The Yukon Geological Survey stores a significant amount of geological information gathered by exploration companies in compliance with the Quartz Mining Act. This information is primarily contained in assessment reports (AR). Since 1920, more than 8000 hardrock assessment reports have been collected, with more than 6000 of these containing geochemical data on surficial samples (e.g., soil, rock, stream sediment, and vegetation). The sheer volume and historical depth of these data provide valuable insight into the mineral potential of the Yukon. Exploration companies rely on data from ARs to search for exploration targets. To aid exploration companies, YGS has developed this database to consolidate geochemical data extracted from assessment reports. This database, the Geochemical Assessment Report Data Extracted database (GARDEd), was created by extracting and compiling data from more than 300 assessment reports. GARDEd was initially populated with data from samples within a 75 km radius of the Casino deposit to evaluate the data extraction procedures and assess the feasibility of the database. Data capture focused on recent ARs because these were available in digital format. The initial release of this database contains approximately 10% of the geochemical data from surface samples within Yukon ARs.YGS encourages users to send feedback to [geology@yukon.ca](mailto:geology@yukon.ca) to assess the usefulness of the dataset and determine how much effort should be invested to capture older, non-digital ARs.Distributed from [GeoYukon](https://mapservices.gov.yk.ca/GeoYukon/) by the [Government of Yukon](https://yukon.ca/) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

This map displays the distribution of organic soils in the agricultural region of Alberta. Organic soils consist of layers of material with greater than 30 percent organic matter and a total thickness of greater than 40 cm. Organic soils are generally saturated with water for most of the year unless drained. Saturation inhibits decomposition and encourages continued accumulation of organic material. Drainage of these soils can result in a rapid increase in decomposition and a reduction in the thickness of the organic material. This resource was created in 2002 using ArcGIS.

The Agri-Environmental Indicator Soil Organic Matter data series provides a measure of soil health and an estimate of how much carbon dioxide (CO2) has been removed from the atmosphere by plants and sequestered as soil organic carbon (SOC) in agricultural soils.

Geochemistry includes information related to rock samples and sediment samples.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

This map displays the distribution of the main soil types found within the province of Alberta. The distribution pattern of soils in Alberta is strongly linked to climate and parent materials. Climate affects the location of different soil groups. The driest area in southeastern Alberta is represented by the presence of Brown Chernozems. As one proceeds north and west, the soils and associated vegetation reflect the increase in available moisture.In Alberta, Organic soils generally occur in association with Luvisolic soils. These soils form under wet conditions where the organic layer (greater than 30% organic matter) accumulates faster than it decomposes. The organic layer varies in thickness from 40 to 160+ cm, and under natural conditions, the water table is at or near the surface. In some areas of the province, Organic soils may be artificially drained and used for agricultural production. This resource was created in 2002 using ArcGIS.

This dataset represents Lake Water Geochemical Analyses for the province of Saskatchewan.This dataset represents Lake Water Geochemical Analyses for the province of Saskatchewan. During the intense level of activity directed toward the exploration for uranium in the 1970s, the Saskatchewan Geological Survey and the Geological Survey of Canada funded the collection of several thousand samples of sediments and waters from lakes around the Athabasca Sandstone. All sediment samples were analyzed for U, Cu, Ni, Pb, Zn, Co, Fe and Mn. Selected samples were analyzed for a wide range of additional elements. All lake waters were analyzed for U, F-, and pH, and several hundred samples were analyzed for additional elements and parameters. The Summary Table that precedes this text shows the numbers of samples and elements, and the source of data from which the 8,939 samples listed in the 9 Tables are derived. Over 20 years ago the data in these listings were coded into the Saskatchewan Geological Survey’s ‘Geochemical Data File’, designed in the 1970s (Dunn, 1978b, 1979), and developed by SaskComp (the computer programming department of the Saskatchewan government at that time). The only database listed in the present report that was not in the Geochemical Data File was GSC Open File #779, jointly produced by the SGS and GSC (Coker and Dunn, 1981, 1983) and containing data from detailed surveys of the IAEA/NEA Athabasca Test Area (adjacent to Wollaston Lake). The old Geochemical Data File was state-of-the-art at the time, and data have been available for public scrutiny since inception in 1977. Demonstrations of the File were given at the SGS Open House meetings in 1977 and 1978. The explosive development of personal computers during the past 20 years has made the original Geochemical Data File something of a dinosaur, and the data have been difficult to access and manipulate. The present data file is a compilation that has resulted from detailed evaluation, streamlining, editing and breakdown of the data into simplified Excel files that can easily be manipulated by anyone with a modest knowledge of computers. These data are of historic value and their re-evaluation could assist in current uranium exploration programs. Of particular value is their use in environmental studies, since they represent a 1970s snapshot of the chemistry of the northern Saskatchewan environment prior to mine developments. At the start of sample collection in 1975 Key Lake had not been drained and the only mine site was the pit at Rabbit Lake. This compilation has divided the data into 9 tables, each presented as a shape file. There are 6 shape files of lake sediment data (1LS - 6LS) and 3 shape files of lake water data (4LW - 6LW). Lake water samples were from the same sites as the lake sediments listed in files 4LS - 6LS, hence they have been given the same numeric designation. The data are mostly compatible among the Tables. However, although analytical methods and quality control protocols were similar, they were sufficiently different to warrant treating the data as separate listings. For any regional plotting of data extracted from all Tables these differences should be considered when interpreting distribution patterns. Of particular relevance is that all sediment samples were analyzed for U by neutron activation, with the exception of 158 samples (Table 2LS) where determinations were by fluorometry. These data sets should be fully compatible, because the two techniques provide similar values. Comparison of U data from sediment samples collected and analyzed over four years, then reanalyzed as one batch has shown excellent precision and accuracy (Coker and Dunn, 1981). All U in water determinations were by fluorometry, and all F- by selective ion electrode. Loss on ignition (LOI) data were determined by ignition at 500o C for 4 hours. Table 1LS This data set comprises samples collected by SGS between 1975 and 1978. Samples were digested in aqua regia and all trace elements, except U (see above), were determined by atomic absorption spectrometry (AA).  **Please Note – All published Saskatchewan Geological Survey datasets, including those available through the Saskatchewan Mining and Petroleum GeoAtlas, are sourced from the Enterprise GIS Data Warehouse. They are therefore identical and share the same refresh schedule.

The National Ecological Framework for Canada's "Surface Material by Ecozone” dataset provides surface material information within the ecozone framework polygon. It provides surface material codes and their English and French language descriptions as well as information about the percentage of the polygon that the component occupies. Surface material includes the abiotic material at the earth's surface. The materials can be: ICE and SNOW - Glacial ice and permanent snow ORGANIC SOIL - Contains more than 30% organic matter as measured by weight ROCK - Rock undifferentiated MINERAL SOIL - Predominantly mineral particles: contains less than 30% organic matter as measured by weight URBAN - Urban areas. Note that only a few major urban area polygons are included on SLC source maps, therefore, do not use for tabulating total urban coverage

The National Ecological Framework for Canada's "Surface Material by Ecodistrict” dataset provides surface material information within the ecodistrict framework polygon. It provides surface material codes and their English and French language descriptions as well as information about the percentage of the polygon that the component occupies. Surface material includes the abiotic material at the earth's surface. The materials can be: ICE and SNOW - Glacial ice and permanent snow ORGANIC SOIL - Contains more than 30% organic matter as measured by weight ROCK - Rock undifferentiated MINERAL SOIL - Predominantly mineral particles: contains less than 30% organic matter as measured by weight URBAN - Urban areas. Note that only a few major urban area polygons are included on SLC source maps, therefore, do not use for tabulating total urban coverage.

The National Ecological Framework for Canada's "Surface Material by Ecoregion” dataset provides surface material information within the ecoregion framework polygon. It provides surface material codes and their English and French language descriptions as well as information about the percentage of the polygon that the component occupies. Surface material includes the abiotic material at the earth's surface. The materials can be: ICE and SNOW - Glacial ice and permanent snow ORGANIC SOIL - Contains more than 30% organic matter as measured by weight ROCK - Rock undifferentiated MINERAL SOIL - Predominantly mineral particles: contains less than 30% organic matter as measured by weight URBAN - Urban areas. Note that only a few major urban area polygons are included on SLC source maps, therefore, do not use for tabulating total urban coverage

The National Ecological Framework for Canada's "Surface Material by Ecoprovince” dataset provides surface material information within the ecoprovince framework polygon. It provides surface material codes and their English and French language descriptions as well as information about the percentage of the polygon that the component occupies. Surface material includes the abiotic material at the earth's surface. The materials can be: ICE and SNOW - Glacial ice and permanent snow ORGANIC SOIL - Contains more than 30% organic matter as measured by weight ROCK - Rock undifferentiated MINERAL SOIL - Predominantly mineral particles: contains less than 30% organic matter as measured by weight URBAN - Urban areas. Note that only a few major urban area polygons are included on SLC source maps, therefore, do not use for tabulating total urban coverage