This dataset contains parks and protected areas managed for important conservation values and are dedicated for the preservation of their natural environments for the inspiration, use and enjoyment of the public. Places of special ecological importance are designated as ecological reserves for scientific research and educational purposes. Source data is Tantalis. *April 18, 2018: Prior to this date this dataset had one spatial boundary per park per survey plan that intersected the boundary of that park. This resulted in multiple identical boundaries for each park that had more than one survey plan overlapping it’s boundaries. The change aggregated the park data so that there is just one boundary per park with the plan numbers concatenated into a single column where each different plan number is separated by a comma.

Locations of scenic points already existing and potential in the Gatineau Park borders.

The Eastern Slopes Land Use Zoning dataset is comprised of all the polygons that represent Eastern Slopes Land Use Zones in Alberta. The dataset was created as a basis to provide analysis for nominating Special Places sites for later designation, under the Special Places 2000 Project. Don Getty Wildland Provincial Park (which comprised mainly of Zone 1 - Prime Protection & Zone 2 - Critical Wildlife) is one of the examples. Except designated natural areas. zoning and any associated policy direction for managing resources and surface access on the general Crown lands within these land use zones do not apply to lands that have been designated as a park or protected area under the Provincial Parks Act, the Willmore Wilderness Park Act or the Wilderness Areas, Ecological Reserves, Natural Areas and Heritage Rangelands Act. This dataset was compiled from many Integrated Resource Plans (IRP) studies as well as the Eastern Slopes Policy which were used in the former Special Places 2000 Project planning process.

The Parks and Protected Areas dataset contains Parks and Protected Area boundaries for sites administered by the Government of Alberta. National parks, because of their similar intent, are also included. GIS line work representing provincial park/protected area boundaries has been interpreted from written legal descriptions appended to Orders-in-Council granted Royal Assent by the Lieutenant Governor of Alberta. In case of discrepancy between the GIS data and the written legal description, the written legal description shall take precedence. The Government of Canada is the authoritative source for GIS boundaries of National Parks. National Park boundaries are included herein for reference, only. GIS line work representing National Park boundaries has been interpreted from written legal descriptions within Schedule 1 of the Canada National Parks Act, and adapted to align with the Alberta Provincial Base Features/Foundational Data collection. Defining document is Canada National Parks Act, Statues of Canada 2000, Chapter 32, Assented to 20th October, 2000. In case of discrepancy between the GIS data and the written legal description, the written legal description shall take precedence. Please note that this dataset replaces the following datasets: Ecological Reserve, Heritage Rangeland, National Park, Natural Area, Provincial Park, Provincial Recreation Area, Wilderness Area, Wilderness Park, and Wildland Park.

Parks Canada’s National Program for Ecological Corridors was initiated to strengthen the network of protected areas across Canada through the creation of ecological corridors. To achieve this goal, Parks Canada sought out to develop tools for a common approach on the scientific and governance aspects of corridor creation and management. The National Priority Areas for Ecological Corridors (NPAECs) were developed using a scientific framework for national-scale prioritization of where ecological corridors are most urgently needed. Improving or maintaining ecological connectivity in these areas will greatly benefit biodiversity conservation and climate change adaptation. The NPAECs were identified based on a methodology that is multivariate, data driven, national in scale, and spatially explicit at a coarse resolution. The Criteria for Ecological Corridors in Canada provide a common approach to ensure ecological corridors are managed and stewarded to maintain or restore effective ecological connectivity, while upholding Indigenous stewardship values. They are derived from the internationally recognized International Union for Conservation of Nature’s Guidelines on Connectivity and adapted to the Canadian context. The NPAECs geographic data layer, the list of datasets used to identify them, the Criteria and their accompanying guidance can be found below. More details and context about both program elements are available on the Program’s webpage (https://parks.canada.ca/nature/science/conservation/corridors-ecologiques-ecological-corridors).

Described in the Gatineau Park Master plan (2021), the land use designations are the authorized activities or uses in a given area. They support the implementation of the park’s vision and goals. They also ensure that interventions and activities are spatially and functionally consistent. https://ncc-ccn.gc.ca/our-plans/gatineau-park-master-planhttps://ncc-website-2.s3.amazonaws.com/documents/GPMP_ENG_2021_02_26_Single_Page.pdf#page=65

This boundary layer shows all 92 provincial parks and one park reserve in Manitoba.This boundary layer shows all 92 provincial parks and one park reserve in Manitoba. The Manitoba Parks dataset is current to June 16, 2017. Manitoba’s provincial parks and park reserves form the provincial park system. The purposes of this system are defined in The Provincial Parks Act. The system is intended to:a) conserve ecosystems and maintain biodiversityb) preserve unique and representative natural, cultural and heritage resources c) provide outdoor recreational and educational opportunities and experiences in a natural setting. All provincial parks in Manitoba are classified according to the purpose and management of the park. There are five classifications defined under The Provincial Parks Act. 1.         WILDERNESS PARKS Wilderness parks contribute to the provincial network of protected areas by preserving representative areas of an ecoregion. Discussions with and support from local communities are crucial in the establishment of new wilderness parks and in ensuring that these remote areas continue to be protected into the future. 2.         NATURAL PARKS The main purpose of a natural park is both to preserve areas of an ecoregion and to accommodate a diversity of recreational opportunities and resource uses. Natural parks minimize land available for resource extraction and, to the greatest extent possible, contribute to the provincial network of protected areas and provide outdoor recreational and educational experiences in a natural setting. 3.         INDIGENOUS TRADITIONAL USE PARKS The main purpose of an Indigenous traditional use park is to preserve land that has been traditionally used by Indigenous Peoples and that is significant to Indigenous Peoples because of its natural features or cultural importance. The establishment of new Indigenous traditional use parks is based upon proposals put forward by Indigenous Peoples and the significance of these sites as traditional use areas. 4.         RECREATION PARKS Recreation parks provide outdoor recreation opportunities in a natural setting. The establishment of new recreation parks is based on an assessment of recreational needs, economic viability and existing community services. 5.         HERITAGE PARKS Heritage parks preserve unique and representative cultural and heritage resources of outstanding provincial significance. Partnerships with heritage groups and communities are essential to the creation of heritage parks. PARK RESERVES To assist in the creation of new parks and protected areas, The Provincial Parks Act also provides for the establishment of park reserves. The park reserve status provides for interim protection of areas under consideration. Areas selected for designation could ultimately become provincial parks or be placed under another appropriate designation, such as an ecological reserve. For more information on the provincial park system please visit the Manitoba Parks website. The Manitoba Parks digital boundary layer was first created in 1997. The boundaries of this layer are delineated using best available maps, data, and Director of Survey Plans. However, this layer is not to be used as a legal definition. Please obtain a Director of Surveys plan from GeoManitoba, Director of Surveys Office for defining legal boundaries. Fields Included — FIELD_NAME (Alias): NAME_E (Park Name)The name of the provincial park. NOM_F (Le nom du parc)        Le nom du parc provincial. BIOME (Ecosystem Type)         Ecosystem Type: M = Marine or T = Terrestrial O_AREA (Total Park Area (ha))  Official Area in Hectares - the official area of the provincial park according to Director of Survey plans and legal descriptions. LOC_E (Province)           The geographical location (province) of the provincial park. LOC_F (Province)           L'emplacement géographique (province) du parc provincial. TYPE_E (Park Type)     The type of Provincial Park as set out by Manitoba's legislation. TYPE_F (Le type du parc)       Le type du parc provincial établi par la législation de Manitoba. MGMT_E (Managing Agency)  The managing agency for the provincial park. MGMT_F (L'agence gérant)    L'agence gérant du parc provincial. LEGISL_E (Legislation)Current legislation under which the provincial park is established. LEGISL_F (La législation)   La législation actuelle sous qui parc provincial est établi. STATUS_E (Protection Status)   The status field describes the current legal state of protection under law. STATUS_F (Statut de protection)  Statut de protection du parc provincial. PROTDATE (Protection Date) Protection Date - Manitoba regulation date first legally protecting and designating the protected area. YR_PP_DES (Established)Year Provincial Park Designated: year the provincial park was first legally designated through regulation. OWNER_E (Provincial Park Owner)   Describes the agency/organization/individual who owns the provincial park. OWNER_F (Le propriétaire du parc provincial)   Décrit l'agence/l'organisation/l'individu qui est le propriétaire du parc provincial. PRK_CLSS (Classification)   Park Classification - defines a park's role in the Manitoba provincial park system. PR_EXP (Park Reserve Expiry Date)      Park Reserve Expiry Date – date that park reserve status expires D_OF_S (Director of Survey Plan)        Director of Survey Plan Number - unique legal survey plan number also referred to in the provincial park description regulation. OIC_NM (Order in Council)       Order in Council Number - reflects all the Order in Council numbers associated with the park. MB_RG_NM (Regulation Number) Manitoba Regulation Number - the number of the regulation that legally designates a parcel of land; Reflects all the legal designations associated with the park. MB_RG_D (Manitoba Regulation Date)  Manitoba Regulation Date - the date of the regulation that legally designates a parcel of land as protected. GAZDATE (Gazette Date)    Gazette Date - public registry date of most current protected designation; current park reserve date of interim protection. O_OF_M_D (Order of Minister)Order of Minister Date - the date on which the Minister signed the order to withdraw crown mineral rights from a land parcel. MN_RG_NM (Mines Regulation Number) Manitoba Mines Regulation Number - the number of the regulation that officially states that crown mineral rights have been withdrawn from a land parcel. MN_GZ_D (Mining Gazette Date)     Public registry date of the mining regulation that withdraws mineral rights from the land parcel. MN_RG_D (Mining Regulation Date) Mining Regulation Date - date of the mines regulation that withdraws crown mineral rights from a land parcel. COMMENTS (Comments)General Comments - special notes about a provincial park. URL (Website)               Universal Resource Locator- Parks and Protected Spaces website link.

Yukon parks and protected areas captured using the National Topographic Base (NTDB) 1:250,000 scale dataset. Boundaries were generalized from survey information captured by Legal Survey Division of Natural Resources Canada (NRCan).Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

Location of parks and green spaces in the City of Rimouski**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

A Public Right Area Object representing the spatial extent of a protected landscape as a result of the public interest or common good. These areas can include habitat, wilderness areas and other special management areas. This cadastral framework provides a parcel base of properly structured vector data designed and suited for Geographical Information System (GIS) application and can be used for land management purposes. This data set is not be used for defining boundaries. Administrative decisions should be based on legal documents and legal survey plans.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)