A research survey of scallops (mainly sea scallop Placopecten magellanicus, but also Icelandic Scallop Chlamys islandica) using a dredge was carried out by DFO (Fisheries and Oceans Canada) every 1 or 2 years since 1992 in the Magdalen Islands (fishing area 20). The main objective of this research survey was to assess Sea Scallop stocks. Another objective was to document taxa associated with scallop habitat according to a fixed random sampling plan. Occurrences by species (or taxon) are presented by station. The taxonomic and geographical validity of the data was checked and the World Register of Marine Species served as the taxonomic authority for naming all taxa recorded during the survey. Epibenthic invertebrates (mainly molluscs, echinoderms and crustaceans) as well as demersal fish were identified from the dredge catches. The current data starting in 2021 are available at the following link : https://open.canada.ca/data/en/dataset/6529a4b0-f863-4568-ac71-1fa26cf68679The study area is located south of the Magdalen Islands and the sampling of scallop beds is carried out at depths of 10 to 38 m, generally around 25 to 35 m. A random selection of sampling stations is carried out from a fixed station grid. Sampling is done along transects at these randomly drawn stations in the study area. Sampling is done with a lined Digby scallop dredge (20 mm mesh) over approximately 500 m along the seabed. The four baskets of the dredge are examined for all scallops. Next, a basket (the first on the starboard side) is sorted and examined for associated species. Most specimens are counted by taxon. The presence or relative abundance of undersized and numerous, or colonial, organisms is noted. Special cases are sometimes retained for taxonomic analysis, for example, ascidians (to monitor invasive species) and sponges (to document new species).

Historical finds of Coleophora laricella

Funded under DFO's Marine Conservation Targets Program, this optical imagery benthic survey documents the occurrence and estimated percent cover of the invasive colonial tunicate, Didemnum vexillum in seven drift-camera transects in the 'Head Harbour/West Isles Archipelago/The Passages' Ecologically and Biologically Significant Area (ESBA, ~113km2) in the western Bay of Fundy, New Brunswick, Canada. Occurrence data was derived from the use of high-resolution still images (n=386) taken periodically throughout each transect, and simultaneous continuous high-definition video. Video was divided into 20-second segments (here, we report the start and end location of each segment within a transect) and when D. vexillum was present in a video segment, frequency of occurrence was classified as common (continuous coverage/patches throughout the video segment), occasional (individual colonies of various sizes encountered >5 times throughout the video segment), or rare (small, isolated colonies encountered ≤5 times throughout the video segment). A video segment was deemed unusable and removed from the dataset if there was too much turbidity, or if the camera position was too high off-bottom to reliably image the seafloor. For still images, when D. vexillum was observed in an image, colony percent cover was categorized as >50%, 26-50%, 6-25%, or ≤5% of the images field of view (FOV). Distance travelled and distance between still images (m) was calculated using ArcGIS tools. FOV was estimated by measuring the length and width of a subset of still images and video frame grabs in ImageJ2, using 10-cm lasers for scale. FOV was standardized for each reported altitude, and area sampled (m2) along a continuous video segment was estimated by multiplying the average FOV by the distance travelled in that segment. D. vexillum was found in 44% of the area sampled at depths from 34 to 118m, deeper than previous reports globally of ~80m.Cite this data as: Teed LL, Goodwin C, Lawton P, Lacoursière-Roussel A, Dinning KM (2024) Multiple perspectives on the emergence of the invasive colonial tunicate Didemnum vexillum Kott, 2002 in the western Bay of Fundy, Atlantic Canada. BioInvasions Records 13(3): 713–738, https://doi.org/10.3391/bir.2024.13.3.12

An exploratory project on the taxonomic and genetic diversity of decapods in three ocean subregions (Northeast Pacific, Canadian Arctic, and Northwest Atlantic), which were sampled in 2022, was undertaken by the Arctic Working Group under the Canada-U.S. Fisheries and Climate Collaboration between Fisheries and Oceans Canada (DFO) and the National Marine Fisheries Service (NMFS) of the National Oceanic and Atmospheric Administration (NOAA). This collaboration framework aims to pool Canadian and U.S. data to explore the impacts of broad-scale climate change on marine biodiversity. In early summer 2022, a sampling protocol with the selection of targeted decapods was provided to DFO and NOAA collaborators. Targeted genera were collected from a total of 10 research programs across three ocean subregions and four marine regions. The Northeast Pacific samples were collected in the Bering Sea during the Northern Bering Sea Ecosystem and Surface Trawl Survey, and the Eastern and Northern Bering Sea Continental Shelf Bottom Trawl Survey of Groundfish and Invertebrate Fauna onboard the F/V Northwest Explorer, F/V Alaska Knight and F/V Vesteraalen. In the Western Canadian Arctic (mainly from Beaufort Sea and Amundsen Gulf), specimens were collected during DFO’s Canadian Beaufort Sea – Marine Ecosystem Assessment (CBS-MEA) survey onboard the F/V Frosti. In Eastern Canadian Arctic (mainly from Baffin Bay and Davis Strait), specimens were collected during DFO’s Knowledge and Ecosystem-Based Approach in Baffin Bay (KEBABB) survey onboard the CCGS Amundsen and DFO’s North Atlantic Fisheries Organization (NAFO) Subarea 0B survey onboard the R/V Tarajoq. In the Estuary and Gulf of St. Lawrence (EGSL), specimens were collected from coastal surveys (scallops, sea cucumber, snow crab, and whelk surveys) onboard the CCGS Leim and offshore during the Ecosystemic Survey onboard the CCGS Teleost. Decapods were collected from various sampling gears (benthic beam trawl, modified Atlantic Western IIA otter trawl, Bacalao trawl, shrimp trawl, Digby scallop dredge, or modified sea cucumber dredge) and identified to the lowest possible taxonomic level and photographed, when possible. All specimens were frozen at sea (n = 995). In the lab, the identifications were validated or refined with the photos and the frozen specimens. DNA was extracted for 87 specimens and a section of COI gene was amplified in order to be sequenced using Sanger method. Sequences were compared with existing data using The Basic Local Alignment Search Tool (BLAST) in the National Center for Bio-technology Information Nucleotide database (NCBI-nt, including the GenBank database) to compare scientific names, where available.The present dataset includes 391 decapod species occurrences. DNA was extracted for a subset of 87 specimens (COI gene); sequences are publicly available on BOLD data portal under project code DDAO (see supporting document "citations_references.csv" for more information).The data are presented in Darwin Core format and are separated in three files:The "Activité_décapodes_DDAO_decapods_event_en" file contains information about missions, stations and deployments, which are presented under a hierarchical activity structure.The "Occurrence_décapodes_DDAO_decapods_en" file contains the taxonomic occurrences.The "ADN_décapodes_DDAO_decapods_DNA_en" file contains the DNA derived data.For further details, please refer to the technical report available in the supporting document named "citations_references.csv". USE LIMITATION:To ensure scientific integrity and appropriate use of the data, we would encourage you to contact the data custodian.

This data record contains four digitized maps recreated from an original report entitled An Ecological Sketch of Some Fundy Fisheries published by the Conservation Council of New Brunswick. The selected maps summaries information obtained from active and retired fishermen, combined with a survey of the scientific and historical information. They illustrate knowledge on spawning, migration, and nursery grounds for herring and other fisheries for Grand Manan, Bay of Fundy, and Gulf of Maine.Cite this data as: Coon, D. 1999. An Ecological Sketch of Some Fundy Fisheries. Conservation Council of New Brunswick, Fredericton, NB. 32 pp. Published: June 2026. Coastal Ecosystems Science Division, Maritimes Region, Fisheries and Oceans Canada, Dartmouth NShttps://open.canada.ca/data/en/dataset/d09eee14-4786-4787-a596-9ddec1ad9342

Zooplankton samples were collected at Ocean Station "P" (50.0000, -145.0000) from 1956 to 1980, and were analyzed to various levels of taxonomic resolution over the years. Although summaries of these data have been previously published ((LeBrasseur 1965) and (Fulton 1978, 1983)) the detailed species data have never been published. This detailed dataset contains total zooplankton wet weights/m3 for the whole period of 1956 to 1980, as well as densities (numbers/m3) for five major taxa (copepods, chaetognaths, euphausiids, amphipods, and Aglantha) from 1964 to 1967, species identifications, counts and lengths for many samples collected between 1968 to 1980. The attached supporting document (Ocean Station "Papa" detailed zooplankton data: 1956 – 1980) contains information on the methods used to collect and process the data along with descriptions of a number of fairly minor points about the data that were not resolved. It also describes, in detail, the format of the original data files, the corrections/changes that were made to these files in creating this version, and how these errors affect what was published in Fulton (1983).The purpose of this record is to make the detailed data available to the scientific community in an electronic format and to provide a convenient reference for citing the detailed data. Waddell, Brenda J., and Skip McKinnell. 1995. Ocean Station "Papa" detailed zooplankton data:1956 - 1980. Can. Tech. Rep. Fish. Aquat. Sci. 2056: 21 p.

Description:Biophysical Units: Under the Pacific Marine Ecological Classification System (PMECS; DFO 2016; Rubidge et al. 2016), biophysical units are areas of distinct physiographic and oceanographic conditions and processes that shape species composition at spatial extents of 1000s of km. Geomorphic units:Geomorphic units or geozones are discrete geomorphological structures at the scale of 100s of km that are assumed to have distinctive biological assemblages (e.g., plateaus, ridges, seamounts, canyons). Although the spatial scale of geomorphic units is nested within biophysical units, a single geomorphic unit such as a trough may span more than one biophysical unit. The following 5 layers are included in this geodatabase:1. Biophysical_Units_L4A - Predicted PMECS Biophysical Units (Level 4A) output from the random forest analysis2. Biophysical_Units_L4B - Predicted PMECS Biophysical Units (Level 4B) output from the random forest analysis3. Biophysical_Units_ProbAssign_L4AB - Layer showing the probability that a grid cell was assigned to a given biophysical unit in the final random forest predictive modelling step4. Cluster_L4AB - Layer showing the output of species assemblage cluster analysis5. Geomorphic_Units - Geomorphic units for the BC coast that combines geomorphic units produced by Rubidge et al. 2016) and Proudfoot and Robb (2022).Methods:Biophysical Units:Rubidge et al. (2016) used a two-step process to identify biophysical units in British Columbia. First, a cluster analysis based on the similarity of species composition was used to group sites with similar species into distinct biological assemblages. Second, a random forest analysis was used to identify environmental correlates of the biological assemblages identified by the cluster analysis and to predict and assign the biological assemblage present in areas with too few biological data. Two different similarity thresholds were used to identify two levels (4A, 4B) of biophysical units; see Rubidge et al. (2016) for details. Indicator species for each assemblage (biophysical unit) were also identified.Geomorphic units:Rubidge et al. (2016) used the benthic terrain modeller (BTM) tool with broad and fine-scale benthic positioning index (BPI) parameters to define geomorphic units on the continental shelf in the Northern Shelf Bioregion and the continental slope in both the Northern Shelf Bioregion and Southern Shelf Bioregion. In 2022, geomorphic units were produced for the Strait of Georgia and Southern Shelf Bioregions following the same methods as Rubidge et al. (2016) (Proudfoot and Robb 2022). The geomorphic units produced as part of the PMECS process were merged with the geomorphic units produced for the Strait of Georgia and Southern Shelf bioregions to produce a continuous spatial data product representing geomorphic units for the Canadian Pacific continental shelf and slope. After merging, the geomorphic units produced in 2016 were unchanged (i.e., they are consistent with the original geomorphic units described in Rubidge et al. 2016).Data Sources:From Rubidge et al. (2016): Species data was taken from Fisheries and Oceans Canada (DFO) standardized fisheries-independent research surveys: groundfish trawl and long-line (2003-2013), Tanner Crab trawl and trap (2000–2006), and Dungeness Crab trap (2000–2014). Environmental data came from NASA, the Canadian Hydrographic Service, Fisheries and Oceans Canada, Bio-ORACLE, and elsewhere (details in Rubidge et al. 2016). From Proudfoot and Robb (2022): bathymetry data came from Natural Resources Canada (details in Proudfoot and Robb 2022).Uncertainties:The data is intended for use at the bioregional scale, and caution should be used for finer-scale analyses.

Historical finds of Coleophora serratella

Zooplankton and ichthyoplankton data are archived in the Institute of Ocean Sciences (IOS) Zooplankton Database. The data available spans from 1980 to 2018 and is an extraction of vertical net hauls as biomass by major taxa collected during surveys conducted in the oceanic and coastal waters of the Northeast Pacific Ocean. The majority of vertical net hauls in this data set were collected from 10 metres above the sea floor or an approximate maximum depth of 250 metres. For further data requests, please use the contact information provided.

Species characterization by environmental DNA (eDNA) is a method that allows the use of DNA released into the environment by organisms from various sources (secretions, faeces, gametes, tissues, etc.). It is a complementary tool to standard sampling methods for the identification of biodiversity. This project provides a list of invertebrates species whose DNA has been detected in water samples collected at 2018 using the marker COI.The surveys were carried out in the summer of 2018 from August 11 to 14, between Forestville and Godbout (Haute-Côte-Nord). Sampling was carried out between 9-52 meters depth in 40 stations with one sample par station. Two liters of water were filtered through a 1.2 µm fiberglass filter. DNA extractions were performed with the DNeasy Blood and Tissue extraction kit (Qiagen). Negative field, extraction and PCR controls were added at the different stages of the protocol. Libraries at the COI locus were prepared by Genome Quebec and sequenced on an Illumina MiSeq PE250 system. The bioinformatics analysis of the sequences obtained was carried out using an in-house analysis pipeline as reported in Bourret et al. 2022. A first step made it possible to obtain a molecular operational taxonomic unit table (MOTU) using the cutadapt software for the removal of the adapters and the DADA2 R package for the filtration, fusion, chimera removal and data compilation. The MOTUs table was subsequently corrected by taking into account the negative controls, where the number of observations in the latter was removed from the linked samples. Singleton MOTUs have also been removed. Finally, the taxonomic assignments were carried out on the MOTUs using the IDTAXA classifier (present in the DECIPHIER R package) using a training set trained on the COI reference bank for Golf St-Laurent (GSL-rl v1.0, https://github.com/GenomicsMLI-DFO/MLI_GSL-rl) and a threshold of 40. Detections with an “Unreliable due to gaps” category were reported at the genus level only.The file provided includes generic activity information, including site, station name, date, marker type, assignment types used for taxa identification, and a list of taxa or species. The list of taxa has been verified by a biodiversity expert from the Maurice-Lamontagne Institute.This project was funded by Fisheries and Oceans Canada's Coastal Environmental Baseline Data Program under the Oceans Protection Plan. This initiative aims to acquire baseline environmental data that contributes to the characterization of significant coastal areas and supports evidence-based assessments and management decisions to preserve marine ecosystems.Data are also available on SLGO platform : https://doi.org/10.26071/ogsl-cd4c205b-f63b