Ichthyoplankton surveys were conducted in the Strait of Georgia (British Columbia) during 1979-1981 to ascertain the onset of fish spawning, and to explore distributional pattern and estimate total biomass of fish species.Oblique tows were made using 0.25m2 Bongos equipped with 351 micron Nitex nets of modified SCOR design. All sampling gear was black to minimize potential avoidance and resulting catch bias. The tow procedure generally followed that established by CALCOFI.This dataset contains a compilation of corrected catches of juvenile fishes, fish eggs and fish larvae by station.

From August 2nd to September 9th, 2013, Fisheries and Oceans Canada conducted a baseline survey of marine fishes and their habitats on the Canadian Beaufort Shelf and slope. Sampling was conducted from the F/V Frosti at 64 stations along ten transects. Standardized sampling was conducted on the transects at pre-determined depth stations (20-40, 75, 200, 350, 500, 750, and 1000 m) using a variety of sampling equipment including benthic fishing trawls, plankton nets, sediment cores, and CTD and water sample profiles. A specialized CTD probe (UCTD) was deployed at an additional 72 locations while the ship was underway.Presented here is the information on the sampling locations, and the sampling gear deployed at each station.

From August 5th to September 3rd, 2012, Fisheries and Oceans Canada conducted a baseline survey of marine fishes and their habitats on the Canadian Beaufort Shelf and slope. Sampling was conducted from the F/V Frosti at 28 stations along four transects. Standardized sampling was conducted at pre-determined depth stations (20-40, 75, 200, 350, 500, 750, and 1000 m) using a variety of sampling equipment including benthic fishing trawls, plankton nets, sediment cores, and CTD and water sample profiles. A specialized CTD probe (UCTD) was deployed at an additional 30 locations while the ship was underway. Presented here is the information on the sampling locations, and the sampling gear deployed at each station.

This project was completed by the Pelagics Section in the Newfoundland and Labrador Science Branch of Fisheries and Oceans Canada (DFO). As part of the Coastal Environmental Baseline Program, a historical research gillnet program was reinitiated in Placentia Bay. Four local fishers each set fleets of standardized nets to catch herring for 6 weeks during the spring. The data collected was used to update a time series and provide advice at the herring stock assessment in October 2022.  This program was continued in the 22/23 fiscal year. Data collected from this program included gillnet catch rates, bycatch, temperature and biological (herring) samples; from which biological metrics such as length, weight, sex, maturity and age were measured. This record contains catch data for 2018 to 2021, as well as biological data from 2018.

In place since fall 1994, the sentinel fisheries program is the result of a collaboration between Fisheries and Oceans Canada (DFO) and Quebec and Newfoundland commercial fishermen's associations. Under this program, contracts are awarded by tender to fishermen’s associations to carry out fishing activities according to scientific protocols developed by DFO. The main objective of this survey is to collect data that will be used to calculate abundance indices for the northern Gulf of St. Lawrence Atlantic cod stock.Description of fixed gears surveyThe fixed gear sentinel fisheries of the northern Gulf of St. Lawrence are conducted in the sub-division 3Pn and the divisions 4R, 4S of the Northwest Atlantic Fisheries Organization (NAFO) using fixed gillnets or longlines (other fishing gears were also used at the start of the program). Fishing activities with nets must have a mesh size of 5 ½ inches (140mm) and are limited to a maximum of 6 to 20 nets depending on the region and capture and the target immersion time is between 19 to 24 hours. Longline fishing activities, for its part, must be carried out with traditional J #16 or C #12 hooks. The maximum number of hooks varies from 500 to 1000, depending on the catch, and the target immersion time is 4 to 6 hours. Data are collected by observers at sea or by technicians.DataFor each fishing activity, the total catch is sorted and weighed by species. For each species other than Atlantic cod, the number of individuals caught is noted. Atlantic cod are then measured at the fork (cm). Other biological data such as weight (total, gonad, liver and stomach), age, sex and maturity can then be collected on a subsample of cod.The biological data are divided into 4 files: a “Metadata” file containing set information, a “Catches” file containing catches per set for fish taxa, a “Carbio” file containing biological and morphometric measurements per individual, a “Freql” file containing the length frequency of fish.The data collected as part of this program is available below. It is important to note, however, that 1) only traits deemed successful have been retained; 2) historical data may contain inaccuracies; 3) the most recent survey is not available for validation purposes.

Line layer that shows the locations of lockstation gates. (See Gates_Barriers_Portails_Barrieres for other gates and fences).Data is not necessarily complete - updates will occur weekly.

The transport features of the CanVec series are derived from the National Road Network (NRN) and the National Railway Network (NRWN). The dataset describes roads, trails, bridges, railroads and their related information. The transport features include nautical facilities, track segments, track junctions, railway stations, track crossings, track marker posts, track structures, rail ferry segments, road segments, road ferry segments, road junctions, blocked passages, toll points, aerial cableway features, footbridges, trails, navigational aids, marinas and runways.The CanVec multiscale series is available as prepackaged downloadable files and by user-defined extent via a Geospatial data extraction tool.Related Products (Open Maps Links):[Topographic Data of Canada - CanVec Series](https://open.canada.ca/data/en/dataset/8ba2aa2a-7bb9-4448-b4d7-f164409fe056)

Point layer that shows the locations of gates and other barriers (to roads and trails) that are managed by Parks Canada. Data is not necessarily complete - updates will occur weekly.

The Canadian Hydrospatial Network (CHN) is an analysis-ready geospatial network of features that help enable the modelling of surface water flow in Canada. The six main layers and feature types are: flowlines, waterbodies, catchments, catchment aggregates, work units, and hydro nodes. Where possible the CHN is derived from high resolution source data such as Light Detection and Ranging (LiDAR) derived Digital Elevation Models (DEMs) and aerial imagery, to name a few. If existing provincial or territorial hydrographic networks meet the standards, they are incorporated into the CHN, otherwise automatic extraction methods are used on the high-resolution source data. To provide full network connectivity, if neither of these methods is possible in a region, the NHN is converted into the CHN until higher-resolution source data is available.Additional value-added attributes are included in the CHN to aid modelling, such as stream order and reach slope. The CHN physical model and features are also closely aligned and harmonized with the USGS 3DHP hydrographic network, which aids trans-border modelling. Where possible geonames (i.e. toponyms) are also added.The CHN is produced and disseminated by hydrologically connected geographic areas called work units. Work units can contain just one watershed, several small adjacent watersheds outletting into a large body of water, or be one of many parts of a larger watershed. In all cases, the features of a work unit are hydrologically connected. This is a more natural approach to data delivery, in comparison to data that is split into tiles. A generalized work unit index file is provided in the downloads to help users decide which files to download.For more information on the CHN please visit the project webpage: https://natural-resources.canada.ca/canadian-hydrospatial-network

This point layer shows the locations of named places that fall within Parks Canada areas of interest.Data is not necessarily complete - updates will occur weekly.