Home /Search
Search datasets
We have found 678 datasets for the keyword " marine safety". You can continue exploring the search results in the list below.
Datasets: 103,401
Contributors: 42
Results
678 Datasets, Page 1 of 68
Biological Sensitivity Mapping for Oil Spill Planning and Response, Quebec Region
The Planning for an Environmental Response (PIER) initiative falls under the umbrella of the Government of Canada's Oceans Protection Plan (OPP), whose goal is preserving marine ecosystems vulnerable to increased transportation and the development of the marine industry (https://pm.gc.ca/en/news/backgrounders/2016/11/07/canadas-oceans-protection-plan-preserving-and-restoring-canadas). The PIER was established in response to recommendations made in a 2013 report "A review of Canada's ship-source spill preparedness and response regime " by the Tanker Safety Expert Panel (https://tc.canada.ca/en/marine-transportation/marine-safety/tanker-safety-expert-panel). One of the recommendations calls on Fisheries and Oceans (DFO) to work with Environment and Climate Change Canada (ECCC) to collect and compile information on sensitive species and environments for each Canadian Coast Guard (CCG) response area and make it publicly available.The PIERs’ main mandate is to acquire and update biological sensitivity data under its jurisdiction for preparation and response purposes in the event of an oil spill. With DFO-Science, PIER supports ECCC's National Environmental Emergencies Centre (NEEC) and the CCG in their preparations and responses through the sharing of data on biological sensitivities, the development of response tools and expert advice.In this vein, DFO published an analysis in 2018 that aimed to identify the most vulnerable components of the St. Lawrence in order to prioritize them during data collection if gaps were identified (Desjardins et al. 2018). This exercise highlighted the vulnerability of several biological components and important data gaps, particularly in coastal areas. As a result of this finding, the Quebec region PIEI team embarked on a collaborative project with the Université du Québec à Rimouski (UQAR) to map eelgrass beds, tidal marshes and macroalgal beds. In consultation with other DFO-Science data producers, this team has also created datasets adapted for response purposes, notably regarding bivalves and marine mammals. These layers may be used for oil spill preparedness and response by DFO-Quebec Region's Environmental Incident Coordinator, NEEC and CCG. Several of them, deemed relevant in the first 72 hours following a spill, have been transmitted to the NEEC.
Canadian Marine Invasive Screening Tool (CMIST)
CMIST is a peer-reviewed screening-level risk assessment tool for marine invasive species (Drolet et al. 2016). It is a short questionnaire that follows the invasion process from arrival to impact and is designed so an informed assessor can evaluate one species in an assessment area in approximately one day using easily accessible information from internet databases, primary literature, and grey literature. Species can be those with an invasion history in an area or those that are candidates for future invasions.CMIST is score-based and incorporates both likelihood and impact of invasion as well as uncertainty. Questions are general to make CMIST broadly applicable to different taxa, different assessment areas, and different project goals. To date, CMIST has been tested with molluscs, tunicates, crustaceans, and polychaetes introduced or at risk of introduction to three Canadian marine ecoregions (DFO 2009). CMIST has also been successfully applied to non-indigenous freshwater fish in British Columbia with adapted guidelines (T. Therriault, pers. comm.). Upon completion, CMIST produces a risk score adjusted for the assessor’s uncertainty which, combined with information collected during the assessment, can be used to assist in management decisions. For example, in 2015, CMIST assessments were used to identify high risk invaders in three Canadian marine ecoregions (DFO 2016).
Vehicle and sonde data from an autonomous underwater vehicle survey of Musquash Marine Protected Area
The Coastal Environmental Baseline Program is a multi-year Fisheries and Oceans Canada initiative designed to work with Indigenous and local communities and other key parties to collect coastal environmental data at six pilot sites across Canada (Port of Vancouver, Port of Prince Rupert, Lower St. Lawrence Estuary, Port of Saint John, Placentia Bay, and Iqaluit). The goal of the Program is to gather local information in these areas in effort to build a better understanding of marine ecological conditions. The Maritimes region has developed a habitat classification program to align with the oceanographic interests and data needs of local communities and stakeholders, with the goal of sharing this information via open data. In 2020, a habitat survey in the lower Musquash Marine Protected Area (MPA) was undertaken to further develop this project, using an Autonomous Underwater Vehicle (AUV) equipped with high-frequency (450 kHz) side scan sonar to build a habitat map of the MPA. This dataset includes mosaicked series of sonar images (raw & position-corrected versions), covering roughly 6 km2 of marine and intertidal areas in the Musquash MPA. Doppler Velocity logs and mission-specific files for each survey are also included, along with detailed methodological documentation. These data were generated from 17 separate survey missions that were completed in August, September and October 2020.
Offshore Ecological and Human Use Information considered in Marine Protected Area Network Design in the Scotian Shelf Bioregion
In 2016-17, DFO Maritimes Region undertook a Marine Protected Area (MPA) network analysis for the Scotian Shelf-Bay of Fundy Bioregion. The analysis considered available bioregional-scale ecological and human use data in an effort to identify a draft MPA network design that would protect biodiversity while minimizing any potential impacts on commercial fishing and other industries. The data layers used for the offshore component of the MPA network analysis are provided here. These layers are not presented in their original forms and were modified (e.g. clipped, reclassified, etc.) specifically for use in the MPA network analysis. They should not be used for any other purpose. Please see Serdynska et al. 2021 for details on how each layer was created.Serdynska, A.R., Pardy, G.S., and King, M.C. 2021. Offshore Ecological and Human Use Information considered in Marine Protected Area Network Design in the Scotian Shelf Bioregion. Can. Tech. Rep. Fish. Aquat. Sci. 3382: xi + 100 p. https://publications.gc.ca/collections/collection_2021/mpo-dfo/Fs97-6-3382-eng.pdfCite this data as: Serdynska, A.R., Pardy, G.S., and King, M.C. Data of: Offshore Ecological and Human Use Information considered in Marine Protected Area Network Design in the Scotian Shelf Bioregion. Published: January 2022. Fisheries and Oceans Canada, Dartmouth, N.S. https://open.canada.ca/data/en/dataset/2d9cce9a-d634-4b49-879f-87c40c52acf2
Metadata from Scientific Dive-Based Surveys on the ridge of the Banc-des-Américains Marine Protected Area for the monitoring of the atlantic wolffish (Anarhichas lupus)
This metadataset was compiled to document scientific dive operations conducted within the Banc-des-Américains Marine Protected Area (MPA). Its purpose is to enable the tracking of field activities carried out as part of ecological monitoring of the atlantic wolffish (Anarhichas lupus) habitats and other key species.Metadata were collected for each scientific dive, following a standardized protocol implemented since 2014 that includes the date, participating team, GPS coordinates, depth, and dive duration.The released dataset contains only descriptive and contextual information related to each dive operation: dive identifier, site, date, location, conditions of execution, method used, and environmental variables when recorded. It does not include photographs, videos, raw biological observations, or analysis results.Quality control involves standardization of the metadata form, verification of GPS positions and recorded depths, as well as annual internal review of the dive series by the scientific coordination team. Established procedures ensure the completeness, consistency, and traceability of the descriptive data provided.
Coastal Environmental Baseline Program (Maritimes Region), Northwest Fundy Shores conductivity, temperature and depth data
The Coastal Environmental Baseline Program is a multi-year Fisheries and Oceans Canada initiative designed to work with Indigenous and local communities and other key parties to collect coastal environmental data at a series of sites across Canada, to build a better understanding of existing marine ecological conditions. The program began data collection in 2019, and with the onset of Phase 2 in 2023, the Maritimes region study area was expanded and renamed ‘Northwest Fundy Shores’. A physical oceanography program was designed to align with the oceanographic interests and data needs of local interest holders. Starting in 2023, oceanographic parameters including water temperature, salinity, depth and turbidity have been monitored at a series of locations in Passamaquoddy Bay, the St. Croix River, and along the Bay of Fundy coast, including the Musquash estuary Marine Protected Area (MPA). This dataset includes seasonal CTD (conductivity, temperature and depth) and turbidity data starting in spring 2023. Instruments are maintained through the winter months at a limited number of sites. Data collection methods are primarily moored instruments on the bottom in water depths of 5-90 meters, and a few buoyant surface floats. Overall, this dataset captures seasonal dynamics in near-shore marine environments in Passamaquoddy Bay, the St Croix River, the Bay of Fundy and the Musquash MPA. Cite this data as: Coastal Environmental Baseline Program (Maritimes Region), Northwest Fundy Shores conductivity, temperature and depth data. Published in May 2025. Coastal Environmental Baseline Program. Coastal Ecosystems Science Division, Fisheries and Oceans Canada, St. Andrews, N.B. 14-02-2025
Evaluating an Autonomous eDNA Sampler for Marine Environmental Monitoring: Short- and Long-Term Applications
We evaluated an autonomous environmental DNA sampler produced by Dartmouth Ocean Technologies Inc (Dartmouth, Canada) compared to time-at-sample filtration in the laboratory to determine the performance of moored samplers for monitoring in the marine world. We deployed three autonomous samplers from DOT in the Bedford Basin (Canada) over a nine-week period in summer/fall 2023. The samplers filtered seawater in situ at programmed interviews over this time period, and we collected contemporaneous samples with a standard vacuum pump during each sampling period. Both eDNA sample types captured similar fish diversity, including typical diversity for the Northwest Atlantic. The invertebrate community detected using the COI marker was different between each sample type, likely due to differences in filter pore size. We found biofouling on the moored samplers was minimal over the study period, even in a high-traffic area such as the Bedford Basin, likely due to the relatively short experimental period, and copper screening covering in the inlet and outlet valves of the instruments. Overall, our results show promise to deploy autonomous eDNA samplers in marine conservation areas to contribute to monitoring in the temperate ocean, but further testing over longer periods of time is needed to determine if DNA remains well-preserved in the autonomous samplers at ambient ocean temperatures.Cite this data as: Jeffery, N.W., Van Wyngaarden, M., and Stanley, R.R.E. Evaluating an Autonomous eDNA Sampler for Marine Environmental Monitoring: Short- and Long-Term Applications. Published: December 2024. Coastal Ecosystems Science Division, Maritimes Region, Fisheries and Oceans Canada, Dartmouth NS.
Canada's designated alternate ballast water exchange areas
This data is intended to identify Canadian Alternate Exchange Areas described in https://tc.canada.ca/en/marine-transportation/marine-safety/list-canada-s-designated-alternate-ballast-water-exchange-area-fresh-waters-tp-13617e-2021. The data is not intended for navigation purposes.According to Canada’s Ballast Water Regulations, if your vessel enters waters under Canadian jurisdiction from somewhere other than the U.S. waters within the Great Lakes Basin, and it cannot conduct a ballast water exchange in the areas set out in paragraphs 14(1)(a) and (b) of the regulations, then it will have to conduct a ballast water exchange in one of the areas listed below:-Gulf of St. Lawrence-Atlantic Canada-Western Canada-Canadian Eastern Arctic-Canadian Western Arctic: If you bring your vessel to a Canadian port, offshore terminal or anchorage area in the Western Arctic ballast water must be exchanged in an area as far away from shore as possible, where the water is more than 100 meters deep.Legal Constraints: Users should be aware that the polygons depicting ballast water exchange areas are intended for illustration only and should not be used for navigational or legal purposes.
Seabed Mooring Deployments in the Tarium Niryutait Marine Protected Area
PURPOSE:Eastern Beaufort Sea beluga whales form one of the largest summering aggregations of the species in the Mackenzie Estuary. In 2010, the Tarium Niryutait Marine Protected Area (TNMPA) was designated to protect beluga whales and their habitats As a part of ongoing ecological monitoring efforts in the TN MPA, passive acoustic monitoring (PAM) was implemented in 2011 to act as continuous monitoring method, filling the temporal gaps associated with historical aerial surveys. Beginning in 2014, PAM effort increased each year, and oceanographic sensors were added to moorings to (1) better understand oceanographic conditions within the TN MPA and (2) examine the environmental parameters that drive beluga movement and habitat use patterns within the estuary. Several studies using this dataset have been completed, and others are ongoing. However, much more can be done with the acoustic and environmental data. The purpose of this report is to outline deployment methods and instrument settings for moorings to support the full use of the data collected. DESCRIPTION:Each summer, Eastern Beaufort Sea beluga whales form one of the largest aggregations of the species in the Mackenzie Estuary. In 2010, the Tarium Niryutait Marine Protected Area (TNMPA) was designated in the estuary to protect beluga whales and their habitats. As a part of ongoing ecological monitoring efforts in the TN MPA, passive acoustic monitoring (PAM) was implemented in 2011 to act as continuous monitoring method, filling the temporal gaps associated with historical aerial surveys. Beginning in 2014, PAM effort increased each year, and oceanographic sensors were added to each PAM mooring to (1) better understand oceanographic conditions (i.e., temperature, salinity, turbidity, and wave conditions) within the TN MPA and (2) to examine the environmental parameters that drive beluga movement and habitat use patterns within the estuary. Moorings have been deployed with varying configurations of oceanographic sensors in Kugmallit Bay since 2015, but typically record water temperature, salinity, depth, and wave conditions. In 2018, the program was expanded to the Niaqunnaq parcel of the MPA (Shallow Bay), and in 2021 it was expanded again to the Okeevik parcel of the MPA. These observatories have provided new knowledge about drivers of beluga habitat use in the TN MPA, in particular in Kittigaryuit, but more recently in Niaqunnaq and Okeevik.
Beaufort Sea Marine Fishes Project (BSMFP) 2012 - Fish identification and measurements
Basic biological data for all fish caught during the 2012 BSMFP expedition. Includes identification, weight, length (total, fork, and, standard), liver weight, gonad weight, sex and maturity level.
Tell us what you think!
GEO.ca is committed to open dialogue and community building around location-based issues and topics that matter to you.
Please send us your feedback