Layer that includes the known information on the atlantic sturgeon breeding, feeding and concentration areas in the St. Lawrence River and Estuary according to a literature review of documents produced between 1993 and 2003.Additional InformationAtlantic sturgeon's breeding, feeding and concentration areas were produced according to a literature review of the following documents:Communication personnelle par Hatin. D. 2003.Gagnon, M., Y. Ménard et J.-F. La Rue. 1993. Caractérisation et évaluation des habitats du poisson dans la zone de transition saline du Saint-Laurent. Rapp. tech. can. sci. halieut. aquat. 1920: viii + 104 p.Hatin. D., F. Caron et R. Fortin. 1999. Rapport d'opération : Déplacement et caractérisation du stock reproducteur d'esturgeon noir (Acipenser oxyrinchus) dans l'estuaire du fleuve Saint-Laurent. Faune et Parcs Québec, Direction de la faune et des habitats. 91 p.Hatin, D. et F. Caron. 2002. Déplacement et caractéristiques des esturgeons noirs (Acipencer oxyrinchus) adultes dans l'estuaire du fleuve Saint-Laurent en 1998 et 1999. Société de la Faune et des Parcs du Québec, Direction de la recherche sur la faune. 151 p.Naturam Environnement. 1995. Les possibilités de fraie de l'esturgeon noir dans l'estuaire de la rivière Manicouagan. Rapport présenté au Comité ZIP et à la Corporation d'amélioration et de protection de l'environnement (CAPE). Dossier 95-869. 75 p. Therrien, J. 1998. Rapport sur la situation de l'esturgeon noir (Acipenser oxyrinchus) au Québec. Ministère de l'Environnement et de la Faune, Direction de la faune et des habitats, Service de la faune aquatique. 45 p. Société de la Faune et des Parcs du Québec. 2000. Atlas des habitats critiques connus ou d'intérêt particulier pour les poissons du fleuve Saint-Laurent entre le port de Montréal et l'Île aux Coudres. Direction du développement de la faune.Trencia, G. Communication personnelle.

The Fire Control Zone dataset is comprised of all the polygons that represent Fire Control Zones in Alberta. Fire Control Zone is legislated to show geographical areas established for the purposes of closure orders and fire control orders under the Alberta Forest and Prairie Protection Act.

This dataset shows the locations of ignition points for forest fires less than 40 hectares in size. Fires that grow larger than 40 hectares are mapped in the [Fire Disturbance Area](https://data.ontario.ca/dataset/fire-disturbance-area-firedstb) dataset. The [Forest Fire Info Map](https://www.gisapplication.lrc.gov.on.ca/ForestFireInformationMap/index.html?viewer=FFIM.FFIM&locale=en-US) shows active fires, current fire danger and restricted fire zones in place due to high fire danger.

Map of burned area in Canada's forested ecosystems for the 2023 fire session at 30-m spatial resolution mapped from time-series data from Sentinel-2A and -2B, and Landsat-8 and -9 using the Tracking Intra- and Inter-year Change (TIIC) algorithm (Pelletier et al. 2024). It is developed within the framework of Canada’s National Terrestrial Ecosystem Monitoring System (NTEMS). Fires are grouped into two classes based on detection period: summer fires and fall fires. Summer burned pixels were detected between May 30 and September 17, and fall burned pixels were detected between September 17 and October 25. For summer fires, burned pixels were identified by TIIC as changed and typed as fire. For the fall period, TIIC only detected changes within a 4-km buffer of the NRCan fire perimeters (https://cwfis.cfs.nrcan.gc.ca/datamart). This approach was used to limit commission errors that can occur due to known limitations of mapping with optical data in the fall due to phenology, snow cover, or low sun angles. For the 2023 fire season, the TIIC algorithm detected 12.74 Mha of burned area in Canada's forested ecozones, representing 1.8% of the total forest-dominated ecozone area. Of the 12.74 Mha, 11.57 Mha (90.9%) was burned by summer fires and 1.16 Mha (9.1%) by fall fires (Pelletier et al, 2024).When using this data, please cite as: Pelletier, F., Cardille, J.A., Wulder, M.A., White, J.C., Hermosilla, T., 2024. Revisiting the 2023 wildfire season in Canada. Science of Remote Sensing. 10, 100145. (Pelletier et al. 2024).

A Fire Disturbance Area represents the mapped exterior perimeter of a forest fire. Mapping is derived from a variety of sources, such as GPS points and digitized paper maps. Prior to 1998, only fires greater than 200 hectares were mapped. Since 1998, fires greater than 40 hectares have been mapped. If adequate mapping exists for fires less than 40 hectares in size, they will be included in this data class. The [Forest Fire Info Map](https://www.lioapplications.lrc.gov.on.ca/ForestFireInformationMap/index.html?viewer=FFIM.FFIM) shows active fires, current fire danger and restricted fire zones in place due to high fire danger.

This dataset shows the boundaries of the province's six fire management zones that existed prior to 2014 in which most forest fires received the same type of response. These management zones were based on: * common forest and forest fire management objectives * land use * density of values at risk * fire load * forest ecology The 2014 Wildland Fire Management Strategy moved from a zone-based approach to one where each wildland fire is assessed and receives an appropriate response according to the circumstances and condition of the fire.

Fire perimeters for this year's forest fires in Ontario. Fire perimeters are illustrations only and may not be exact in relation to actual physical locations. The Ontario Ministry of Natural Resources does not capture perimeters for every fire. Fire perimeters are not captured in real time; each capture depends on available resources and weather conditions and may be several days old. During fire season, perimeter data is updated every 24 hours as improved information becomes available; therefore, reported fire size may fluctuate from day to day. The Ontario Ministry of Natural Resources shall not be liable in any way for the use of, or reliance upon this information. The [Forest Fire Info Map](https://www.lioapplications.lrc.gov.on.ca/ForestFireInformationMap/index.html?viewer=FFIM.FFIM&locale=en-CA) shows active fires, current fire danger and restricted fire zones in place due to high fire danger.

This is point GIS coverage consisting of either fire ignition locations or centroids of fire polygons where the exact location of fire ignition were unknown for fires within the Yukon, spanning a period from 1946 to present. Although the temporal scale of the coverage goes back to late 1940's, Yukon-wide fire detection capability was not fully developed until the 1960's. In addition to this, access to regular aerial mapping was not readily available until that same time period. As a result many fires in the 40's and 50's were simply not recorded or poorly mapped, particularly in the north. For that reason, care must be taken when drawing conclusions from these data as it relates to the early years. Starting 2020 on the data was automatically updated using iFMS.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

Wildfire historic incident point locations for all fire seasons before the current season. Supplied through various sources. Not to be used for legal purposes. This data includes all incidents tracked by BC Wildfire Service, ie. actual fires, suspected fires, nusiance fires, smoke chases, etc. On April 1 of each year this layer is updated with the previous fire season's data

This layer is the current fire year burn severity classification for large fires (greater than 100 ha). Burn severity mapping is conducted using best available pre- and post-fire satellite multispectral imagery acquired by the MultiSpectral Instrument (MSI) aboard the Sentinel-2 satellite or the Operational Land Imager (OLI) sensor aboard the Landsat-8 and 9 satellites. Every attempt is made to use cloud, smoke, shadow and snow-free imagery that was acquired prior to September 30th. However, in late fire seasons imagery acquired after September 30th may be used. This layer is considered an interim product for the 1-year-later burn severity dataset (WHSE_FOREST_VEGETATION.VEG_BURN_SEVERITY_SP). Mapping conducted during the following growing season benefits from greater post-fire image availability and is expected to be more representative of tree mortality. #### Methodology: • Select suitable pre- and post-fire imagery or create a cloud/snow/smoke-free composite from multiple images scenes • Calculate normalized burn severity ratio (NBR) for pre- and post-fire images • Calculate difference NBR (dNBR) where dNBR = pre NBR – post NBR • Apply a scaling equation (dNBR_scaled = dNBR*1000 + 275)/5) • Apply BARC thresholds (76, 110, 187) to create a 4-class image (unburned, low severity, medium severity, and high severity) • Mask out water bodies using a satellite-derived water layer • Apply region-based filters to reduce noise • Confirm burn severity analysis results through visual quality control • Produce a vector dataset and apply Euclidian distance smoothing