This model is derived from geological, geophysical and other forms of geodata. Feature extraction used deep learning. Predictive modelling made use of the deep ensemble method. Displayed is a Pan-Canadian probability map of mineral potential of graphite. This map was generated using known graphite deposits and occurrences and their associated features. Higher probability values highlight areas with an increased probability of graphite mineral systems.

This polygon layer reflects short-range (up to 84 hours) accumulated precipitation forecasts from the Regional Deterministic Prediction System (RDPS), a high-resolution (~10 km) weather model developed by Environment and Climate Change Canada (ECCC). It supports flood forecasting, hydrological modeling, and operational planning by providing refined, near-real-time precipitation guidance for Canada and surrounding areas.Short-Range Forecasts: RDPS runs multiple times per day, offering precipitation outlooks for days 0–3.5 with updates every six hours. High Resolution: At ~10 km, RDPS captures critical mesoscale phenomena like localized downpours, lake-effect snow, and terrain-driven precipitation. Hydrological Utility: Especially valuable for sub-basin-level flood risk assessment and water resource management in near-term scenarios. Technical Basis: The RDPS is a limited-area configuration of the GEM model, using initial/boundary conditions from ECCC’s Global Deterministic Prediction System (GDPS).

In permafrost dominated regions, a gap persists in our understanding of water resources, the influence of groundwater, and the impact of climate change at the regional scale. Regional scale modelling can help to advance the understanding of these impacts by integrating with regional climate models. For regional modelling to be tenable, ongoing development of modelling methods and conceptualizations is required. By developing a fully integrated numerical groundwater-surface water climate model using HydroGeoSphere (HGS) (Aquanty 2021) for a gauged basin within the discontinuous permafrost zone, this dataset allows the verification of existing numerical methods and the testing of various conceptualizations of integrated groundwater-surface water flow in permafrost regions at the regional scale. This work informs future modelling and forecasting of regional water resources in permafrost regimes.

Broad Ecosystem Units were mapped using predictive modeling methods from various data sources (ranging from 1:50,000 to 1:250,000 in scale) and are referenced to the CanVec digital spatial framework (1:50,000). Broad Ecosystem Units (BEU) are a level in the Yukon bioclimate ecosystem classification system that represents areas with similar broad vegetation communities, terrain type (soils and topography) within bioclimate zones. Broad Ecosystem Units are described in the accompanying report "Regional Ecosystems of West-Central Yukon, Part 1: Ecosystem descriptions ".The intended application for mapped broad ecosystem units is 1:100,000 or smaller (1:100,000 - 1:250,000 scale) - interpretations derived from the map products should not be applied at more detailed scales, even though the resultant 30m raster map allows users to view results at more detailed resolutions. With new information, boundaries and designations of Broad Ecosystem Units can change. Updates to Broad Ecosystem Units occur only periodically. For the most current information, or if you have questions, please contact the Ecological and Landscape Classification Program (ELC@yukon.ca).Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

STE_TEI_ATTRIBUTE_POLYS_SP contains Terrestrial Ecosystem Information (TEI) polygons with key and amalgamated (concatenated) attributes derived from the RISC (Resource Inventory Standards Committee) standard attributes. These describe the physical and biological characteristics of ecosystems at a landscape level. TEI currently includes Terrestrial Ecosystem Mapping (TEM), Predictive Ecosystem Mapping (PEM), Sensitive Ecosystems Inventory (SEI), Terrain Mapping (TER), Wetland Mapping (WET) and Soil Mapping (SOIL). Mapping methods include manual air photo interpretation and modeling supported by limited field checking. **Current version**: v12 (2026-06-22)

Leaf area index (LAI) quantified the density of vegetation irrespective of land cover. LAI quantifies the total foliage surface area per groud surface area. LAI has been identified by the Global Climate Observing System as an essential climate variable required for ecosystem,weather and climate modelling and monitoring. This product consists of annual maps of the maximum LAI during a grownig season (June-July-August) at 100m resolution covering Canada's land mass.

This dataset is not currently available in the BCGW but may be downloaded in geodatabase format. Please refer to: [Terrestrial Ecosystem Information (TEI) Data Distribution Packages](http://catalogue.data.gov.bc.ca/dataset/terrestrial-ecosystem-information-tei-data-distribution-packages) PEM_Polygons contains Predictive Ecosystem Mapping polygons with key and amalgamated (concatenated) attributes derived from the RISC (Resource Inventory Standards Committee) standard attributes. PEM uses modeling to divide the landscape into units according to a variety of ecological features including climate, physiography, surficial material, bedrock geology, soils and vegetation. This layer is derived from the STE_TEI_ATTRIBUTE_POLYS_SP layer by filtering on the PROJECT_TYPE attribute. COMMENTS - this spatial view replaces the older STE_PEM_SHORT_TABLE_SP.

This dataset is a locational record of the meteorological input files publically available on Saskatchewan GeoHub that can be used with the Environmental Protection Agency approved Regulatory Model (AERMOD). Each file represents the meteorology over an area of the province while minimizing the influences of local terrain on air flow. Additional attribute information for each location includes coordinates and a link to download the AERMOD data as a zip file.The Air Quality Section of the Ministry of Environment uses air quality modelling to simulate how air pollutants disperse in the ambient atmosphere in order to help manage the air quality in the province. The models are used to estimate the impact of air pollutants emitted from emission sources, and are typically employed to determine whether existing or new proposed industrial facilities are or will be in compliance with the ambient air quality standards outlined in Table 20 of the province's Environmental Code, June 1, 2015 under The Environmental Management and Protection Act, 2010.  The information needed to run dispersion models consists primarily of emissions and meteorological data. Five years (2012-2016) of preprocessed meteorological datasets in an AERMOD ready format is publicly available. This file is contained in the downloadable zipped file. The zipped file contains five files: the SFC and PFL files are the AERMOD ready files required to run AERMOD (i.e., data, sensible heat flux, frictional velocity, potential temperature gradient, vertical velocity, mixing height, monin-obukhov length, surface roughness, Bowen ratio, albedo, scalar wind speed, wind direction, ambient temperature, precipitation, precipitation rate, relative humidity, surface pressure, and total cloud amounts); the DAT file contains the land use information (i.e., Surface roughness, Bowen ratio and albedo) chosen for each month in the SFC file; the KMZ file contains the wind rose for that location which can be used on Google Earth; and the PNG file contains various graphs of monthly or diurnal meteorological distribution (i.e., temperature, wind speed, daytime mixing heights and sensible heat flux, and stability) which can be used to help determine if that location is representative of the area proposed for modelling.  Please note: Since this data is newly developed, it is possible there may be issues with the data as it gets used in more applications. Ongoing changes, edits and updates may be made by the Air Quality Section of the Ministry of Environment. Is is recommended for any future modelling to download the latest version of the input files and not archive any input files on your own server for future use, unless this notification no longer exists. If there are any issues discovered with data in the zipped file, please contact Dennis Fudge at dennis.fudge@gov.sk.ca or at 306-519-7105. Your support will be greatly appreciated.  There may be times you feel that the input files are not representative of the proposed modelling domain due to the surrounding features (i.e., forest/agricultural or rural/urban) being different than those used to generate the input files. If that is the case, the modeler can generate the input modelling files themselves. The relevant files to generate these input files are available upon request. Please contact Dennis Fudge at dennis.fudge@gov.sk.ca or at 306-519-7105. 

This deep water substrate bottom type model was created to aid in habitat modeling, and to complement the nearshore bottom patches. It was created from a combination of bathymetrically-derived layers in addition to bottom type observations. Using random forest classification, the relationship between observed substrates and bathymetric derivatives was estimated across the entire area of interest. The raster is categorized into: 1) Rock, 2) Mixed, 3) Sand, 4) Mud

Statistics Canada, in collaboration with the Public Health Agency of Canada and Natural Resources Canada, is presenting selected Census data to help inform Canadians on the public health risk of the COVID-19 pandemic and to be used for modelling analysis.The data provided here show the population counts and percentage distribution for various geographic levels by broad age groups, males, females and both sexes, from the 2016 Census.