mostly compatible among the Tables. However, although analytical methods and quality control protocols were similar, they were sufficiently different to warrant treating the data as separate listings. For any regional plotting of data extracted from all Tables these differences should be considered when interpreting distribution patterns. Of particular relevance is that all sediment samples were analyzed for U by neutron activation, with the exception of 158 samples (Table 2LS) where determinations were by fluorometry. These data sets should be fully compatible, because the two techniques provide similar values. Comparison of U data from sediment samples collected and analyzed over four years, then reanalyzed as one batch has shown excellent precision and accuracy (Coker and Dunn, 1981). All U in water determinations were by fluorometry, and all F- by selective ion electrode. Loss on ignition (LOI) data were determined by ignition at 500o C for 4 hours. Table 1LS This data set comprises samples collected by SGS between 1975 and 1978. Samples were digested in aqua regia and all trace elements, except U (see above), were determined by atomic absorption spectrometry (AA). **Please Note – All published Saskatchewan Geological Survey datasets, including those available through the Saskatchewan Mining and Petroleum GeoAtlas, are sourced from the Enterprise GIS Data Warehouse. They are therefore identical and share the same refresh schedule.

This GIS dataset is part of a digital compilation of the Precambrian geology of the Alberta portion of the Canadian Shield and Athabasca Basin. It is one of the datasets used to produce Alberta Geological Survey (AGS) Map 537. For the Alberta shield, the compilation integrates detailed mapping by both AGS and the Geological Survey of Canada (GSC) at scales ranging between 1:31,680 and 1:250,000. Geochronological data and interpretations also helped prepare this dataset. For the Athabasca Basin, the compilation incorporates the geology of the basin presented in the ExTech IV volume, published in 2007 by the GSC. This dataset tries to present the geological information in a neutral manner, unbiased by the three mutually exclusive, regional tectonic concepts existing at the time of compilation. Users are encouraged to view AGS Map 537, which contains overviews of the geology of the respective areas and a complete reference list. This line feature dataset came from existing, though largely unpublished, digital sources. Areas of the shield are mainly from digitized versions of AGS Maps 180 and 25: the shield north of Lake Athabasca and south of the Athabasca Basin, respectively.

Set of arbitrary location points, usually set at landmarks (definable points on the lake shoreline such as shoreline points, docks, houses etc) to break the lake into identifiable areas to help fish counting crews to identify where they are on the lake