A chlorophyll fluorescence time series was collected at various locations around the coast of Vancouver Island, British Columbia, Canada for monitoring phytoplankton concentrations. A Wetlabs ECO fluorometer was deployed every few months on a schedule depending on season and sensor availability. The instrument hung by a chain attached to the side of the buoy, or dock, depending on location, and measured chlorophyll using the fluorescence emission at 695nm. The instrument also measured turbidity by detecting the scattered light at 700nm. The units had internal batteries and data storage and were programmed to make a group of 5 measurements every 30 minutes. A copper wiper covered the sampling window between groups of measurements to reduce fouling. Times are in UTC unless otherwise stated.

Bivalve aquaculture has direct and indirect effects on plankton communities, which are highly sensitive to short-term (seasonal, interannual) and long-term climate changes, although how these dynamics alter aquaculture ecosystem interactions is poorly understood. Here, we investigate seasonal patterns in plankton abundance and community structure spanning several size fractions from 0.2 µm up to 5 mm, in a deep aquaculture embayment in northeast Newfoundland, Canada. Using flow cytometry and FlowCam imaging, we observed a clear seasonal relationship between fraction sizes driven by water column stratification (freshwater input, nutrient availability, light availability, water temperature). Plankton abundance decreased proportionally with increasing size fraction, aligning with size spectra theory. Within the bay, greater mesozooplankton abundance, and a greater relative abundance of copepods, was observed closest to the aquaculture lease. No significant spatial effect was observed for phytoplankton composition. While the months of August to October showed statistically similar plankton composition and size spectra slopes (i.e., food chain efficiency) and could be used for interannual variability comparisons of plankton composition, sampling for longer periods could capture long-term phenological shifts in plankton abundance and composition related to various processes, including climate change. Conclusions provide guidance on optimal sampling to monitor and assess aquaculture pathways of effects.Cite this data as: Sharpe H, Lacoursière-Roussel A, Gallardi D (2024). Ecological insight of seasonal plankton succession to monitor shellfish aquaculture ecosystem interactions. Version 3.2. Fisheries and Oceans Canada. Sampling event dataset. https://doi.org/10.25607/2ujdvh

These products are derived from RGB (red/green/blue) images, a satellite processing technique that uses a combination of satellite sensor bands (also called channels) and applies a red/green/blue (RGB) filter to each of them. The result is a false-color image, i.e. an image that does not correspond to what the human eye would see, but offers high contrast between different cloud types and surface features. The on-board sensor of a weather satellite obtains two basic types of information: visible light data (reflected light) reflecting off clouds and different surface types, also known as "reflectance", and infrared data (emitted radiation) which are short-wave and long-wave radiation emitted by clouds and surface features. RGBs are specially designed to combine this type of satellite data, resulting in an information-rich final product.Other products are based on the enhancement of channel data for a single wavelength, also aimed at highlighting meteorological features of the observed surface or clouds, but in a simpler way since only a single wavelength is involved. This older approach is still useful today, as its simplicity makes image interpretation easier in some cases.

These products are derived from RGB (red/green/blue) images, a satellite processing technique that uses a combination of satellite sensor bands (also called channels) and applies a red/green/blue (RGB) filter to each of them. The result is a false-color image, i.e. an image that does not correspond to what the human eye would see, but offers high contrast between different cloud types and surface features. The on-board sensor of a weather satellite obtains two basic types of information: visible light data (reflected light) reflecting off clouds and different surface types, also known as "reflectance", and infrared data (emitted radiation) which are long-wave radiations emitted by clouds and surface features. RGBs are specially designed to combine this type of satellite data, resulting in an information-rich final product. Four types of products are currently generated from the GOES-West and GOES-East satellites: "NightIR" and "NightMicrophysics", at 2km resolution, are generated 24 hours a day with infrared channels, so are visible both night and day, and "NaturalColour" and "DayCloudConvection", at 1km resolution, which combine visible light channels with infrared channels; their higher resolution makes the latter two products more popular, but they are not available during most of the night (between 02UTC and 07UTC for GOES-Est, and between 06UTC and 11UTC for GOES-Ouest) given the absence of reflected sunlight. Other RGB products should be added gradually in the future to meet different needs.

The Culture Point dataset is comprised of all the points that represent Hamlets, Localities and Townsites in Alberta. The formation of a Hamlet can occur if there are 5 or more buildings used as dwellings with a majority of which are on parcels of land smaller than 1850 square metres, has a generally accepted boundary and name and contains parcels of land that are used for non-residential purposes. Hamlet is an unincorporated community that can be designated by the council of Municipal District or Specialized Municipality within their boundaries, or by the Minister of Municipal Affairs within the boundaries of an Improvement District. Locality is an unincorporated place or an area with scattered population. Townsite is a federally administered village. The boundaries of rural classification of Locality and Townsite are often undefined.

Get consolidated soil data mapped on a county basis in a digitally stitched and standardized product. This soil survey data was mapped by a number of soil surveyors from the 1920s to the 1990s. The product incorporates soil information from a variety of map scales. The project has brought the individual county or regional municipality surveys together to reveal inconsistencies in soil data across county boundaries. The soil complex database contains other descriptive information including: * slope class * Canada Land Inventory (CLI) ranking * stoniness * drainage class * texture

Total soil moisture is the modelled amount of plant available water (mm) in the root zone of the soil. The value given is the amount calculated to be present on the modeled day of the product.Values are computed using the Versatile Soil Moisture Budget (VSMB)

This dataset contains the outputs for Bute Inlet from two simulations shown in the publication "Fjord circulation permits persistent subsurface water mass in a long, deep mid-latitude inlet" by Laura Bianucci et al., DFO Ocean Sciences Division, Pacific Region (published in the journal Ocean Science in 2024). The Finite Volume Community Ocean Model (FVCOM v4.1) was run with two different sets of initial conditions for the Discovery Islands region of British Columbia, Canada, from May 24 to June 27, 2019. The "Baseline" simulation used observed initial conditions, while the "Sensitivity" simulation removed the observed cold subsurface water mass from the initial profiles. Here in this dataset, we provide 29-day averages of the following variables in a transect along Bute Inlet: potential temperature, density, along-inlet velocity, and Brunt-Väisälä frequency (N^2). The averaging properly removes the tidal effects.

This inventory, conducted from September 26th to October 3th, 2019, aimed to describe the community structure of macroalgae and benthic macroinvertebrates of five small estuaries of the Upper North Shore of Quebec, namely Barthélemy Bay and the Colombier, Mistassini, Franquelin and Saint-Nicolas rivers. This inventory is part of a doctoral study of Valentine Loiseau on the global changes in the St. Lawrence system, mainly the study of marine benthic communities in response to changes of salinity, to ensure proper management of the environment in the face of future changes. The main objective is to describe the structure and the levels of specific diversities of mediolittoral communities of benthic macroinvertebrates and macroalgae along a salinity gradient. These five small estuaries were selected because of their similar size, hard substrates and easy access. Three levels of hypoosmotic stress (low, medium, high) and one control level (seawater) were used for each of the selected estuaries, with eight quadrats per stress level. Quadrat positions were randomly selected but had to meet two criteria: (1) regular height in the foreshore to control the influence of other stresses (temperature, exposure); and (2) presence of at least one macroalga to maintain homogeneity. A percentage cover by macroalgal and macroinvertebrate species was estimated, and then all organisms were weighed by species and size group. The salinity of the nearest water point was measured at mid-tide with a portable refractometer and a Castaway-type CTD (Conductivity-Temperature-Density) probe. The inventory was done using a stratified random sampling design and the sampling unit was a quadrat measuring 25 x 25 cm. The three files provided (DarwinCore format) are complementary and are linked by the "eventID" key. The "event_information" file includes the generic information of the quadrat, including date and location. The "additional_information_event_and_occurrence" file includes salinity and substrate type of the quadrat, as well as the total weight of all individuals of the same species caught in the quadrat extrapolated to one square metre of surface. For nudibranchs and barnacles, weight was estimated from the size of the individuals so that they were not removed from the environment. The "taxon_occurrence" file includes the taxonomic inventory of macroalgal and benthic macroinvertebrate species observed in the quadrat, identified to the lowest possible species or taxonomic level and biomass by identified species.For quality control, organisms were identified on the field using the following guide: Chabot, Robert et Anne Rossignol. 2003. Algues et faune du littoral du Saint-Laurent maritime : Guide d'identification. Institut des Sciences de la mer de Rimouski, Rimouski ; Pêches et Océans Canada (Institut Maurice-Lamontagne), Mont-Joli. 113 pages. The taxonomy was checked against the World Register of Marine Species (WoRMS) to match recognized standards and using the R obistools and worrms libraries. The WoRMS match was placed in the "scientificNameID" field of the occurrence file. All sample locations were spatially validated. This project was funded by DFO Coastal Environmental Baseline Program under Canada’s Oceans Protection Plan. This initiative aims to acquire environmental baseline data contributing to the characterization of important coastal areas and to support evidence-based assessments and management decisions for preserving marine ecosystems.

Accumulated Precipitation represents the amount of total precipitation in mm (solid and/or liquid) which has been recorded over a given period of time. Products are produced for the following timeframes: Agricultural Year, Growing Season, Winter Season, as well as rolling products for 7, 14, 30, 60, 90, 180, 270, 365, 730, 1095, 1460 and 1825 days.