This dataset contains observations of species occurrences from seafloor imagery collected by the remotely operated underwater vehicle (ROV) during the 2012 Expedition to Cobb Seamount. The ROV operated by Fisheries and Oceans Canada was a customized Deep Ocean Engineering Phantom HD2+2 which collected photographic images from 12 transects ranging from 35 m to 211 m in depth.

This dataset contains observations of species occurrences from seafloor imagery collected by the autonomous underwater vehicle (AUV) during the 2012 Expedition to Cobb Seamount. The National Oceanographic and Atmospheric Administration-operated SeaBED-class AUV which collected photographic images from 4 transects ranging from 436 m to 1154 m in depth.

The Eastern Shore Islands was announced as an "Area of Interest" (AOI) in 2018 by the DFO Maritimes region to potentially be considered for a Marine Protected Area under the federal Oceans Act. As part of its mandate for monitoring established and potential conservation areas, DFO Science regularly deploys instruments including conductivity/temperature/depth (CTD) loggers, and other instruments for measuring dissolved oxygen, nutrients, and other chemical ocean properties. This data collection includes temperature and other oceanographic records for the ESI AOI from June 2024 onward. The data are derived from temperature loggers (Hobo Tidbit loggers or similar) and Sea-Bird MicroCATs, but may in future years include current profiles or additional oceanographic data. These data will be used to monitor temperatures in this coastal region to detect any biological shifts associated with temperature and climate fluctuations, and be used to groundtruth oceanographic models.Cite this data as: Jeffery, N., Stanley, R., Pettitt- Wade, H. (2025): Data of: Baseline oceanographic records for the Eastern Shore Islands Area of Interest.Published: September 2025. Coastal Ecosystems Science Division, Fisheries and Oceans Canada, Dartmouth, N.S. https://open.canada.ca/data/en/dataset/f0020cec-5671-4908-8fdd-11fc097de99d

This dataset contains the surface temperature and salinity data of the enlarged coastal thermograph network of the St. Lawrence river, estuary and gulf system. It includes data from the Canadian Hydrographic Service water level network (SINECO), the Department of Fisheries and Oceans (DFO)-Quebec long-termed thermograph monitoring program network and the oceanographic buoy network.Each station is linked with a .png file showing the temperature and salinity time series and with a .csv file containing the surface temperature and salinity data themselves (columns : Station,Latitude,Longitude,Date(UTC),Depth/Profondeur(m),Temperature/Température(ºC),Salinity/Salinité(psu)).Supplemental InformationA detailed description of the networks (SINECO, oceanographic buoys and the DFO-Quebec thermograph monitoring program) is available at the St. Lawrence Global Observatory (SLGO) portal :SINECO : https://ogsl.ca/en/tide-gauges-dfo-chs/Oceanographic buoys : https://ogsl.ca/en/marine-conditions-buoys-dfo/Thermographs: https://ogsl.ca/en/marine-conditions-thermographs-dfo/Technical Reports related to the Thermograph Network (the last one is also available at the same hypertext link mentionned above) :Pettigrew, B., Gilbert, D. and Desmarais R. 2016. Thermograph network in the Gulf of St. Lawrence. Can. Tech. Rep. Hydrogr. Ocean Sci. 311: vi + 77 p.Pettigrew, B., Gilbert, D. and Desmarais R. 2017. Thermograph network in the Gulf of St. Lawrence: 2014-2016 update. Can. Tech. Rep. Hydrogr. Ocean Sci. 317: vii + 54 p.

Description:Seasonal climatologies for salinity of the Northeast Pacific Ocean were computed to cover the period 2001 to 2020. Historibal observations included all available conductivity-temperature_depth (CTD), bottle and profiling floats in the NODC World Ocean Database, Marine Environmental Data Services (MEDS), Institute of Ocean Sciences Water Properties website and the Canadian Integrated Ocean Observing System (CIOOS Pacific).Methods:Interpolation was carried out in up to fifty-two vertical levels from surface to 5000m. Data-Interpolating Variational Analysis (DIVA) was used for spatial interpolation for all years within each season and estimates projected onto a consistent grid. The average of the grid nodes was calculated to obtain the seasonal climatology. DIVA was used again on the final climatology followed by a median filter and a 5-point smoother. Spring months were defined as April to June, summer months were defined as July to September, fall months were defined as October to December, and winter months were defined as January to March. The data available here contain raster layers of seasonal salinity climatology for the Canadian Pacific Exclusive Economic Zone (EEZ), a subset of seasonal climatology of the Northeast Pacific Ocean, with high spatial resolution of 1/300 degree.Data Sources:NODC, MEDS, IOS and CIOOS Pacific Data.Uncertainties:Uncertainties are introduced when quality controlled observational data are spatially interpolated to varying distances from the observation point. Climatological averages are calculated from these interpolated values.

The shallow substrate bottom type model was created to support near shore habitat modelling. Data sources include both available observations of bottom type and environmental predictor layers including oceanographic layers, fetch, and bathymetry and its derivatives. Using weighted random forest classification from the ranger R package, the relationship between observed bottom type and predictor layers can be determined, allowing bottom type to be classified across the study areas. The predicted raster files are classified as follows: 1) Rock, 2) Mixed, 3) Sand, 4) MudThe categorical substrate model domains are restricted to the extent of the input bathymetry layers (see data sources) which is 5 km from the 50 m depth contour.

Description:Seasonal mean primary production from the British Columbia continental margin model (BCCM) were averaged over the 1993 to 2020 period and depth-integrated to create seasonal mean climatology of the Canadian Pacific Exclusive Economic Zone. Methods:Total primary production is the sum of diatoms and flagellates production. Spring months were defined as April to June, summer months were defined as July to September, fall months were defined as October to December, and winter months were defined as January to March. The data available here contain a raster layer of seasonal depth-integrated primary production climatology for the Canadian Pacific Exclusive Economic Zone at 3 km spatial resolution.Uncertainties:Model results have been extensively evaluated against observations (e.g. altimetry, CTD and nutrient profiles, observed geostrophic currents), which showed the model can reproduce with reasonable accuracy the main oceanographic features of the region including salient features of the seasonal cycle and the vertical and cross-shore gradient of water properties. However, the model resolution is too coarse to allow for an adequate representation of inlets, nearshore areas, and the Strait of Georgia.

Description:Seasonal mean primary production from the British Columbia continental margin model (BCCM) were averaged over the 1981 to 2010 period and depth-integrated to create seasonal mean climatology of the Canadian Pacific Exclusive Economic Zone. Methods:Total primary production is the sum of diatoms and flagellates production. Spring months were defined as April to June, summer months were defined as July to September, fall months were defined as October to December, and winter months were defined as January to March. The data available here contain a raster layer of seasonal depth-integrated primary production climatology for the Canadian Pacific Exclusive Economic Zone at 3 km spatial resolution.Uncertainties:Model results have been extensively evaluated against observations (e.g. altimetry, CTD and nutrient profiles, observed geostrophic currents), which showed the model can reproduce with reasonable accuracy the main oceanographic features of the region including salient features of the seasonal cycle and the vertical and cross-shore gradient of water properties. However, the model resolution is too coarse to allow for an adequate representation of inlets, nearshore areas, and the Strait of Georgia.

A derivative of DFO's benthic imagery surveys for the Marine Conservation Targets Program in the St. Anns Bank Marine Protected Area (https://open.canada.ca/data/en/dataset/2a55e2b4-cbb6-4fea-b17e-a16f5e99e68f), occurrence records in this analysis represent presence/absence and density of a biogenic habitat-forming species in five drift-camera transects in the southeast corner of the MPA, off the coast of Cape Breton, Nova Scotia, Canada. Presence/absence and count data of the unstalked crinoid (Heliometra glacialis) were derived from the use of high-resolution Nikon D850 still images (n=428, see link to parent record for more descriptive survey information and complete imagery dataset) and continuous high-definition video observations (approximately one observation every second using a 1Cam Mk6, SubC Imaging camera; n=8522). Densities were estimated by dividing the crinoid counts by the field of view (calculated from lasers with 10-cm spacing). Substrates were reported for each video observation, documenting the dominant substrate (>50% cover) according to a modified Wentworth scale (i.e., sand, gravel, pebble, cobble, boulder, bedrock; Wentworth 1922). Crinoids were observed in ~44% of the area of the five transects (~4811 m2), forming dense beds along sloped features from 77-119-m depths, predominantly on cobble and pebble substrates, reaching densities of up to 59 ind. m-2 and 139 ind. m-2 in the digital still images and video observations, respectively.Cite this data as: Lawton P, Teed L. Fine-scale observations of high density Heliometra glacialis (Crinoidea) beds from five near-seafloor imagery transects from a two-year survey in the St. Anns Bank Marine Protected Area, Atlantic Canada. Published March 2026. Coastal Ecosystems Science Division, Fisheries and Oceans Canada, St. Andrews, N.B.References:- Wentworth, C.K. 1922. A scale of grade and class terms for clastic sediments. The Journal of Geology 30(5): 377-392.

Geographic bathymetric grid data at 100 m x 100 m pixel resolution.Datum: WGS84Collaboration of Canada, the United States of America and the European Union as part of the Atlantic Ocean Research Alliance's second project under the Galway Statement. Project mapped the North Atlantic seafloor along a transect from Halifax, Canada to Tromsø, Norway to further the understanding of marine habitats, conservation and navigation. Chief Scientist / Primary Investigator name: Paola Travaglini Platform: CCGS Louis S. St- Laurent (Canadian heavy icebreaker)Device 1 type: Multibeam echo-sounder (sonar)Device 1 manufacturer: Kongsberg Device 1 model: EM122, hull installed behind ice protection window Data and Data format:100 m resolution grid of bathymetryBAG format: Bathymetric Attributed Grid ObjectNavigation and positioning: Trimble GNSS receiver + antennas Applanix POS/MV v5 inertial measuring system Horizontal Datum: WGS84 (G1762) Tidal correction:Zero tide applied: tides are not well known for the major part of the data and tides over very deep water are generally negligible. Sound Velocity Profile measurements:In-situ sound velocity profiles were applied.Note on accuracy/S-44 survey standards:Considering the intended output from this survey (IHO Order 1a - Areas shallower than 100 metres where under-keel clearance is less critical but features of concern to surface shipping may exist.) and using an average depth of 2000m as ‘d’ in the IHO Standard Equation - the allowable Total Vertical Uncertainty (TVU) must be < 26m which indeed the data has achieved (by comparison with overlapping datasets from other surveys/agency data).IHO Order 1aHorizontal positioning accuracy: 5.0 m + 5% of depth (95% Confidence level)(~105 m at a mean depth of 2000 m)Vertical positioning accuracy: 2.5 m < 26 m = Sqrt((0.5 m)^2+(0.013 x 2000 m)^2)