The data represents the relative cultivation intensity in the agricultural area of Alberta. Cultivation intensity refers to the frequency of cultivation associated with the following management systems: no till, conventional tillage and summerfallow. It is an estimate of the degree to which cultivation contributes to wind and water erosion. The classes shown on the map are ranked between 0 (lowest) and 1 (highest).This map was created in 2002 using ArcGIS.

A Yukon-wide compilation of 1102 till geochemistry samples collected during 4 regional till sampling surveys conducted by Yukon Geological Survey in the Faro/Anvil Range, Weasel Lake, Finlayson Lake and Glenlyon/East Carmacks areas between 1998 and 2002. Complete analytical results for more than 40 elements are included in the attribute table for each sample.

To support improved groundwater geoscience knowledge for southern Ontario, a regional 3-D model of the surficial geology of southern Ontario has been developed as a part of a collaboration between the Ontario Geological Survey and the Geological Survey of Canada. Covering approximately 66,870 km2 in area, the model is a synthesis of existing geological models, surficial geology mapping, and subsurface data. The model is a simplified 9-layer reclassification of numerous mapped local surficial sediment formations in places over 200 m thick with a total volume of approximately 2,455 km3. The model integrates 1:50,000 scale surficial geology mapping with 90 m bathymetrically corrected topographic digital elevation model (DEM) and 8 existing local 3-D models. Archival subsurface data include 10,237 geotechnical and stratigraphic boreholes, 3,312 picks from geophysical surveys, 15,902 field mapping sites and sections, 537 monitoring and water supply wells and 282,995 water well records. Roughly corresponding to regional aquifer and aquitard layers, primary model layers are (from oldest to youngest): Bedrock, Basal Aquifer, Lower Sediment, Regional Till, Post Regional Till Channel Fill, Glaciofluvial Sediment, Post Regional Till Mud, Glaciolacustrine Sand and Recent Sediment / Organics. Modelling was completed using an implicit modelling application (LeapFrog®) complemented by an expert knowledge approach to data classification and rules-based Expert System procedure for data interpretation and validation. An iterative cycle of automated data coding, intermediate model construction and manual data corrections, expert evaluations, and revisions lead to the final 3-D model. A semi-quantitative confidence assessment has been made for each model layer surface based on data quality, distribution and density. This surficial geology model completes the development of a series of regional 3-D geological and hydrogeological models for southern Ontario.

This dataset compiles information and photographs collected at 49 observation stations during a field campaign conducted from July 31 to August 11, 2025, in the central part of the Kivalliq region. It includes the locations of sites where ice-flow indicators were measured, along with their relative chronology where it could be determined in the field.It also includes the locations of till sampling sites collected for geochemical and indicator mineral analyses, as well as sites where boulders and bedrock surfaces were sampled for terrestrial cosmogenic isotope dating.Analytical results and interpretations will be presented in subsequent publications.

This layer contains point features that represent New Brunswick Geological Survey till sample locations where laboratory grain size analysis was completed. Grain size data are contained in the attribute data for each location.Grain size analysis is limited to the dry-sieved <2 mm fraction of collected till samples. This fraction of the till sediment is subjected to hydrometer grain size analysis to determine the percentages of sand, silt, and clay. The process is based on the hydrometer method of Bouyoucous 1962.Sand: 63 µm to 2 mmSilt: 2µm to 63 µmClay: < 2 µmBouyoucous, G.H. (1962) Hydrometer Method Improved for Making Particle Size Analysis of Soils. Agronomy Journal, 54, 464-465

This layer contains point features that represent New Brunswick Geological Survey till sample locations where laboratory grain size analysis was completed. Grain size data are contained in the attribute data for each location.Grain size analysis is limited to the dry-sieved <2 mm fraction of collected till samples. This fraction of the till sediment is subjected to hydrometer grain size analysis to determine the percentages of sand, silt, and clay. The process is based on the hydrometer method of Bouyoucous 1962.Sand: 63 µm to 2 mmSilt: 2µm to 63 µmClay: < 2 µmBouyoucous, G.H. (1962) Hydrometer Method Improved for Making Particle Size Analysis of Soils. Agronomy Journal, 54, 464-465

Yukon Biophysical Plot locations are derived from the Yukon Biophysical Information System (YBIS) database, which is the Government of Yukon's repository for storing biophysical data . Data contain a combination of site, soil and vegetation information which are collected by multiple agencies to support vegetation inventory, habitat assessment and baseline ecosystem products collected from 1975 - 2018. Data are collected and input into the database using standardized biophysical field forms as per the "Field Manual for Describing Yukon Ecosystems" data collection standards. Data contributors include Government of Yukon, Government of Canada, First Nations Governments, private contractors, academia and the public. Location accuracy of plot data may vary based on the project year and location collection method. YBIS is an active database, which is subject to periodic updates and revisions. Because of this, the onus is on the end-user to ensure that they are using the most current version of the data. Although every effort has been made to ensure the correctness of the data, there still may be errors. Please report errors in the data to the Custodian.Contact Information:Ecological and Landscape Classification (ELC) Coordinator, elc@yukon.ca Ecological and Landscape Classification Program, Fish and Wildlife Branch, Department of Environment Government of Yukon, Box 2703, Whitehorse, Yukon Y1A 2C6 ph. (867) 667-3081Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

The Service BC Office Locations is comprised of all Service BC locations in the province. These offices provide front line support for many of the hundreds of programs and services the provincial government offers to residents, businesses and visitors.

This dataset shows the location of Lithoprobe Trans Hudson Orogen seismic data acquisition points for the Province of Saskatchewan.This dataset shows the locations of LITHOPROBE Trans Hudson Orogen seismic data acquisition points for the Province of Saskatchewan. The data was created as a file geodatabase feature class and output for public distribution.  **Please Note – All published Saskatchewan Geological Survey datasets, including those available through the Saskatchewan Mining and Petroleum GeoAtlas, are sourced from the Enterprise GIS Data Warehouse. They are therefore identical and share the same refresh schedule.

This dataset shows the surficial geology points for the Province of Saskatchewan and is designed for the Resource Map of Saskatchewan. This dataset shows the surficial geology points for the Province of Saskatchewan and is designed for the Resource Map of Saskatchewan. Mapping in support of the dataset includes years of field observations which were then compiled and integrated into this dataset. The data was created as a file geodatabase feature class and output for public distribution. 1:1,000,000 scale surficial geology points map of Saskatchewan symbol layer.  **Please Note – All published Saskatchewan Geological Survey datasets, including those available through the Saskatchewan Mining and Petroleum GeoAtlas, are sourced from the Enterprise GIS Data Warehouse. They are therefore identical and share the same refresh schedule.