Bay and Channel (fresh and marine) features and associated names

To ensure informed decision-making, management, and conservation of marine ecosystems along the British Columbia (BC) coastline, a comprehensive understanding of marine communities and habitats is necessary. Marine planning initiatives, including environmental incident response planning and the development of a marine protected area network, have long been challenged by significant gaps in our knowledge of the distribution of many nearshore marine species. This lack of critical information can impede our ability to effectively manage and protect vulnerable species and ecosystems.   We developed a set of species distribution models (single-SDMs) using data collected from the benthic habitat mapping survey. These models correlate species occurrence data with environmental variables. We used these models to make predictions of the probability of occurrence of each species across the entire BC coast. A cluster analysis of the single-SDM predictions was then used to determine biotopes, which are distinct combinations of physical and chemical water properties and associated biological communities.   We defined and mapped the spatial distribution and probability of nine nearshore macrofauna epibenthic biotopes along with three physiotopes based on environmental conditions. The definition of the biotopes includes correlated species, the type of substrate, and range of environmental conditions (slope, depth, current, temperature, salinity, and tidal current) occurring within each biotope. The biotopes defined here are a first, but important, step in quantitative bioregionalization for the Pacific region as the resolution of nearshore marine community information has been lacking in BC and has hindered marine spatial initiatives.  This dataset contains 71 of the 72 single-SDMs (which excludes Northern abalone, an endangered species), the spatial distribution of 9 biotopes and 3 physiotopes, and the species richness calculated as the sum of occurrence probabilities across all 72 species.

PURPOSE:From August 2nd to September 9th, 2013, Fisheries and Oceans Canada conducted a baseline survey of marine fishes and their habitats in the southern Canadian Beaufort Sea and Amundsen Gulf as part of the Beaufort Regional Environmental Assessment (BREA) called the Beaufort Sea Marine Fishes Project (BSMFP). Sampling was conducted from the F/V Frosti at 53 stations along 8 transects. Standardized sampling was conducted using benthic trawling nets. The BSMFP is the first research project to use a large research trawls to assess the biodiversity and abundance of offshore marine fishes in this area. In total, 48 species of fish were caught, one of which was a new occurrence in the Canadian Beaufort Sea, Lycodes lavalaei. DESCRIPTION:Basic biological data for all fish caught during the 2013 BSMFP expedition. Includes identification, weight, length (total, fork, and, standard), liver weight, gonad weight, sex and maturity level. PARAMETERS COLLECTED:familyspeciesweighttotal lengthfork lengthstandard lengthliver weightgonad weightsexmaturitySAMPLING METHODS:Various trawl types.

PURPOSE:From August 1st to September 11th, 2014, Fisheries and Oceans Canada conducted a baseline survey of marine fishes and their habitats in the southern Canadian Beaufort Sea and Amundsen Gulf as part of the Beaufort Regional Environmental Assessment (BREA) called the Beaufort Sea Marine Fishes Project (BSMFP). Sampling was conducted from the F/V Frosti at 54 stations along 14 transects. Standardized sampling was conducted at pre-determined depth stations (20-1500 m) using benthic trawling nets. The BSMFP is the first research project to use large research trawls to assess the biodiversity and abundance of offshore marine fishes in this area. In total, 42 species of fish were caught. This report contains information on fishing net deployments, catch per unit effort (CPUE), and basic biological data for all fishes caught.DESCRIPTION:Basic biological data for all fish caught during the 2014 BSMFP expedition. Includes identification, weight, length (total, fork, and, standard), liver weight, gonad weight, sex and maturity level. PARAMETERS COLLECTED:familyspeciesweighttotal lengthfork lengthstandard lengthliver weightgonad weightsexmaturitySAMPLING METHODS:Various trawl types.

GIS compilation of data used to perform the stacked cumulative chance of success (resource potential map) in Open file 9163. Natural Resources Canada (NRCan) has been tasked, under the Marine Conservation Targets (MCT) initiative announced in Budget 2016, with evaluating the petroleum resource potential for areas identified for possible protection as part of the Government of Canada's commitment to conserve 10% of its marine areas by 2020. As part of this initiative, NRCan's Geological Survey of Canada (GSC) conducted a broad regional study of the petroleum potential over the majority of the Magdalen Basin, which is the principal geological basin in the southern Gulf of St. Lawrence. The GSC resource assessment is visually represented by a qualitative petroleum potential map. Disclaimer: A simplified colored version of the map is displayed on the Web Mapping Service (WMS). The correct version is available for download through the Federal Geospatial Platform (FGP) and GEOSCAN.

PURPOSE:The Department of Fisheries and Oceans (DFO) conducted a baseline survey of biological communities and habitat parameters in the offshore Canadian Beaufort Sea between 2012 and 2014, as part of the federally administered Beaufort Regional Environmental Assessment. The BREA-Marine Fishes Project (BREA-MFP) was the first comprehensive baseline study of offshore marine fish diversity and associated habitats in the Canadian Beaufort Sea. Knowledge gained during the BREA-MFP supports regulatory processes pertaining to offshore development and Oceans Management in the Inuvialuit Settlement Region, and provides baseline context for studies of the effects of climate change and variability. The Canadian Beaufort Sea – Marine Ecosystem Assessment (CBS-MEA, 2017-2019 and 2021-2024) is building on system baselines and ecological knowledge derived from the BREA-MFP to develop a comprehensive research and monitoring approach for the offshore Canadian Beaufort Sea. This approach will enable us to better understand the relationship between oceanographic drivers and ecosystem responses. The CBS-MEA focuses on integrating oceanography, food web linkages, physical-biological couplings and spatial and inter-annual variabilities, while also expanding baseline coverage of species diversity, abundances, and habitat associations to areas of the Beaufort Sea and Canadian Archipelago that are previously unstudied in this context.DESCRIPTION:Between 2017 and 2019, and between 2021 and 2024, Fisheries and Oceans Canada conducted a baseline survey of marine fishes and their habitats on the Canadian Beaufort Shelf and slope in August and early September each year. Sampling was conducted from the F/V Frosti at over 150 stations along ten multi-year transects, and over 50 non-transect stations. Standardized sampling was conducted at pre-determined depth stations (20-40, 75, 200, 350, 500, 750, and 1000 m) using a variety of sampling equipment including benthic fishing trawls, plankton nets, sediment cores, and CTD and water sample profiles. Presented here is the information on the sampling locations, and the sampling gear deployed at each station.

The Coastal Environmental Baseline Program is a multi-year Fisheries and Oceans Canada initiative designed to work with Indigenous and local communities and other key parties to collect coastal environmental data at a series of sites across Canada, to build a better understanding of existing marine ecological conditions. The program began data collection in 2019, and with the onset of Phase 2 in 2023, the Maritimes region study area was expanded and renamed ‘Northwest Fundy Shores’. A physical oceanography program was designed to align with the oceanographic interests and data needs of local interest holders. Starting in 2023, oceanographic parameters including water temperature, salinity, depth and turbidity have been monitored at a series of locations in Passamaquoddy Bay, the St. Croix River, and along the Bay of Fundy coast, including the Musquash estuary Marine Protected Area (MPA). This dataset includes seasonal CTD (conductivity, temperature and depth) and turbidity data starting in spring 2023. Instruments are maintained through the winter months at a limited number of sites. Data collection methods are primarily moored instruments on the bottom in water depths of 5-90 meters, and a few buoyant surface floats. Overall, this dataset captures seasonal dynamics in near-shore marine environments in Passamaquoddy Bay, the St Croix River, the Bay of Fundy and the Musquash MPA. Cite this data as: Coastal Environmental Baseline Program (Maritimes Region), Northwest Fundy Shores conductivity, temperature and depth data. Published in May 2025. Coastal Environmental Baseline Program. Coastal Ecosystems Science Division, Fisheries and Oceans Canada, St. Andrews, N.B. 14-02-2025

The Marine Biodiversity Observation Network Pole to Pole (MBON P2P) effort seeks to develop a framework for the collection, use and sharing of marine biodiversity data in a coordinated, standardized manner leveraging on existing infrastructure managed by the Global Ocean Observing System (GOOS; IOC-UNESCO), the GEO Biodiversity Observation Network (GEO BON), and the Ocean Biogeographic Information System (OBIS). The MBON Pole to Pole aims to become a key resource for decision-making and management of living resource across countries in the Americas for reporting requirements under the Intergovernmental Science-Policy Platform on Biodiversity and Ecosystem Services (IPBES), Aichi Targets of the Convention of Biological Diversity (CBD), and the UN 2030 Agenda for Sustainable Development Goals (SDGs).This collection corresponds to the species registered on rocky shores of the Musquash Harbour, Passamaquoddy Bay and Mispec Bay, New Brunswick, Canada, using the MBON P2P sampling protocol for rocky shores, with funding from the Government of Canada's Coastal Environmental Baseline Program.Citation: Reinhart B, Cooper A, Nason R, Jonah L (2025). MBON POLE TO POLE: ROCKY SHORE BIODIVERSITY OF MUSQUASH HARBOUR, PASSAMAQUODDY BAY AND MISPEC BAY. Version 1.7. Caribbean OBIS Node. Samplingevent dataset. https://ipt.iobis.org/mbon/resource?r=rockyshoresbayoffundynb&v=1.7

From August 5th to September 3rd, 2012, Fisheries and Oceans Canada conducted a baseline survey of marine fishes and their habitats on the Canadian Beaufort Shelf and slope. Sampling was conducted from the F/V Frosti at 28 stations along four transects. Standardized sampling was conducted at pre-determined depth stations (20-40, 75, 200, 350, 500, 750, and 1000 m) using a variety of sampling equipment including benthic fishing trawls, plankton nets, sediment cores, and CTD and water sample profiles. A specialized CTD probe (UCTD) was deployed at an additional 30 locations while the ship was underway. Presented here is the information on the sampling locations, and the sampling gear deployed at each station.

Description:Biophysical Units: Under the Pacific Marine Ecological Classification System (PMECS; DFO 2016; Rubidge et al. 2016), biophysical units are areas of distinct physiographic and oceanographic conditions and processes that shape species composition at spatial extents of 1000s of km. Geomorphic units:Geomorphic units or geozones are discrete geomorphological structures at the scale of 100s of km that are assumed to have distinctive biological assemblages (e.g., plateaus, ridges, seamounts, canyons). Although the spatial scale of geomorphic units is nested within biophysical units, a single geomorphic unit such as a trough may span more than one biophysical unit. The following 5 layers are included in this geodatabase:1. Biophysical_Units_L4A - Predicted PMECS Biophysical Units (Level 4A) output from the random forest analysis2. Biophysical_Units_L4B - Predicted PMECS Biophysical Units (Level 4B) output from the random forest analysis3. Biophysical_Units_ProbAssign_L4AB - Layer showing the probability that a grid cell was assigned to a given biophysical unit in the final random forest predictive modelling step4. Cluster_L4AB - Layer showing the output of species assemblage cluster analysis5. Geomorphic_Units - Geomorphic units for the BC coast that combines geomorphic units produced by Rubidge et al. 2016) and Proudfoot and Robb (2022).Methods:Biophysical Units:Rubidge et al. (2016) used a two-step process to identify biophysical units in British Columbia. First, a cluster analysis based on the similarity of species composition was used to group sites with similar species into distinct biological assemblages. Second, a random forest analysis was used to identify environmental correlates of the biological assemblages identified by the cluster analysis and to predict and assign the biological assemblage present in areas with too few biological data. Two different similarity thresholds were used to identify two levels (4A, 4B) of biophysical units; see Rubidge et al. (2016) for details. Indicator species for each assemblage (biophysical unit) were also identified.Geomorphic units:Rubidge et al. (2016) used the benthic terrain modeller (BTM) tool with broad and fine-scale benthic positioning index (BPI) parameters to define geomorphic units on the continental shelf in the Northern Shelf Bioregion and the continental slope in both the Northern Shelf Bioregion and Southern Shelf Bioregion. In 2022, geomorphic units were produced for the Strait of Georgia and Southern Shelf Bioregions following the same methods as Rubidge et al. (2016) (Proudfoot and Robb 2022). The geomorphic units produced as part of the PMECS process were merged with the geomorphic units produced for the Strait of Georgia and Southern Shelf bioregions to produce a continuous spatial data product representing geomorphic units for the Canadian Pacific continental shelf and slope. After merging, the geomorphic units produced in 2016 were unchanged (i.e., they are consistent with the original geomorphic units described in Rubidge et al. 2016).Data Sources:From Rubidge et al. (2016): Species data was taken from Fisheries and Oceans Canada (DFO) standardized fisheries-independent research surveys: groundfish trawl and long-line (2003-2013), Tanner Crab trawl and trap (2000–2006), and Dungeness Crab trap (2000–2014). Environmental data came from NASA, the Canadian Hydrographic Service, Fisheries and Oceans Canada, Bio-ORACLE, and elsewhere (details in Rubidge et al. 2016). From Proudfoot and Robb (2022): bathymetry data came from Natural Resources Canada (details in Proudfoot and Robb 2022).Uncertainties:The data is intended for use at the bioregional scale, and caution should be used for finer-scale analyses.