Quaternary geology includes information relating to heavy mineral samples, morpho-sedimentological zones, surface morphology, erratic boulders, glacial erosion marks, and observation sites.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

The National Ecological Framework for Canada's "Surface Form by Ecozone" dataset contains tables that provide surface form information for components within the ecozone framework polygon. It provides surface form codes and their English and French-language descriptions as well as information about the percentage of the polygon that the component occupies. Surface form descriptions describe assemblages of slopes or recurring patterns of forms that occur at the earth's surface. When applied to consolidated materials (material that has been transformed to hard rock), it refers to the form produced after modification by geological processes. The mineral soil surface forms are: dissected; hummocky (irregular); inclined; level, rolling; ridged; steep; terraced; undulating. The wetland surface forms are: bog; fen; marsh; swamp.

The National Ecological Framework for Canada's "Surface Form by Ecoprovince" dataset contains tables that provide surface form information for components within the ecoprovince framework polygon. It provides surface form codes and their English and French-language descriptions as well as information about the percentage of the polygon that the component occupies. Surface form descriptions describe assemblages of slopes or recurring patterns of forms that occur at the earth's surface. When applied to consolidated materials (material that has been transformed to hard rock), it refers to the form produced after modification by geological processes. The mineral soil surface forms are: dissected; hummocky (irregular); inclined; level, rolling; ridged; steep; terraced; undulating. The wetland surface forms are: bog; fen; marsh; swamp.

The National Ecological Framework for Canada's "Surface Material by Ecoprovince” dataset provides surface material information within the ecoprovince framework polygon. It provides surface material codes and their English and French language descriptions as well as information about the percentage of the polygon that the component occupies. Surface material includes the abiotic material at the earth's surface. The materials can be: ICE and SNOW - Glacial ice and permanent snow ORGANIC SOIL - Contains more than 30% organic matter as measured by weight ROCK - Rock undifferentiated MINERAL SOIL - Predominantly mineral particles: contains less than 30% organic matter as measured by weight URBAN - Urban areas. Note that only a few major urban area polygons are included on SLC source maps, therefore, do not use for tabulating total urban coverage

The National Ecological Framework for Canada's "Surface Form by Ecoregion" dataset contains tables that provide surface form information for components within the ecoregion framework polygon. It provides surface form codes and their English and French-language descriptions as well as information about the percentage of the polygon that the component occupies. Surface form descriptions describe assemblages of slopes or recurring patterns of forms that occur at the earth's surface. When applied to consolidated materials (material that has been transformed to hard rock), it refers to the form produced after modification by geological processes. The mineral soil surface forms are: dissected; hummocky (irregular); inclined; level, rolling; ridged; steep; terraced; undulating. The wetland surface forms are: bog; fen; marsh; swamp.

The National Ecological Framework for Canada's "Surface Form by Ecodistrict" dataset contains tables that provide surface form information for components within the ecodistrict framework polygon. It provides surface form codes and their English and French-language descriptions as well as information about the percentage of the polygon that the component occupies. Surface form descriptions describe assemblages of slopes or recurring patterns of forms that occur at the earth's surface. When applied to consolidated materials (material that has been transformed to hard rock), it refers to the form produced after modification by geological processes. The mineral soil surface forms are: dissected; hummocky (irregular); inclined; level, rolling; ridged; steep; terraced; undulating. The wetland surface forms are: bog; fen; marsh; swamp.

The National Ecological Framework for Canada's "Surface Material by Ecodistrict” dataset provides surface material information within the ecodistrict framework polygon. It provides surface material codes and their English and French language descriptions as well as information about the percentage of the polygon that the component occupies. Surface material includes the abiotic material at the earth's surface. The materials can be: ICE and SNOW - Glacial ice and permanent snow ORGANIC SOIL - Contains more than 30% organic matter as measured by weight ROCK - Rock undifferentiated MINERAL SOIL - Predominantly mineral particles: contains less than 30% organic matter as measured by weight URBAN - Urban areas. Note that only a few major urban area polygons are included on SLC source maps, therefore, do not use for tabulating total urban coverage.

Level below which soil or rock is saturated with water, in the well and at the time the level has been measured, expressed in m above the sea level. Groundwater levels measured are interpolated / extrapolated to obtain groundwater level on every cell of the hydrogeological unit raster. Surfer and ArcGis are the software usually used to create groundwater level raster. The dataset designates a raster with a groundwater level, for each cell of the hydrogeological unit.

Identification of a potential spawning site for lumpfish during an ichtyofauna inventory conducted in the eelgrass in Sept-Îles bay by Calderón (1996).Purpose:The 1996 document by par Isabel Calderón has been achieved by the "Corporation de protection de l'environnement de Sept-Îles" with the support of Department of Fisheries and Oceans (DFO) as part of the "Biodiversity" program, St. Lawrence Vision 2000 (Canada).Source:Calderón, I. 1996. Caractérisation des habitats du poisson de la baie de Sept-Îles - Phase II. Corporation de protection de l'environnement de Sept-Îles. 37 pages.

The dataset represents known concentration areas of harvested or unharvested Softshell clam (Mya arenaria) in the intertidal zone of the Estuary and the Gulf of St. Lawrence, Quebec region. The dataset was created for the National environmental emergencies centre (NEEC) for preparation and response in case of an oil spill. Concentration areas were defined using Fisheries and Oceans Canada (DFO) inventories conducted between 2000 and 2020.This layer is dependent on the inventories carried out and thus only represents known clam areas. For example, for the Haute-Côte-Nord, inventories have been limited to areas open to harvesting (with the exception of 4 sectors), but it is known that the Softshell clam is also present outside these areas. In addition, little information was available for the Moyenne and Basse-Côte-Nord.This data layer does not represent the general distribution of the species nor the extent to which fishing is allowed. The extent of shellfish beds may vary over time in response to, among others harvesting and the recruitment rates. The boundaries of polygons from inventory data may be underestimated relative to the actual size of the deposit since the inventories were conducted at the location where the resource is most abundant, without necessarily sampling the entire bed. However, the accuracy is sufficient for the protection and management needs of the resource in the event of an environmental incident. Data sources and references:Brulotte, S. 2011. Évaluation des stocks de mye commune des eaux côtières du Québec. Secr. can. de consult. sci. du MPO. Doc. de rech. 2011/044. x + 53 p.Brulotte, S. 2018. Évaluation de la mye commune (Mya arenaria) des eaux côtières du Québec en 2016 – méthodologie et résultats. Secr. can. de consult. sci. du MPO. Doc. de rech. 2018/004. ix + 60 p.Brulotte, S. 2020. Évaluation des stocks de la mye commune (Mya arenaria) des eaux côtières du Québec en 2019 – méthodologie et résultats. Secr. can. de consult. sci. du MPO. Doc. de rech. 2020/055. vii + 43 p.Brulotte, S. 2022. Résultats des inventaires de gisements de mye commune (Mya arenaria) réalisés de 2016 à 2020 et mise à jour des résultats de ceux effectués de 2001 à 2014 au Québec. Secr. can. de consult. sci. du MPO. Doc. de rech. 2022/xxx. (in progress)Brulotte, S. and M. Giguère. 2003. Évaluation d'un gisement de mye commune (Mya arenaria) de l'embouchure de la rivière Mingan, Québec, Rapp. can. ind. sci. halieut. aquat. No. 2511: xi + 58.Brulotte, S., M. Giguère, S. Brillon and F. Bourque. 2006. Évaluation de cinq gisements de mye commune (Mya arenaria) aux Îles-de-la-Madeleine, Québec, de 2000 à 2003. Rapp. tech. can. sci. halieut. aquat. 2640 : xii + 92 p.Brulotte, S., Giguère, M. and Duluc, C. 2015. Essais de techniques de captage du naissain de mye commune (Mya arenaria) sur la rive nord de l’estuaire et du golfe du Saint-Laurent. Rapp. tech. can. sci. halieut. aquat. 3084 : ix + 60 p.Giguère, M., S. Brulotte and F. Hartog.2007. Évaluation de quelques gisements de mye commune (Mya arenaria) de la rive sud de l'estuaire du Saint-Laurent en 2005 et 2006. Rapp. can. ind. sci. halieut. aquat. No. 2738: xi + 107.Giguère, M., S. Brulotte, M. Boudreau and M.-F. Dréan. 2008. Évaluation de huit gisements de mye commune (Mya arenaria) de la rive nord de l’estuaire du Saint-Laurent de 2002 à 2008. Rapp. tech. can. sci. halieut. aquat. 2821 : x + 91 p.Roy, I., M. Giguère, S. Brulotte and M. Gagnon. 2003. Évaluation de douze gisements de mye commune (Mya arenaria) du sud de la Gaspésie, Rapp. Tech. can. sci. halieut. aquat. 2469: xvi + 140 p.