This layer represents the Harp seal (Pagophilus groenlandicus) distribution. During the summer, the Harp seal is in Arctic and it migrates south of its distribution range during the fall. It migrates back to the Arctic after the moulting period which occurs in April and May.Reference:DFO. 2020. 2019 Status of Northwest Atlantic Harp Seals, Pagophilus groenlandicus. DFO Can. Sci. Advis. Sec. Sci. Advis. Rep. 2020/020.

Distribution of diving duck species habitat in coastal British Columbia showing relative abundance (RA) by season and overall relative importance (RI). RI is based on project region and not on the province as a whole. CRIMS is a legacy dataset of BC coastal resource data that was acquired in a systematic and synoptic manner from 1979 and was intermittently updated throughout the years. Resource information was collected in nine study areas using a peer-reviewed provincial Resource Information Standards Committee consisting of DFO Fishery Officers, First Nations, and other subject matter experts. There are currently no plans to update this legacy data.

Planting activities reported on openings into RESULTS. More than one planting activitiy may occur within an opening. Planting activiites may also overlap. Planting attribute reporting is mandatory requirement while planting maps are optional. Planting reports includes species and seedlot information. This is a part of Silviculture and Land Status dataset, which includes tracking achievement of silviculture obligations on Crown land

The lobster recruitment project is run by the Fishermen and Scientist Research Society (FSRS) through DFO funding. Fishermen participating in the lobster recruitment project collect information about lobster in their fishing area by fishing 2-5 scientific project traps (SPTs) (fished in fixed locations) within the regular commercial season. The SPTs used in all fishing areas are smaller than commercial traps and designed to primarily catch juvenile lobsters below the legal-size limit.These traps are additional to the vessel's legal number of commercial traps. The lobster recruitment project has more than 120 fishers participating from all LFAs along the Atlantic coast of Nova Scotia from LFA 27 in Cape Breton to LFA 35 in the Bay of Fundy (excluding LFA 28, who have not participated to-date).The number of fishermen per LFA and number of SPTs per fisherman are decided on by the LFA Advisory Committees. This decision considers how much additional effort they were comfortable having in the LFA (i.e. number of SPTs) and from how many traps each fisher could be reasonably expected to collect data. It is also important to have fishers dispersed enough to maximize study footprint. DFO Science consults on project design. SAMPLING METHODS: The fishers record the number, sex and length of lobsters captured in each SPT, as well as presence of eggs, tags or v-notch. Bottom temperatures are monitored by placing a temperature recorder in one of their SPTs for the entire lobster season.Cite this data as: Tibbets-Scott, S., Zisserson, B. Data of: Fishermen and Scientist Research Society (FSRS) Lobster Recruitment Trap Project. Published: November 2020. Population Ecology Division, Fisheries and Oceans Canada, Dartmouth, N.S. https://open.canada.ca/data/en/dataset/a88f9b4d-b59a-44f6-ae7e-d36550266940

Catch, effort, location (latitude, longitude), relative abundance indices, and associated biological data from groundfish multi-species bottom trawl surveys in West Coast Haida Gwaii.Introduction The West Coast Haida Gwaii (WCHG) synoptic bottom trawl survey was first conducted annually from 2006 to 2008 and has since been repeated every second year on even numbered years. The survey was not impacted by the COVID-19 pandemic. This survey is one of a set of long-term and coordinated surveys that together cover the continental shelf and upper slope of most of the British Columbia coast. The other surveys are the Queen Charlotte Sound (QCS) survey, the Hecate Strait (HS) survey, the West Coast Vancouver Island (WCVI) survey, and the Strait of Georgia (SOG) survey. The objectives of these surveys are to provide fishery independent abundance indices of all demersal fish species available to bottom trawling and to collect biological samples of selected species. The survey follows a random depth-stratified design and the sampling units are 2 km by 2 km blocks. The synoptic bottom trawl surveys are conducted by Fisheries and Oceans Canada (DFO) in collaboration with the Canadian Groundfish Research and Conservation Society (CGRCS), a non-profit society composed of participants in the British Columbia commercial groundfish trawl fishery. The Queen Charlotte Sound and West Coast Haida Gwaii surveys are conducted under collaborative agreements, with the CGRCS providing chartered commercial fishing vessels and field technicians, while DFO provides in-kind contributions for running the surveys including personnel and equipment. The Hecate Strait, West Coast Vancouver Island, and Strait of Georgia surveys are conducted by DFO and have typically taken place on a Canadian Coast Guard research vessel. Until 2016 this vessel was the CCGS W.E. Ricker. From 2021 onwards, this vessel was the CCGS Sir John Franklin. In years when a coast guard vessel has not been available, the Hecate Strait, West Coast Vancouver Island, and Strait of Georgia surveys have taken place on chartered industry vessels. Data from these surveys are also presented in the groundfish data synopsis report (Anderson et al. 2019).EffortThis table contains information about the survey trips and fishing events (trawl tows/sets) that are part of this survey series. Trip-level information includes the year the survey took place, a unique trip identifier, the vessel that conducted the survey, and the trip start and end dates (the dates the vessel was away from the dock conducting the survey). Set-level information includes the date, time, location, and depth that fishing took place, as well as information that can be used to calculate fishing effort (duration) and swept area. All successful fishing events are included, regardless of what was caught.CatchThis table contains the catch information from successful fishing events. Catches are identified to species or to the lowest taxonomic level possible. Most catches are weighed, but some are too small (“trace” amounts) or too large (e.g. very large Big Skate). The unique trip identifier and set number are included so that catches can be related to the fishing event information (including capture location).BiologyThis table contains the available biological data for catches which were sampled. Data may include any or all of length, sex, weight, age. Different length types are measured depending on the species. Age structures are collected when possible for species where validated aging methods exist and are archived until required for an assessment; therefore, all existing structures have not been aged at this time. The unique trip identifier and set number are included so that samples can be related to the fishing event and catch information.BiomassThis table contains relative biomass indices of species that have been captured in every survey of the time series. The coefficient of variation and bootstrapped 95% confidence intervals are provided for each index. The groundfish data synopsis report (Anderson et al. 2019) provides an explanation of how the relative biomass indices are derived. Note that we do not calculate a biomass index for the 2014 West Coast Haida Gwaii survey, as this survey was incomplete due to operational problems.

"Fall" missions occur primarily in October and November, but sets from September and December are also present in the data. Collected data includes total catch in numbers and weights by species. Length frequency data is available for most species, as are the age, sex, maturity and weight information for a subset of the individual animals. Other data such as ageing material, genetic material, and stomach contents are often also collected, but are stored elsewhere."Fall" cruises occur in September, October, November and December.Cite this data as: Clark, D., Emberley, J. Data of Maritimes Fall Research Vessel Survey. Published January 2021. Population Ecology Division, Fisheries and Oceans Canada, Dartmouth, N.S. https://open.canada.ca/data/en/dataset/5f82b379-c1e5-4a02-b825-f34fc645a529

Coastline segments indicating herring spawing sites along the coastline of British Columbia. Attribute information includes relative importance, spawing frequency and spawn index. CRIMS is a legacy dataset of BC coastal resource data that was acquired in a systematic and synoptic manner from 1979 and was intermittently updated throughout the years. Resource information was collected in nine study areas using a peer-reviewed provincial Resource Information Standards Committee consisting of DFO Fishery Officers, First Nations, and other subject matter experts. There are currently no plans to update this legacy data.

The High Resolution Digital Elevation Model (HRDEM) product is derived from airborne LiDAR data (mainly in the south) and satellite images in the north. The complete coverage of the Canadian territory is gradually being established. It includes a Digital Terrain Model (DTM), a Digital Surface Model (DSM) and other derived data. For DTM datasets, derived data available are slope, aspect, shaded relief, color relief and color shaded relief maps and for DSM datasets, derived data available are shaded relief, color relief and color shaded relief maps.The productive forest line is used to separate the northern and the southern parts of the country. This line is approximate and may change based on requirements. In the southern part of the country (south of the productive forest line), DTM and DSM datasets are generated from airborne LiDAR data. They are offered at a 1 m or 2 m resolution and projected to the UTM NAD83 (CSRS) coordinate system and the corresponding zones. The datasets at a 1 m resolution cover an area of 10 km x 10 km while datasets at a 2 m resolution cover an area of 20 km by 20 km. In the northern part of the country (north of the productive forest line), due to the low density of vegetation and infrastructure, only DSM datasets are generally generated. Most of these datasets have optical digital images as their source data. They are generated at a 2 m resolution using the Polar Stereographic North coordinate system referenced to WGS84 horizontal datum or UTM NAD83 (CSRS) coordinate system. Each dataset covers an area of 50 km by 50 km. For some locations in the north, DSM and DTM datasets can also be generated from airborne LiDAR data. In this case, these products will be generated with the same specifications as those generated from airborne LiDAR in the southern part of the country.The HRDEM product is referenced to the Canadian Geodetic Vertical Datum of 2013 (CGVD2013), which is now the reference standard for heights across Canada.Source data for HRDEM datasets is acquired through multiple projects with different partners. Since data is being acquired by project, there is no integration or edgematching done between projects. The tiles are aligned within each project.The product High Resolution Digital Elevation Model (HRDEM) is part of the CanElevation Series created in support to the National Elevation Data Strategy implemented by NRCan. Collaboration is a key factor to the success of the National Elevation Data Strategy. Refer to the “Supporting Document” section to access the list of the different partners including links to their respective data.

Fecundity of Atlantic herring (Clupea harengus) was estimated within five spawning areas (German Bank, Scots Bay, Seal Island, Southern Shore Nova Scotia, and Eastern Shore Nova Scotia) in Northwest Atlantic Fisheries Organization (NAFO) areas 4WX in 2019 and 2020. The objective of this project was to describe the fecundity-at-size (weight, length, and age) relationships among spawning grounds, compare these relationships to historical fecundity-at-size relationships, and assess the influence of changes in weight-at-age and fecundity over time to the reproductive potential of a unit of spawning stock biomass.Cite this data as: Barrett T. Data of: Fecundity of Herring in Divisions 4WX. Published: September 2021. Population Ecology Division, Fisheries and Oceans Canada, St. Andrews, N.B. https://open.canada.ca/data/en/dataset/e39b1318-c9f7-4686-b5e5-7d838c8ac99a

**ATTENTION! The files in this dataset are designed for streaming, not downloading. For the best experience, please follow the instructions available in the resources.**In replacement of the former Canadian Digital Elevation Model (CDEM) that is no longer supported, the Medium Resolution Digital Elevation Model (MRDEM) product is a multi-source product that integrates elevation data from the Copernicus DEM** acquired during the TanDEM-X Mission (AIRBUS, 2022), and the High Resolution Digital Elevation Model data derived from airborne lidar. This product provides a complete, 30 meters resolution, nationwide coverage for Canada. It includes a Digital Terrain Model (DTM), a Digital Surface Model (DSM) and other derived products. The spatial coverage extends into the USA, where needed, to provide coverage for cross-border watersheds in support of hydrological studies and applications. The MRDEM-30-DSM is partially based on the GLO-30 version of the Copernicus DEM** (hereafter named GLO-30). Since elevation values from the GLO-30 are referenced to the EGM2008 geoid model, they were transformed to the Canadian Height Reference System of 2013 (CGVD2013), using the CGG2013 geoid model. Where available, the MRDEM-30-DSM integrates surface data from the lidar-derived HRDEM mosaic, resampled from 1 m to 30 m. The process to generate the MRDEM-30-DTM is more complex. Where available, the HRDEM Mosaic derived from lidar was used since it already provides reliable terrain elevation values. The HRDEM Mosaic data used was resampled from 1m to 30m. Elsewhere, the processing workflow combines a forest removal model and a settlement removal model that is applied to the GLO-30 values in order to estimate the terrain elevation values. Both datasets are projected to Canada Atlas Lambert NAD83 (CSRS) (EPSG:3979).The MRDEM is referenced to the CGVD2013 which is the reference standard for orthometric heights across Canada.The product Medium Resolution Digital Elevation Model (MRDEM) is part of the CanElevation Series created in support to the National Elevation Data Strategy implemented by NRCan.** This product was in part produced using Copernicus WorldDEM-30 © DLR e.V. 2010-2014 and © Airbus Defence and Space GmbH 2014- 2018 provided under COPERNICUS by the European Union and ESA; all rights reserved.The organisations in charge of the Copernicus program by law or by delegation do not incur any liability for any use of the Copernicus WorldDEM-30.