STR - Facilities and structures (structure)Man-made construction. For example, resources describing buildings, museums, churches, schools, hospitals, factories, housing, monuments, and towers.

An accurate depiction of road structure construction history of the Highway Network in Manitoba.Manitoba Infrastructure --> Highway Engineering--> Highway Planning and Design (HPD) manages the Highway Inventory System (HIS). This system tracks road structure and construction history of Manitoba's Road Network. Published annually, this layer aids provincial engineers in planning and managing construction projects, both present and future. The department’s linear referencing system (LRS) uses control sections as a linear referencing method (LRM). These control section are further divided into subsections. It is on these subsections that road structure and construction history are tracked in the highway inventory system database. Please note that this feature layer primarily contains only the roads Manitoba Infrastructure is responsible for, i.e. Provincial Trunk Highways, Provincial Roads and Access Roads. It does not include municipal mile or grid roads. However, you may also see Earth Roads (under construction) or Other roads (such as those passing through national parks and are federal responsibility). A newer version of this data is available: Manitoba Highway Inventory 2018. Field List - FIELD NAME (Field Alias (i.e. display name)) in parenthesis) OBJECTID (OBJECTID) - Sequential, unique whole numbers are automatically generated.SHAPE (SHAPE) - A field to hold geometry information. ID (ID) - Oracle's unique identifierCS_ID (Control Section ID) - Non unique identifier linking segment to its respective control section. For example, a control section may have numerous geometry segments and each will have the same CS_ID.CS_KEY (Control Section Key) - An information rich key containing Region (two digits), Road Number (three digits), Section number (three digits), the Road Type (one character), and direction of travel (one character). SS_ID (Subsection ID) - Control Sections are further divided into Subsections. This is the subsection ID field.REGION_NO (MI Region) - The Manitoba Infrastructure region the segment is in Regions 1-5.ROAD_NO (Road Number) - The road number. Note co-routes will have the lesser highway number. SECTION_NO (Section Number) - The section number from the CS_KEY.ROAD_TYPE (Road Type) - H = Highway, E = Earth Road, and O= 'Other" road (such as through a national park because the road is not a responsibility of MI.) ROAD_DIRECTION (Road Direction) - A = ahead direction on a divided highway (i.e. following the digitizing direction), B = Back direction on a divided highway (i.e. against the digitizing direction, and U= an undivided highway.START_KM (Start Kilometre (KM)) - Start KM, is the start of the sub section within a control Section. This is part of the linear referencing method used for dynamic segmentation.END_KM (End Kilometre (KM)) - End KM is the end of the sub section within a Control Section. This is part of the linear referencing method used for dynamic segmentation.LENGTH_KM (Length (KM)) - End Kilometre minus the Start Kilometre.SECTION_DESC (Subsection Description) - A text description of where the subsection starts and ends. ROAD_TYPE_DESC (Road Type Description) - An unabbreviated version of Road Type above.ROAD_DIRECTION_DESC (Road Direction Description) - An unabbreviated version of Road Direction above.FUNCTIONAL_CLASS (Functional Class) - Functional Class: Expressway, Primary Arterial, Secondary Arterial and CollectorDIVIDED_STATUS (Divided Status) - Highway is divided or undivided. LANES (Number of Lanes) - The number of lanes the road has. MEDIAN_TYPE (Median Type) - Type of median: Raised Median, Depressed Median, Flush Median, Barrier and No Median.MEDIAN_WIDTH (Median Width (m)) - The width of the median, in metres.ROW_WIDTH (Row Width (m)) - The total width of the right-of-way in metres.SUBGRADE_WIDTH (Subgrade Width (m)) - The width of the earth embankment in metres. REGRADE_YEAR (Re-grade Year) - The year the road was last regraded.REGRADE_DESCRIPTION (Re-grade Description) - Description of what re-grading was done.OUTSIDE_SHLDR_TYPE (Outside Shoulder Type) - Type of outside shoulder: AST, Curbed, Fully Paved, Gravel, No Shoulders and N/A.OUTSIDE_SHLDR_WIDTH (Outside Shoulder Width (m)) - The width of the outside shoulder in metres.OUTSIDE_PAVED_WIDTH (Outside Paved Width (m)) - The width of the paved surface of the outside shoulder in metres.INSIDE_SHLDR_TYPE (Inside Shoulder Type) - Type of inside shoulder: Curbed, Fully Paved, Gravel, No Shoulders and N/A.INSIDE_SHLDR_WIDTH (Inside Shoulder Width (m)) - The width of the inside shoulder in metres.INSIDE_PAVED_WIDTH (Inside Paved Width (m)) - The width of the paved surface of the inside shoulder in metres.SURFACE_TYPE (Surface Type) - The type of surfacing on the road: A Base, AST, Bituminous (Bpm), Bituminous B, Bituminous C, C Base, Concrete, Granular, Reclaimed Asphalt Pavement and Road MixSURFACE_WIDTH (Surface Width (m)) - The surface width is the width of the driving lanes.SURFACE_DEPTH (Surface Depth (mm)) - Thickness of the surface layer (mm).SURFACE_YEAR (Surface Year) - The year the surface was constructed.BASE_1 (Base Layer 1) - 1st subsurface layer. 1 = present, 0 = not presentBASE_1_TYPE (Base Layer 1 Type) - Material type of 1st subsurface layer of the road structure.BASE_1_DEPTH (Base Layer 1 Depth (mm)) - Thickness of 1st subsurface layer of road structure in mm.BASE_1_YEAR (Base Layer 1 Year) - Year materials placed or modified for 1st subsurface layer.BASE_2 (Base Layer 2) - 2nd subsurface layer. 2 = present, 0 = not presentBASE_2_TYPE (Base Layer 2 Type) - Material type of 2nd subsurface layer of road structure.BASE_2_DEPTH (Base Layer 2 Depth (mm)) - Thickness of 2nd subsurface layer of road structure in mm.BASE_2_YEAR (Base Layer 2 Year) - Year materials placed or modified for 2nd subsurface layer.BASE_3 (Base Layer 3) - 3rd subsurface layer. 3 = present, 0 = not presentBASE_3_TYPE (Base Layer 3 Type) - Material type of 3rd subsurface layer of road structure.BASE_3_DEPTH (Base Layer 3 Depth (mm)) - Thickness of 3rd subsurface layer of road structure in mm.BASE_3_YEAR (Base Layer 3 Year) - Year materials placed or modified for 3rd subsurface layer.BASE_4 (Base Layer 4) - 4th subsurface layer. 4 = present, 0 = not presentBASE_4_TYPE (Base Layer 4 Type) - Material type of 4th subsurface layer of road structure.BASE_4_DEPTH (Base Layer 4 Depth (mm)) - Thickness of 4th subsurface layer of road structure in mm.BASE_4_YEAR (Base Layer 4 Year) - Year materials placed or modified for 4th subsurface layer.BASE_5 (Base Layer 5) - 5th subsurface layer. 5 = present, 0 = not presentBASE_5_TYPE (Base Layer 5 Type) - Material type of 5th subsurface layer of road structure.BASE_5_DEPTH (Base Layer 5 Depth (mm)) - Thickness of 5th subsurface layer of road structure in mm.BASE_5_YEAR (Base Layer 5 Year) - Year materials placed or modified for 5th subsurface layer.BASE_6 (Base Layer 6) - 6th subsurface layer. 6 = present, 0 = not presentBASE_6_TYPE (Base Layer 6 Type) - Material type of 6th subsurface layer of road structure.BASE_6_DEPTH (Base Layer 6 Depth (mm)) - Thickness of 6th subsurface layer of road structure in mm.BASE_6_YEAR (Base Layer 6 Year) - Year materials placed or modified for 6th subsurface layer.BASE_7 (Base Layer 7) - 7th subsurface layer. 7 = present, 0 = not presentBASE_7_TYPE (Base Layer 7 Type) - Material type of 7th subsurface layer of road structure.BASE_7_DEPTH (Base Layer 7 Depth (mm)) - Thickness of 7th subsurface layer of road structure in mm.BASE_7_YEAR (Base Layer 7 Year) - Year materials placed or modified for 7th subsurface layer.<TERRAIN_TYPE (Terrain Type) - General terrain conditions: Flat, Rolling and Rugged.CONSTRUCTION_STATUS (Construction Status) - Construction completed or carried over.UPDATED_YYYYMMDD (Updated Date) - Date the record was updated.SHAPE_Length (Length) - Segment length, automatically generated by ArcGIS.

Applications for spatial areas occurring on Crown land in which oil and gas activities will take place. Construction corridors allow for flexibility in the movement, placement and construction of oil and gas activity. This dataset is updated nightly.

An accurate depiction of road structure construction history of the Highway Network in Manitoba.Manitoba Infrastructure, Highway Engineering, Highway Planning and Design (HPD) manages the Highway Inventory System (HIS). This system tracks road structure and construction history of Manitoba's Road Network. Published annually, this layer aids provincial engineers in planning and managing construction projects, both present and future. The department’s linear referencing system (LRS) uses control sections as a linear referencing method (LRM). These control section are further divided into subsections. It is on these subsections that road structure and construction history are tracked in the highway inventory system database.Please note that this feature layer primarily contains only the roads Manitoba Infrastructure is responsible for, i.e. Provincial Trunk Highways, Provincial Roads and Access Roads. It does not include municipal mile or grid roads. However, you may also see Earth Roads (under construction) or Other roads (such as those passing through national parks and are federal responsibility).Fields included (Alias (Field Name): Field description.) OBJECTID (OBJECTID): Sequential, unique whole numbers are automatically generated. SHAPE (SHAPE): A field to hold geometry information. ID (ID): Oracle's unique identifier Control Section ID (CS_ID): Non unique identifier linking segment to its respective control section. For example, a control section may have numerous geometry segments and each will have the same CS_ID. Control Section Key (CS_KEY): An information rich key containing Region (two digits), Road Number (three digits), Section number (three digits), the Road Type (one character), and direction of travel (one character). Subsection ID (SS_ID): Control Sections are further divided into Subsections. This is the subsection ID field. MI Region (REGION_NO): The Manitoba Infrastructure region the segment is in Regions 1-5. Road Number (ROAD_NO): The road number. Note co-routes will have the lesser highway number. Section Number (SECTION_NO): The section number from the CS_KEY. Road Type (ROAD_TYPE): H = Highway, E = Earth Road, and O= 'Other" road (such as through a national park because the road is not a responsibility of MI.) Road Direction (ROAD_DIRECTION): A = ahead direction on a divided highway (i.e. following the digitizing direction), B = Back direction on a divided highway (i.e. against the digitizing direction, and U= an undivided highway. Start Kilometre (KM) (START_KM): Start KM, is the start of the sub section within a control Section. This is part of the linear referencing method used for dynamic segmentation. End Kilometre (KM) (END_KM): End KM is the end of the sub section within a Control Section. This is part of the linear referencing method used for dynamic segmentation. Length (KM) (LENGTH_KM): End Kilometre minus the Start Kilometre. Subsection Description (SECTION_DESC): A text description of where the subsection starts and ends. Road Type Description (ROAD_TYPE_DESC): An unabbreviated version of Road Type above. Road Direction Description (ROAD_DIRECTION_DESC): An unabbreviated version of Road Direction above. Functional Class (FUNCTIONAL_CLASS): Functional Class: Expressway, Primary Arterial, Secondary Arterial and Collector Divided Status (DIVIDED_STATUS): Highway is divided or undivided. Number of Lanes (LANES): The number of lanes the road has. Median Type (MEDIAN_TYPE): Type of median: Raised Median, Depressed Median, Flush Median, Barrier and No Median. Median Width (m) (MEDIAN_WIDTH): The width of the median, in metres. Row Width (m) (ROW_WIDTH): The total width of the right-of-way in metres. Subgrade Width (m) (SUBGRADE_WIDTH): The width of the earth embankment in metres. Re-grade Year (REGRADE_YEAR): The year the road was last regraded. Re-grade Description (REGRADE_DESCRIPTION): Description of what re-grading was done. Outside Shoulder Type (OUTSIDE_SHLDR_TYPE): Type of outside shoulder: AST, Curbed, Fully Paved, Gravel, No Shoulders and N/A. Outside Shoulder Width (m) (OUTSIDE_SHLDR_WIDTH): The width of the outside shoulder in metres. Outside Paved Width (m) (OUTSIDE_PAVED_WIDTH): The width of the paved surface of the outside shoulder in metres. Inside Shoulder Type (INSIDE_SHLDR_TYPE): Type of inside shoulder: Curbed, Fully Paved, Gravel, No Shoulders and N/A. Inside Shoulder Width (m) (INSIDE_SHLDR_WIDTH): The width of the inside shoulder in metres. Inside Paved Width (m) (INSIDE_PAVED_WIDTH): The width of the paved surface of the inside shoulder in metres. Surface Type (SURFACE_TYPE): The type of surfacing on the road: A Base, AST, Bituminous (Bpm), Bituminous B, Bituminous C, C Base, Concrete, Granular, Reclaimed Asphalt Pavement and Road Mix Surface Width (m) (SURFACE_WIDTH): The surface width is the width of the driving lanes. Surface Depth (mm) (SURFACE_DEPTH): Thickness of the surface layer (mm). Surface Year (SURFACE_YEAR): The year the surface was constructed. Base Layer 1 (BASE_1): 1st subsurface layer. 1 = present, 0 = not present Base Layer 1 Type (BASE_1_TYPE): Material type of 1st subsurface layer of the road structure. Base Layer 1 Depth (mm) (BASE_1_DEPTH): Thickness of 1st subsurface layer of road structure in mm. Base Layer 1 Year (BASE_1_YEAR): Year materials placed or modified for 1st subsurface layer. Base Layer 2 (BASE_2): 2nd subsurface layer. 2 = present, 0 = not present Base Layer 2 Type (BASE_2_TYPE): Material type of 2nd subsurface layer of road structure. Base Layer 2 Depth (mm) (BASE_2_DEPTH): Thickness of 2nd subsurface layer of road structure in mm. Base Layer 2 Year (BASE_2_YEAR): Year materials placed or modified for 2nd subsurface layer. Base Layer 3 (BASE_3): 3rd subsurface layer. 3 = present, 0 = not present Base Layer 3 Type (BASE_3_TYPE): Material type of 3rd subsurface layer of road structure. Base Layer 3 Depth (mm) (BASE_3_DEPTH): Thickness of 3rd subsurface layer of road structure in mm. Base Layer 3 Year (BASE_3_YEAR): Year materials placed or modified for 3rd subsurface layer. Base Layer 4 (BASE_4): 4th subsurface layer. 4 = present, 0 = not present Base Layer 4 Type (BASE_4_TYPE): Material type of 4th subsurface layer of road structure. Base Layer 4 Depth (mm) (BASE_4_DEPTH): Thickness of 4th subsurface layer of road structure in mm. Base Layer 4 Year (BASE_4_YEAR): Year materials placed or modified for 4th subsurface layer. Base Layer 5 (BASE_5): 5th subsurface layer. 5 = present, 0 = not present Base Layer 5 Type (BASE_5_TYPE): Material type of 5th subsurface layer of road structure. Base Layer 5 Depth (mm) (BASE_5_DEPTH): Thickness of 5th subsurface layer of road structure in mm. Base Layer 5 Year (BASE_5_YEAR): Year materials placed or modified for 5th subsurface layer. Base Layer 6 (BASE_6): 6th subsurface layer. 6 = present, 0 = not present Base Layer 6 Type (BASE_6_TYPE): Material type of 6th subsurface layer of road structure. Base Layer 6 Depth (mm) (BASE_6_DEPTH): Thickness of 6th subsurface layer of road structure in mm. Base Layer 6 Year (BASE_6_YEAR): Year materials placed or modified for 6th subsurface layer. Base Layer 7 (BASE_7): 7th subsurface layer. 7 = present, 0 = not present Base Layer 7 Type (BASE_7_TYPE): Material type of 7th subsurface layer of road structure. Base Layer 7 Depth (mm) (BASE_7_DEPTH): Thickness of 7th subsurface layer of road structure in mm. Base Layer 7 Year (BASE_7_YEAR): Year materials placed or modified for 7th subsurface layer. Terrain Type (TERRAIN_TYPE): General terrain conditions: Flat, Rolling and Rugged. Construction Status (CONSTRUCTION_STATUS): Construction completed or carried over. Updated Date (UPDATED_YYYYMMDD): Date the record was updated.

Identification of a potential spawning site for lumpfish during an ichtyofauna inventory conducted in the eelgrass in Sept-Îles bay by Calderón (1996).Purpose:The 1996 document by par Isabel Calderón has been achieved by the "Corporation de protection de l'environnement de Sept-Îles" with the support of Department of Fisheries and Oceans (DFO) as part of the "Biodiversity" program, St. Lawrence Vision 2000 (Canada).Source:Calderón, I. 1996. Caractérisation des habitats du poisson de la baie de Sept-Îles - Phase II. Corporation de protection de l'environnement de Sept-Îles. 37 pages.

The dataset represents known concentration areas of harvested or unharvested Softshell clam (Mya arenaria) in the intertidal zone of the Estuary and the Gulf of St. Lawrence, Quebec region. The dataset was created for the National environmental emergencies centre (NEEC) for preparation and response in case of an oil spill. Concentration areas were defined using Fisheries and Oceans Canada (DFO) inventories conducted between 2000 and 2020.This layer is dependent on the inventories carried out and thus only represents known clam areas. For example, for the Haute-Côte-Nord, inventories have been limited to areas open to harvesting (with the exception of 4 sectors), but it is known that the Softshell clam is also present outside these areas. In addition, little information was available for the Moyenne and Basse-Côte-Nord.This data layer does not represent the general distribution of the species nor the extent to which fishing is allowed. The extent of shellfish beds may vary over time in response to, among others harvesting and the recruitment rates. The boundaries of polygons from inventory data may be underestimated relative to the actual size of the deposit since the inventories were conducted at the location where the resource is most abundant, without necessarily sampling the entire bed. However, the accuracy is sufficient for the protection and management needs of the resource in the event of an environmental incident. Data sources and references:Brulotte, S. 2011. Évaluation des stocks de mye commune des eaux côtières du Québec. Secr. can. de consult. sci. du MPO. Doc. de rech. 2011/044. x + 53 p.Brulotte, S. 2018. Évaluation de la mye commune (Mya arenaria) des eaux côtières du Québec en 2016 – méthodologie et résultats. Secr. can. de consult. sci. du MPO. Doc. de rech. 2018/004. ix + 60 p.Brulotte, S. 2020. Évaluation des stocks de la mye commune (Mya arenaria) des eaux côtières du Québec en 2019 – méthodologie et résultats. Secr. can. de consult. sci. du MPO. Doc. de rech. 2020/055. vii + 43 p.Brulotte, S. 2022. Résultats des inventaires de gisements de mye commune (Mya arenaria) réalisés de 2016 à 2020 et mise à jour des résultats de ceux effectués de 2001 à 2014 au Québec. Secr. can. de consult. sci. du MPO. Doc. de rech. 2022/xxx. (in progress)Brulotte, S. and M. Giguère. 2003. Évaluation d'un gisement de mye commune (Mya arenaria) de l'embouchure de la rivière Mingan, Québec, Rapp. can. ind. sci. halieut. aquat. No. 2511: xi + 58.Brulotte, S., M. Giguère, S. Brillon and F. Bourque. 2006. Évaluation de cinq gisements de mye commune (Mya arenaria) aux Îles-de-la-Madeleine, Québec, de 2000 à 2003. Rapp. tech. can. sci. halieut. aquat. 2640 : xii + 92 p.Brulotte, S., Giguère, M. and Duluc, C. 2015. Essais de techniques de captage du naissain de mye commune (Mya arenaria) sur la rive nord de l’estuaire et du golfe du Saint-Laurent. Rapp. tech. can. sci. halieut. aquat. 3084 : ix + 60 p.Giguère, M., S. Brulotte and F. Hartog.2007. Évaluation de quelques gisements de mye commune (Mya arenaria) de la rive sud de l'estuaire du Saint-Laurent en 2005 et 2006. Rapp. can. ind. sci. halieut. aquat. No. 2738: xi + 107.Giguère, M., S. Brulotte, M. Boudreau and M.-F. Dréan. 2008. Évaluation de huit gisements de mye commune (Mya arenaria) de la rive nord de l’estuaire du Saint-Laurent de 2002 à 2008. Rapp. tech. can. sci. halieut. aquat. 2821 : x + 91 p.Roy, I., M. Giguère, S. Brulotte and M. Gagnon. 2003. Évaluation de douze gisements de mye commune (Mya arenaria) du sud de la Gaspésie, Rapp. Tech. can. sci. halieut. aquat. 2469: xvi + 140 p.

The SMTC map and database provides the location of, and information about completed, under construction, or planned mass timber projects and manufacturing facilities in Canada. Project information includes building size, height, occupancy, mass timber materials used, year of construction, and other criteria. Manufacturer information includes facility location, materials produced, and production capacity.

Layer that includes the known information on rainbow smelt breeding and feeding areas in the Saguenay River, the fluvial section and Estuary of St. Lawrence according to a literature review of documents produced between 1977 and 2000.Additional InformationRainbow smelt's breeding and feeding areas were produced according to a literature review of the following documents:Argus inc. (Les consultants en environnement). 1995b. Barachois de Malbaie: étude d'avant-projet de conservation et de mise en valeur. Rapport présenté au Club des ornithologues de la Gaspésie dans le cadre du programme Saint-Laurent Vision 2000. 71 p. + ann.Bouthillier, L., P. Dumont et G. Roy. 1993. Répertoire des habitats du poisson de la région de Montréal, Québec. Ministère du Loisir, de la Chasse et de la Pêche du Québec, Direction régionale de Montréal. ii + 6 p. + fiches d'habitats + 18 cartes d'habitats à l'échelle 1:50 000 + bibliographie 15 p.Dubé, J., M. Letendre, M. Beaudoin et B. Dumas. 1992. Marina l'Escale inc. Relevés sur l'habitat du poisson au printemps 1992. Lots 6-P, 7-P et littoral de la rivière Richelieu, Notre-Dame-du-Mont-Carmel, MRC du Haut-Richelieu. Québec, Ministère du Loisir, de la Chasse et de la Pêche, Service de l'aménagement et de l'exploitation de la faune, Montréal, 13 p. + annexes.Dumont, P. et R. Fortin. 1977. Relations entre les niveaux d'eau printaniers et la reproduction du Grand Brochet du Haut-Richelieu et de la baie Missisquoi. Université du Québec à Montréal, Département des sciences biologiques, pour le Bureau international Champlain Richelieu, Comité d'impact sur l'environnement, x + 108 p.Dumont, P., J. Leclerc et Y. Chagnon. 1990. Pêche électrique sur la rivière Yamaska le 18 avril 1990. Québec, Ministère du Loisir de la Chasse et de la Pêche, Service de l'aménagement et de l'exploitation de la faune, Montréal. [Données non publiées].Enquête auprès des agents des pêches du MPO. 1994.Fréchet, A., Dodson J.J., Powles, H. 1983. Les parasites de l'éperlan d'amérique (Osmerus mordax) anadrome du Québec et leur utilité comme étiquettes biologiques. Canadian journal of zoology no 61: 621-626.Gagnon, M., Y. Ménard et J.-F. La Rue. 1993. Caractérisation et évaluation des habitats du poisson dans la zone de transition saline du Saint-Laurent. Rapp. tech. can. sci. halieut. aquat. 1920: viii + 104 p.Jacquaz et coll. 1990. Étude biophysique de l'habitat du poisson de quatre barachois de la baie des Chaleurs.Lemieux, C. 1995. Acquisition de connaissances des habitats côtiers dans la région de Rimouski (1995). Rapport du Groupe-Conseil GENIVAR présenté au Ministère des Pêches et des Océans du Canada, Division de la Gestion de l’Habitat du Poisson, 52 pages + 2 annexes.Lemieux, C. et R. Lalumière. 1995. Acquisition de connaissances des habitats côtiers du barachois de Saint-Omer. Rap. du Groupe conseil Genivar inc. pour la DGHP, MPO, 44 pages + 3 ann.Lemieux, C. 1996. Acquisition de connaissances des habitats côtiers de l'Anse Saint-Jean et de la baie Sainte- Marguerite dans la région du Saguenay. Rap. du Groupe conseil Genivar inc. pour la DGHP, ministère des Pêches et Océans, 79 p. + annexes.Lesueur, C. 1995. Acquisition de connaissances du milieu côtier dans la batture de Saint-Fulgence. Rapport du Comité ZIP-Saguenay au ministère des Pêches et des Océans du Canada et au Ministère de l'Environnement et de la Faune. 38 p. + annexes.Lesueur, C. 1998. Acquisition de connaissances sur les poissons migrateurs et dulcicoles du Saguenay. Rapport du projet triennal : résultats obtenus de 1995 à 1998. Rapport du Comité ZIP-Saguenay au ministère des Pêches et des Océans Canada, au ministère de l'Environnement et de la Faune et à Patrimoine Canada. 74 p. + annexe.Letendre, M., B. Dumas et M. Beaudoin. 1990. Inventaire de la rivière des Prairies, au niveau de l'île de Pierre. Québec, Ministère du Loisir de la Chasse et de la Pêche, Service de l'aménagement et de l'exploitation de la faune, Montréal. [Travaux en cours].Logimer. 1985. Développement d'un programme de conservation et de reconstitution des habitats lagunaires gaspésiens. Rapport présenté à Pêches et Océans Canada, section Habitat du poisson. 306 p. et annexes.Naturam Environnement. 1997. Acquisition de connaissances et mise en valeur des habitats du poisson du complexe Baie Verte/Baie Laval, phase 3 : rapport final. Document réalisé par la Corporation de développpement de la Baie Verte avec l'aide du MPO dans le cadre du Plan d'action pour l'habitat du poisson.Pageau, G. et R. Tanguay. 1977. Frayères, sites propices à la reproduction, et sites de concentration de jeunes poissons d'intérêt sportif et commercial dans le fleuve Saint-Laurent. Rapport soumis au Comité d'étude sur le fleuve Saint-Laurent par le Ministère du Tourisme, de la Chasse et de la Pêche, Rapp. tech. 3, 436 p.Pesca. 1997. Étude de conservation et de mise en valeur de la Pointe Verte, Maria. Rapport préliminaire présenté au ministère des Pêches et des Océans. 86p.Société de la Faune et des Parcs du Québec. 2000. Atlas des habitats critiques connus ou d'intérêt particulier pour les poissons du fleuve Saint-Laurent entre le port de Montréal et l'Île aux Coudres. Direction du développement de la faune.

Production of a layer that includes the known information on seaweed medium to high density areas in the Chaleur Bay, the Estuary and the Gulf of St. Lawrence according to a literature review of documents produced between 1995 and 1999.Additional InformationSeaweed density areas were produced according to a literature review of the following documents:Mariculture de Percé inc. 1995. Essai d'augmentation de la biomasse du homard "Récifs artificiels", Rapport no 95, Programme d'essai et d'expérimentation halieutiques et aquicoles.Lemieux, C. 1995. Acquisition de connaissances des habitats côtiers dans la région de Rimouski (1995). Rapport du Groupe-Conseil GENIVAR présenté au Ministère des Pêches et des Océans du Canada, Division de la Gestion de l’Habitat du Poisson, 52 pages + 2 annexes.Belzile, L., Lalumière, R., Cloutier, O. et J.F. Martel. 1997. Inventaire des laminaires dans la Baie des Chaleurs entre Miguasha et Bonaventure. Rapport conjoint Groupe-conseil Génivar inc. et Regroupement des pêcheurs professionnels du sud de la Gaspésie pour le compte de Pêches et Océans Canada, Québec. 13 pagesVaillancourt, M.-A. et C. Lafontaine. 1999. Caractérisation de la Baie Mitis. Jardins de Métis et Pêches et Océans Canada. Grand-Métis. 185 p.Calderón, I. 1996. Caractérisation de la végétation et de la faune ichtyenne de la baie de Sept-Îles. Document réalisé par la Corporation de protection de l'environnement de Sept-Îles pour Pêches et Océans Canada. 26p. + 5 annexes.Calderón, I. 1996. Caractérisation des habitats du poisson de la baie de Sept-Îles - Phase II. Corporation de protection de l'environnement de Sept-Îles. 37 pages.

Layer that includes the known information on the american shad breeding areas in the St. Lawrence River and Estuary according to a literature review of documents produced between 1976 and 1997.Additional InformationAmerican shad's breeding areas were produced according to a literature review of the following documents:Blais, J.-P. et V. Legendre. 1976. La ouananiche, Salmo salar, du lac Tremblant, Québec. Québec, Ministère du Loisir, de la Chasse et de la Pêche, Direction régionale de Montréal, Rapp. tech. 06-11, 116 p.Boulet, M., J. Leclerc et P. Dumont. 1995. Programme triennal d'étude sur le suceur cuivré. Québec, Ministère de l'Environnement et de la Faune, Service de l'aménagement et de l'exploitation de la faune, Montréal, Rapp. d'étape, 61 p.Boulet, M., Y. Chagnon et J. Leclerc. 1996. Recherche et caractérisation des aires de fraye des suceurs cuivré et ballot au bief d'aval du barrage de Saint-Ours (rivière Richelieu) en 1992. Québec, Ministère de l'Environnement et de la Faune, Service de l'aménagement et de l'exploitation de la faune, Longueuil, Rapp. trav. 06-38, xi + 37 p.Dumont, P. et R. Fortin. 1977. Relations entre les niveaux d'eau printaniers et la reproduction du Grand Brochet du Haut-Richelieu et de la baie Missisquoi. Université du Québec à Montréal, Département des sciences biologiques, pour le Bureau international Champlain Richelieu, Comité d'impact sur l'environnement, x + 108 p.Dumont, P. et S. Desjardins. 1989. Lettre adressée à M. André Poulin du Département de géographie, Université de Sherbrooke, au sujet de la faune et les habitats de la portion aval de la rivière aux Brochets. Québec, Ministère du Loisir, de la Chasse et de la Pêche, Direction régionale de Montréal. Dumont, P., J. Leclerc et L. Bouthillier. 1989a. Données d'inventaire, baie Brazeau, rivière des Outaouais, été 1989. Québec, Ministère du Loisir, de la Chasse et de la Pêche, Service de l'aménagement et de l'exploitation de la faune, Montréal. [Données non publiées].Environnement Illimité inc. 1994. Centrale Les Cèdres - Nouvel aménagement. Avant-projet phase 2, études environnementales. Description du milieu biologique. Volumes 1 et 2. Rapport préparé pour la Vice-Présidence Environnement Hydro-Québec, Service production, réfection et localisation, 241 p. + annexes.Fournier, P. et L.-M. Soyez. 1988. Étude de l'utilisation faunique printanière du marais de Rosemère. Québec, Ministre du Loisir, de la Chasse et de la Pêche, Service de l'aménagement et de l'exploitation de la faune, Montréal, 13 p.Gagnon, M., Y. Ménard et J.-F. La Rue. 1993. Caractérisation et évaluation des habitats du poisson dans la zone de transition saline du Saint-Laurent. Rapp. tech. can. sci. halieut. aquat. 1920: viii + 104 p.Gendron, M. 1986. Rivière-des-Prairies. Aménagement d'un haut-fond, printemps 1986. Groupe de recherche SEEEQ ltée pour la Direction Environnement d'Hydro-Québec, 103 p.Gendron, M. 1987. Rivière-des-Prairies. Suivi de l'aménagement d'un haut-fond, printemps 1987. Le Groupe de recherche SEEEQ ltée pour la Direction Environnement d'Hydro-Québec, 60 p.Gendron, M. 1988. Rivière-des-Prairies. Suivi de l'aménagement du haut-fond, synthèse 1982-1988. Le Groupe de recherche SEEEQ ltée pour le Service de recherche en environnement et santé publique, Vice-Présidence Environnement, Hydro-Québec, 95 p.Guay, G. et M. Couillard. 1985. Étude de l'utilisation printannière et autonmale des rapides de Lachine par les poissons. Environnement Illimité inc. pour le Secrétariat Archipel, 167 pages + annexes.Laramée, P. 1983. La vie printanière dans les rapides de Lachine : Reproduction des poissons. Éco-Recherches inc. pour Vice-Présidence Environnement Hydro-Québec et le Secrétariat Archipel, 30 p. + 7 annexes. Leclerc, J. 1983. La montaison de l'Alose savoureuse dans la rivière des Mille Iles en 1983. Rapport réalisé par Bio-Conseil inc. pour le compte du Service des études hydrauliques et écologiques, Ministère de l'Environnement du Québec, 45 p.Letendre, M., B. Dumas et M. Beaudoin. 1990. Inventaire de la rivière des Prairies, au niveau de l'île de Pierre. Québec, Ministère du Loisir de la Chasse et de la Pêche, Service de l'aménagement et de l'exploitation de la faune, Montréal. [Travaux en cours].Provost, J., L. Verret et P. Dumont. 1984. L'Alose savoureuse au Québec : synthèse des connaissances biologiques et perspectives d'aménagement d'habitats. Canada, Ministère des Pêches et Océans, Direction de la recherche sur les pêches, Laboratoire de Québec, Rapport manuscrit canadien des sciences halieutiques et aquatiques no 1793, xi + 114 p.Thérrien, J., H. Marquis, G Shooner et P. Bérubé.1991. Caractérisation des habitats recherchés pour la fraie des principales espèces de poisson du fleuve Saint-Laurent (Cornwall à Montmagny). Étude réalisée pas le Groupe Environnement Shooner inc. Pour le compte du Ministère des Pêches et des Océans du Canada. 16 p.