Landsat Thematic Mapper (TM) and Enhanced Thematic Mapper (ETM+) sensors were used to generate the circa 2010 Mosaic of Canada at 30 m spatial resolution. All scenes were processed to Standard Terrain Correction Level 1T by the United States Geological Survey (USGS). Further processing performed by the Canada Centre for Remote Sensing included conversion of sensor measurements to top of atmosphere reflectance, cloud and cloud shadow detection, re-projection, selection of best measurements, mosaic generation ,noise removal and quality control. To provide a clear sky measurement for each location in Canada, data from the years 2009, 2010, and 2011 were used, but 2010 was preferentially selected. Bands 3 (0.63-0.69 µm), 4 (0.76-0.90 µm), 5 (1.55-1.75 µm), and 7 (2.08-2.35 µm) are provided in this version as significant atmosphere effects strongly limit the quality of the blue (0.45-0.52 µm) and green (0.52-0.60 µm) bands. Multi-criteria compositing was used for the selection of the most representative pixel. For ETM+ onboard Landsat 7 a scan line malfunction caused missing lines of data in all scenes collected after May 2003. Atmosphere and target variability between scenes cause these lines to have significant radiometric differences in some cases. A Fourier transformation approach was applied to correct this occurrence. This mosaic was developed for land cover and biophysical mapping applications across Canada. Other applications of these data are also possible, but should consider the temporal and spectral limitations of the product. Research to enhance the spatial, spectral and temporal aspects are in development for future versions of moderate resolution products from historical Landsat sensors, Landsat 8, and Sentinel 2 data.

Land cover information is necessary for a large range of environmental applications related to climate impacts and adaption, emergency response, wildlife habitat, etc. In Canada, a 2008 user survey indicated that the most practical land cover data is provided in a nationwide 30 m spatial resolution format, with an update frequency of five years. In response to this need, the Canada Centre for Remote Sensing (CCRS) has generated a 30 m land cover map of Canada for the base year 2010, as the first of a planned series of maps to be updated every five years, or more frequently. This land cover dataset is also the Canadian contribution to the 30 m spatial resolution 2010 Land Cover Map of North America, which is produced by Mexican, American and Canadian government institutions under a collaboration called the North American Land Change Monitoring System (NALCMS). This land cover dataset for Canada is produced using observation from Thematic Mapper (TM) and Enhanced Thematic Mapper (ETM+) Landsat sensors. An accuracy assessment based on 2811 randomly distributed samples shows that land cover data produced with this new approach has achieved 76.60% accuracy with no marked spatial disparities.- [Land Cover of Canada - Cartographic Product Collection](https://open.canada.ca/data/en/dataset/11990a35-912e-4002-b197-d57dd88836d7)

Landcover dataset created for the northern part of Saskatchewan based on a combination of Landsat 5 Thematic Mapper (TM) and Landsat 7 Enhanced Thematic Mapper (ETM+) data representing circa 2000 conditions.Download: here It is a priority of the Saskatchewan and Canadian government to assess and monitor the health and sustainability of Canada's Forest. The North Digital Land Cover Classification (NDLC) will provide Saskatchewan's contribution to Canada's Earth Observation for Sustainable Development of Forests (EOSD) initiative, helping Canada fulfill it's obligation to the Kyoto Protocol. The NDLC supports the mission and directives of the Saskatchewan provincial government by providing an essential dataset which will enable researchers, natural resource managers and government to assess the health and sustainability of our forests, perform research in the area of climate change, manage natural resources and create policy. The NDLC will be based on a combination of Landsat 5 Thematic Mapper (TM) and Landsat 7 Enhanced Thematic Mapper (ETM+) data representing circa 2000 conditions. The NDLC is being produced through a collaboration of federal, provincial, and territorial governments, agencies and industry. Classification Value Background 0 Agriculture 1 Not Assigned 2 Pasture Upland Herbaceous Graminoid 3 Not Assigned 4 Not Assigned 5 Hardwood Open Canopy 6 Hardwood Closed Canopy 7 Jack Pine Closed Canopy 8 Jack Pine Open Canopy 9 Spruce Closed Canopy 10 Spruce Open Canopy 11 Mixed Hardwoods/Softwoods, Softwood/Hardwood Open and Closed Canopy 12 Treed Rock 13 Recent Burn 14 Revegetating/Regenerating Burn 15 Cutovers 16 Water 17 Marsh 18 Herbaceous Fen 19 Mud Sand Saline 20 Shrub Fen 21 Treed Bog 22 Open Bog 23 Not Assigned 24 Settlements/Roads 25 Barren Land 26 Mixed Softwoods Open and Closed 27 Cloud/Shadow/Haze 28 Unclassified 29 0. Background: Where pixels values are equal to 0 in all channels of satellite image data.  1. Agriculture: Cropland and agricultural clearing areas  2. Not Assigned: Empty Class  3. Pasture Upland Herbaceous Graminoid: Lands containing known pastures, tame or native grasses and herbaceous vegetation. May contain low-lying shrubs with less then 10% tree cover. 4. Not Assigned: Empty Class  5. Not Assigned: Empty Class  6. Hardwood Open Canopy: Trembling Aspen, White Birch, Balsam Poplar composes greater than 75% of species by area, Crown Closure: greater than 10% and less than or equal to 55% (SE crown closure classes A and B).  7. Hardwood Closed Canopy: Trembling Aspen, White Birch, Balsam Poplar composes greater than 75% of species by area, Crown Closure: greater than 55% (SE crown closure classes C and D).  8. Jack Pine Closed Canopy: Jack Pine composes greater than 75% of species by area, Crown Closure: greater than 55% (SE crown closure classes C and D).  9. Jack Pine Open Canopy: Jack Pine composes greater than 75% of species by area, Crown Closure: greater than 10 and less than or equal to 55% (SE crown closure classes C and D).  10. Spruce Closed Canopy: White Spruce, Black Spruce composes greater than 75% of species by area, Crown Closure: greater than 55% (SE crown closure classes C and D).  11. Spruce Open Canopy: White Spruce, Black Spruce composes greater than 75% of species by area, Crown Closure: greater than 10 and less than or equal to 55% (SE crown closure classes C and D).  12. Mixed Hardwoods/Softwoods, Softwood/Hardwood Open and Closed Canopy: An area of hardwood and softwood combinations in which neither hardwood nor softwood account for greater than 75% of species by area and where the crown closure is greater than 10%.  13. Treed Rock: Forest vegetation less than 10%.  14. Recent Burn: An area showing evidence of recent burning natural or prescribed and there is little to no regeneration or revegetation visible.  15. Revegetating/Regenerating Burn: An area showing evidence of natural or prescribed burning and where regeneration or revegetation is visible.  16. Cutovers: An area of deforestation, vegetated and non-vegetated. Ancillary data required to correctly classify due to the anthropogenic land cover/land use class.  17. Water: These areas include lakes, rivers, streams, and reservoirs.  18. Marsh: A periodically wet or continually flooded but non peat-forming area supporting grasses, sedges and reeds.  19. Herbaceous Fen: A wetland area consisting of nutrient rich water and decomposing peat supporting vascular and nonvascular plants grasses, sedges, and reeds.  20. Mud Sand Saline: Water saturated soil, salt water and sand containing no vegetation.  21. Shrub Fen: A wetland area consisting of nutrient rich water and decomposing peat supporting low shrubs, forbs, grass, moss, and a sparse tree cover.  22. Treed Bog: A wetland area consisting of decomposing peat moss, lichen and shrubs with 10% to 25% tree cover of stunted black spruce and tamarack.  23. Open Bog: A wetland area consisting of low nutrient water and decomposing peat moss, lichen, and sparse tree cover.  24. Not Assigned: Empty Class  25. Settlements/Roads: Anthropogenic land cover consisting of urban, commercial, industrial, major roads, highways, surface mines, gravel pits and spoil piles.  26. Barren Land: With the exception of the settlements and Roads class, any area of exposed rock, soil or non-vegetated land.  27. Mixed Softwoods Open and Closed: Jack Pine/Spruce, Spruce/Jack Pine Open and Closed, an area of softwood combinations in which neither Jack Pine or Spruce account for greater than 75% of species by area and where crown closure is greater than 10%.  28. Cloud/Shadow/Haze: An area of cloud, shadow, haze.  29. Unclassified: An area of unidentifiable land cover, indicates no work done/not classified, wrong information, missing data and possible new class greater than 3 pixels. 

Landsat Thematic Mapper (TM) and Enhanced Thematic Mapper (ETM+) sensors were used to generate the circa 2010 Mosaic of Canada at 30 m spatial resolution. All scenes were processed to Standard Terrain Correction Level 1T by the United States Geological Survey (USGS). Further processing performed by the Canada Centre for Remote Sensing included conversion of sensor measurements to top of atmosphere reflectance, cloud and cloud shadow detection, re-projection, selection of best measurements, mosaic generation, noise removal and quality control. To provide a clear sky measurement for each location in Canada, data from the years 2009, 2010, and 2011 were used, but 2010 was preferentially selected. Bands 3 (0.63-0.69 µm), 4 (0.76-0.90 µm), 5 (1.55-1.75 µm), and 7 (2.08-2.35 µm) are provided in this version as significant atmosphere effects strongly limit the quality of the blue (0.45-0.52 µm) and green (0.52-0.60 µm) bands. Multi-criteria compositing was used for the selection of the most representative pixel. For ETM+ onboard Landsat 7 a scan line malfunction caused missing lines of data in all scenes collected after May 2003. Atmosphere and target variability between scenes cause these lines to have significant radiometric differences in some cases. A Fourier transformation approach was applied to correct this occurrence. This mosaic was developed for land cover and biophysical mapping applications across Canada. Other applications of these data are also possible, but should consider the temporal and spectral limitations of the product. Research to enhance the spatial, spectral and temporal aspects are in development for future versions of moderate resolution products from historical Landsat sensors, Landsat 8, and Sentinel 2 data. **This third party metadata element follows the Spatio Temporal Asset Catalog (STAC) specification.**

Landsat Thematic Mapper (TM) and Enhanced Thematic Mapper (ETM+) sensors were used to generate the circa 2010 Mosaic of Canada at 30 m spatial resolution. All scenes were processed to Standard Terrain Correction Level 1T by the United States Geological Survey (USGS). Further processing performed by the Canada Centre for Remote Sensing included conversion of sensor measurements to top of atmosphere reflectance, cloud and cloud shadow detection, re-projection, selection of best measurements, mosaic generation, noise removal and quality control. To provide a clear sky measurement for each location in Canada, data from the years 2009, 2010, and 2011 were used, but 2010 was preferentially selected. Bands 3 (0.63-0.69 µm), 4 (0.76-0.90 µm), 5 (1.55-1.75 µm), and 7 (2.08-2.35 µm) are provided in this version as significant atmosphere effects strongly limit the quality of the blue (0.45-0.52 µm) and green (0.52-0.60 µm) bands. Multi-criteria compositing was used for the selection of the most representative pixel. For ETM+ onboard Landsat 7 a scan line malfunction caused missing lines of data in all scenes collected after May 2003. Atmosphere and target variability between scenes cause these lines to have significant radiometric differences in some cases. A Fourier transformation approach was applied to correct this occurrence. This mosaic was developed for land cover and biophysical mapping applications across Canada. Other applications of these data are also possible, but should consider the temporal and spectral limitations of the product. Research to enhance the spatial, spectral and temporal aspects are in development for future versions of moderate resolution products from historical Landsat sensors, Landsat 8, and Sentinel 2 data. **This third party metadata element follows the Spatio Temporal Asset Catalog (STAC) specification.**

This data was produced in 1999 by rationalizing a 48-class database into 28 distinct classes. The original database was derived from digital, multispectral Landsat Thematic Mapper data recorded between 1986 and 1997, with most of the satellite data frames recorded in the early 1990s. The resulting database includes: * vegetation types such as forests, wetlands and pasture * categories of non-vegetated surface such as waterbodies, bedrock or settlements The data reflects the nature of the land surface rather than the land use.

Polygons containing the date of capture of the Landsat images used to create the first version of the Baseline Thematic Mapping v1 (BTM1). This spatial view is only meaningful in conjunction with the satellite images or the BTM data derived from the satellite images. The images were captured from 1990 to 1997

BTM ( Baseline Thematic Mapping) Landsat Image Catalogue Acquisition Dates. This polygon coverage contains the date of capture of the Landsat images making up the seamless BC Landsat image catalogue. This is not a multipart feature

The land cover classes consist of vegetation types (such as forest, wetlands and agricultural crops or pasture) and categories of non-vegetated surface (such as water bodies, bedrock outcrops or settlements). These classes reflect the nature of the land surface rather than actual or potential land use. The 2000 Edition of the Ontario Land Cover Data Base is the Second Edition of this provincial land cover classification. The coverage is derived wholly from Landsat-7 Thematic Mapper (TM) satellite data frames recorded between 1999 and 2002, most from 2000 onward. The Provincial Land Cover (2000) Data Base is divided into 4 individual Universal Transverse Mercator (UTM) grid zone tiles (15, 16, 17, and 18) and is distributed in Tagged Image File Format (TIFF) format. Documentation is provided with this database in the form of a user's guide and general use caveats.

The “Land Cover for Agricultural Regions of Canada (circa 2000), Date Index” dataset is a geospatial data layer containing polygon features representing the Landsat scene number, associated dates and other products that were incorporated into the thematic land cover classification which is contained within the AAFC Landcover (circa 2000) product.