This polygon layer reflects short-range (up to 84 hours) accumulated precipitation forecasts from the Regional Deterministic Prediction System (RDPS), a high-resolution (~10 km) weather model developed by Environment and Climate Change Canada (ECCC). It supports flood forecasting, hydrological modeling, and operational planning by providing refined, near-real-time precipitation guidance for Canada and surrounding areas.Short-Range Forecasts: RDPS runs multiple times per day, offering precipitation outlooks for days 0–3.5 with updates every six hours. High Resolution: At ~10 km, RDPS captures critical mesoscale phenomena like localized downpours, lake-effect snow, and terrain-driven precipitation. Hydrological Utility: Especially valuable for sub-basin-level flood risk assessment and water resource management in near-term scenarios. Technical Basis: The RDPS is a limited-area configuration of the GEM model, using initial/boundary conditions from ECCC’s Global Deterministic Prediction System (GDPS).

Dominant Species Map 2015The data represent dominant tree species for British Columbia forests in 2015, are based upon Landsat data and modeling, with results mapped at 30 m spatial resolution. It is developed within the framework of Canada’s National Terrestrial Ecosystem Monitoring System (NTEMS). The map was generated with the Random Forests classifier that used predictor variables derived from Landsat time series including surface reflectance, land cover, forest disturbance, and forest structure, and ancillary variables describing the topography and position. Training and validation samples were derived from the Vegetation Resources Inventory (VRI), from a pool of polygons with homogeneous internal conditions and with low discrepancies with the remotely sensed predictions. Local models were applied over 100x100 km tiles that considered training samples from the 5x5 neighbouring tiles to avoid edge effects. An overall accuracy of 72% was found for the species which occupy 80% of the forested areas. Satellite data and modeling have demonstrated the capacity for up-to-date, wall-to-wall, forest attribute maps at sub-stand level for British Columbia, Canada.BC Species Likelihood 2015The tree species class membership likelihood distribution data included in this product focused on the province of British Columbia, based upon Landsat data and modeling, with results mapped at 30 m spatial resolution. The data represent tree species class membership likelihood in 2015. The map was generated with the Random Forests classifier that used predictor variables derived from Landsat time series including surface reflectance, land cover, forest disturbance, and forest structure, and ancillary variables describing the topography and position. Training and validation samples were derived from the Vegetation Resources Inventory (VRI) selecting from a stratified pool of polygons with homogeneous internal conditions and with low discrepancies when related to remotely sensed information. Local models were applied over 100x100 km tiles that, to avoid edge effects, considered training samples from the 5x5 neighbouring tiles. An overall accuracy of 72% was found for the species which occupy 80% of the forested areas. As an element of the mapping process, we also obtain the votes received for each class by the Random Forest models. The votes can be understood as analogous to class membership likelihoods, providing enriched information on land cover class uncertainty for use in modeling. Tree species class membership likelihoods lower than 5% have been masked and converted to zero.When using this data, please cite as: Shang, C., Coops, N.C., Wulder, M.A., White, J.C., Hermosilla, T., 2020. Update and spatial extension of strategic forest inventories using time series remote sensing and modeling. International Journal of Applied Earth Observation and Geoinformation 84, 101956. DOI: 10.1016/j.jag.2019.101956 ( Shang et al. 2020).

This deep water substrate bottom type model was created to aid in habitat modeling, and to complement the nearshore bottom patches. It was created from a combination of bathymetrically-derived layers in addition to bottom type observations. Using random forest classification, the relationship between observed substrates and bathymetric derivatives was estimated across the entire area of interest. The raster is categorized into: 1) Rock, 2) Mixed, 3) Sand, 4) Mud

Landscape Units (Subdivisions) were developed as a part of the 2002 Northern Caribou Strategy and are used for landscape level planning within Wildlife Habitat Area 5-086. For details please see: [Apps, C. D., T. A. Kinley, and J. A. Young. 2001. Multi-scale habitat modeling for woodland caribou in the Itcha, Ilgachuz, and Rainbow mountains of west-central British Columbia. Wildlife Section, Ministry of Water, Land and Air Protection, Williams Lake, British Columbia, Canada.](http://www.env.gov.bc.ca/cariboo/env_stewardship/wildlife/inventory/caribou/northcar/hmi/hsi06-01.pdf)

Summer/Fall and Winter/Forest-Dwelling 2017 habitat model for caribou in the Itcha Ilgachuz area. [Season] field should be used to split the data out into separate summer/fall and winter/forest-dwelling habitat models. Model development is detailed in _Apps, C., and N. Dodd. 2016.. Caribou habitat modeling and evaluation of forest disturbance influences across landscape scales in west-central British Columbia – March, 2016. Prepared for Ministry of Forests, Lands and Natural Resource Operations, Williams Lake, British Columbia_. See also: https://catalogue.data.gov.bc.ca/dataset/7ea6556b-c113-4194-92f2-7ddb55a340b6 __Note: The 2001 habitat model covers a similar area, but is not replaced by the 2017 habitat model.__

Marine classification schemes based on abiotic surrogates often inform regional marine conservation planning in lieu of detailed biological data. However, theses chemes may poorly represent ecologically relevant biological patterns required for effective design and management strategies. We used a community-level modeling approach to characterize and delineate representative mesoscale (tens to thousands of kilometers) assemblages of demersal fish and benthic invertebrates in the North-west Atlantic. Hierarchical clustering of species occurrence data from four regional annual multispecies trawl surveys revealed three to six groupings (predominant assemblage types) in each survey region, broadly associated with geomorphic and oceanographic features. Indicator analyses identified 3–34 emblematic taxa of each assemblage type. Random forest classifications accurately predicted assemblage dis-tributions from environmental covariates (AUC > 0.95) and identified thermal limits (annual minimum and maximum bottom temperatures) as important pre-dictors of distribution in each region. Using forecasted oceanographic conditions for the year 2075 and a regional classification model, we projected assemblage dis-tributions in the southernmost bioregion (Scotian Shelf-Bay of Fundy) under ahigh emissions climate scenario (RCP 8.5). Range expansions to the north eastare projected for assemblages associated with warmer and shallower waters of the Western Scotian Shelf over the 21st century as thermal habitat on the rela-tively cooler Eastern Scotian Shelf becomes more favorable. Community-level modeling provides a biotic-informed approach for identifying broadscale ecolog-ical structure required for the design and management of ecologically coherent, representative, well-connected networks of Marine Protected Areas. When com-bined with oceanographic forecasts, this modeling approach provides a spatial tool for assessing sensitivity and resilience to climate change, which can improve conservation planning, monitoring, and adaptive management.Cite this data as: O'Brien, J.M., Stanley, R.R.E., Jeffery, N.W., Heaslip, S.W., DiBacco, C., and Wang, Z. Demersal fish and benthic invertebrate assemblages in the Northwest Atlantic.Published: December 2024. Coastal Ecosystems Science Division, Maritimes region, Fisheries and Oceans Canada, Dartmouth NS.https://open.canada.ca/data/en/dataset/14d55ea5-b17d-478c-b9ee-6a7c04439d2b

Level curves with an equidistance of 1 m derived from a lidar survey conducted in 2024.attributes:ID - Unique IDSubtype - Master (1) or secondary (2) level curve SCORE - Elevation value (m) The High Resolution Digital Elevation Model (m) product The High Resolution Digital Elevation Model (HRDM) product is available on the Open Government website.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

Summer, Spring, Early Winter, and Late Winter multi-scale habitat model for mountain caribou in the Western Cariboo Region / Columbia Highlands / Northern Columbia Mountains. [Season] field should be used to split the data out into separate summer, spring, early winter, and late winter habitat models. [Model development is detailed in _Apps, C. D. and T. A. Kinley. 2000. Multiscale Habitat Modeling for Mountain Caribou in the Columbia Highlands and Northern Columbia Mountains Ecoregions, British Columbia.Wildlife Section, Ministry of Water, Land and Air Protection, Williams Lake, British Columbia, Canada](http://www.env.gov.bc.ca/cariboo/env_stewardship/wildlife/inventory/caribou/mtncar/hmi/habitatmod04-00.pdf).

Landsat-derived forest age for Canada 2022Satellite-based forest age map for 2022 across Canada's forested ecozones at a 30-m spatial resolution. It is developed within the framework of Canada’s National Terrestrial Ecosystem Monitoring System (NTEMS). Remotely sensed data from Landsat (disturbances, surface reflectance composites, forest structure) and MODIS (Gross Primary Production) are utilized to determine age. Age can be determined where disturbance can be identified directly (disturbance approach) or inferred using spectral information (recovery approach) or using inverted allometric equations to model age where there is no evidence of disturbance (allometric approach). The disturbance approach is based upon satellite data and mapped changes and is the most accurate. The recovery approach also avails upon satellite data plus logic regarding forest succession, with an accuracy that is greater than pure modeling. Given the lack of widespread recent disturbance over Canada's forests, the allometric approach is required over the greatest area (86.6%). Using information regarding realized heights and growth and yield modeling, ages are estimated where none are otherwise possible. Trees of all ages are mapped, with trees >150 years old combined in an - old tree - category.See Maltman et al. (2023) for an overview of the methods, data, image processing, as well as information on agreement assessment using Canada's National Inventory (NFI). Maltman, J.C., Hermosilla, T., Wulder, M.A., Coops, N.C., White, J.C., 2023. Estimating and mapping forest age across Canada's forested ecosystems. Remote Sensing of Environment 290, 113529. ( Maltman et al. 2023).

Inventory of building footprints in the City of Rouyn-Noranda.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**