On July 6, a train of 72 cars, carrying 100 tons of crude oil each, exploded in Lac-Mégantic. A high-resolution aerial photograph was collected by Aéro-Photo after the train derailment. This aerial photograph was provided and georeferenced by Aéro-Photo (1961) inc. Purpose: This aerial photograph makes it possible to identify the impact radius of the accident. The image web service (WMS) is offered as an open service. However, to obtain the raw image, please contact Aéro-Photo (1961) inc.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

To outline the locations of buildings on Parks Canada sites, buildings that Parks Canada manages, and other buildings of interest to Parks Canada. Polygon file to map building footprints of buildings on Parks Canada sites. Footprints may be derived by tracing the roof outline (for example from an airphoto) or using more detailed measurements of the ground floor.Data is not necessarily complete - updates will occur weekly.

Location of centre points of Yukon aerial photographs. Data was produced from heads up digitization of paper flightline index mapsDistributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

Photographs of the seabed have been collected during marine expeditions of the Geological Survey of Canada Atlantic and Pacific for over 50 years. Typically, a sequence of 10 to 20 photos are taken at a single station as the vessel drifts with prevailing winds and currents and the camera is repeatedly lowered to and raised from the seafloor. The suite of photos from each station may best be considered a representative ensemble from the proximal area. Only in the more recent expeditions, where differential GPS and ultra-short baseline positioning is used in camera positioning, is the relative positional information given for each photo meaningful in interpreting the sequence as a transect. Reduced-scale, thumbnail photos are displayed for the sequence of photos taken at each station. Each photo is labelled with the expedition id, the station number and the photo number.

This point layer dataset contains information on Manitoba waterbody access points including boat launches, overland routes and tunnels.Waterbody Entry Points contains point data primarily of boat launches in Manitoba, but it also includes overland routes and tunnel access to some waterbodies. Each data point has a description of the type of access as well as photos that detail signage and condition of the entry point. The waterbody entry points layer, along with related information, can be found at the Manitoba Lake Information For Anglers app. The project was initiated by Manitoba Wildlife and Fisheries Branch with funding from the Fish and Wildlife Enhancement Fund. Data is provided by Manitoba Wildlife and Fisheries Branch, Swan Valley Sport Fishing and Manitoba Watershed Districts. For additional information visit Manitoba Fisheries. The dataset includes the following fields (Alias (Name): Description) Waterbody ID (WATERBODY_ID): Unique identifier for an individual waterbody. Waterbody Name (WATERBODY_NAME): Name of the waterbody that the entry point belongs to. Entry Type (ENTRY_TYPE): Indicates the type of entry point (e.g. boat launch, tunnel). Photo 1 (PHOTO_1): Link to a photo of the launch/entry point. Photo 2 (PHOTO_2): Link to a photo of the launch/entry point. Photo 3 (PHOTO_3): Link to a photo of the launch/entry point. Long (DD) (LONG_DD): Longitudinal coordinates of the feature in decimal degrees. Lat (DD) (LAT_DD): Latitudinal coordinates of the feature in decimal degrees.

Note: To visualize the data in the viewer, zoom into the area of interest. The National Air Photo Library (NAPL) of Natural Resources Canada archives over 6 million aerial photographs covering all of Canada, some of which date back to the 1920s.This collection includes Time Series of aerial orthophoto mosaics over a selection of major cities or targeted areas that allow the observation of various changes that occur over time in those selected regions.These mosaics are disseminated through the Data Cube Platform implemented by NRCan using geospatial big data management technologies. These technologies enable the rapid and efficient visualization of high-resolution geospatial data and allow for the rapid generation of dynamically derived products. The data is available as Cloud Optimized GeoTIFF (COG) for direct access and as Web Map Services (WMS) or Web Coverage Services (WCS) with a temporal dimension for consumption in Web or GIS applications. The NAPL mosaics are made from the best spatial resolution available for each time period, which means that the orthophotos composing a NAPL Time Series are not necessarily coregistrated. For this dataset, the spatial resolutions are: 100 cm for the year 1947 and 50 cm for the year 1967.The NAPL indexes and stores federal aerial photography for Canada, and maintains a comprehensive historical archive and public reference centre. The Earth Observation Data Management System (EODMS) online application allows clients to search and retrieve metadata for over 3 million out of 6 million air photos.The EODMS online application enables public and government users to search and order raw Government of Canada Earth Observation images and archived products managed by NRCan such as aerial photos and satellite imagery. To access air photos, you can visit the EODMS web site: https://eodms-sgdot.nrcan-rncan.gc.ca/index-en.html

Note: To visualize the data in the viewer, zoom into the area of interest.The National Air Photo Library (NAPL) of Natural Resources Canada archives over 6 million aerial photographs covering all of Canada, some of which date back to the 1920s.This collection includes Time Series of aerial orthophoto mosaics over a selection of major cities or targeted areas that allow the observation of various changes that occur over time in those selected regions.These mosaics are disseminated through the Data Cube Platform implemented by NRCan using geospatial big data management technologies. These technologies enable the rapid and efficient visualization of high-resolution geospatial data and allow for the rapid generation of dynamically derived products. The data is available as Cloud Optimized GeoTIFF (COG) files for direct access and as Web Map Services (WMS) or Web Coverage Services (WCS) with a temporal dimension for consumption in Web or GIS applications. The NAPL mosaics are made from the best spatial resolution available for each time period, which means that the orthophotos composing a NAPL Time Series are not necessarily coregistered. For this dataset, the spatial resolutions vary from 10 cm to 50 cm.The NAPL indexes and stores federal aerial photography for Canada, and maintains a comprehensive historical archive and public reference centre. The Earth Observation Data Management System (EODMS) online application allows clients to search and retrieve metadata for over 3 million out of 6 million air photos.The EODMS online application enables public and government users to search and order raw Government of Canada Earth Observation images and archived products managed by NRCan such as aerial photos and satellite imagery. To access air photos, you can visit the EODMS web site: https://eodms-sgdot.nrcan-rncan.gc.ca/index-en.html

Note: To visualize the data in the viewer, zoom into the area of interest. The National Air Photo Library (NAPL) of Natural Resources Canada archives over 6 million aerial photographs covering all of Canada, some of which date back to the 1920s.This collection includes Time Series of aerial orthophoto mosaics over a selection of major cities or targeted areas that allow the observation of various changes that occur over time in those selected regions.These mosaics are disseminated through the Data Cube Platform implemented by NRCan using geospatial big data management technologies. These technologies enable the rapid and efficient visualization of high-resolution geospatial data and allow for the rapid generation of dynamically derived products. The data is available as Cloud Optimized GeoTIFF (COG) files for direct access and as Web Map Services (WMS) or Web Coverage Services (WCS) with a temporal dimension for consumption in Web or GIS applications. The NAPL mosaics are made from the best spatial resolution available for each time period, which means that the orthophotos composing a NAPL Time Series are not necessarily coregistered. For this dataset, the spatial resolutions are: 100 cm for the year 1947 and 50 cm for the year 1977.The NAPL indexes and stores federal aerial photography for Canada, and maintains a comprehensive historical archive and public reference centre. The Earth Observation Data Management System (EODMS) online application allows clients to search and retrieve metadata for over 3 million out of 6 million air photos.The EODMS online application enables public and government users to search and order raw Government of Canada Earth Observation images and archived products managed by NRCan such as aerial photos and satellite imagery. To access air photos, you can visit the EODMS web site: https://eodms-sgdot.nrcan-rncan.gc.ca/index-en.html

Canada’s NFI survey was designed to provide an unbiased probability sample of Canada’s forests for long-term strategic monitoring purposes. The target population is Canada’s entire non-Arctic land area. A National Terrestrial Monitoring Framework (NTMF) was created by establishing a systematic 4 km by 4 km sampling grid over all of Canada from a random offshore point. Prior to T0, NFI partners determined that the NFI program would be able to affordably achieve its mission by establishing a 2 km by 2 km (400 ha) “photo plot” at every fifth sampling point on the NTMF (i.e. every 20 km), thereby providing a one percent sample of the target population. This sampling intensity was considered sufficient for national reporting and possible to sustain over the long term with anticipated funding.Photo plots were established across Canada during 2000-2006 (T0). There are 26,139 photo plot survey locations on the 20 km by 20 km grid, of which 18,570 lie inside the target population area. For each photo plot, information is collected on land cover, land use, ownership and protection status.NFI photo plot survey data are stratified by “NFI Unit” for standard estimation and reporting purposes. NFI Units were created by the geographic intersection of Canada’s 10 provinces, 3 territories and 12 non-Arctic terrestrial ecozones. Estimates produced for NFI Units are rolled up to produce standard reports for ecozones, jurisdictions (provinces and territories) and Canada. Some NFI Units are too small to produce robust estimates for with the current sampling intensity, so NFI Unit estimates are not publicly reported. Prince Edward Island (PEI) Atlantic Maritime, for example, is PEI’s only NFI Unit and it is small (1% sampling intensity achieved with only 19 photo plots), so the NFI avoids publishing provincial reports. Information consumers are encouraged to use official statistics produced by provincial and territorial governments for the forests in their jurisdictions. Most provinces are large, however, and the current NFI sampling intensity is sufficient for producing robust NFI reports for those jurisdictions. Special estimation reports can be produced using different ecological or administrative strata, such as the Boreal Zone, or the Managed Forest.NFI photo plots are surveyed on a ten-year cycle. During first re-measurement (T1; 2008-2017), survey intensity was reduced to one photo plot every 40 km across northern Canada (Figure 3) because of budget limitations. The T2 survey (2018-2027) is currently underway.

Canada’s NFI survey was designed to provide an unbiased probability sample of Canada’s forests for long-term strategic monitoring purposes. The target population is Canada’s entire non-Arctic land area. A National Terrestrial Monitoring Framework (NTMF) was created by establishing a systematic 4 km by 4 km sampling grid over all of Canada from a random offshore point. Prior to T0, NFI partners determined that the NFI program would be able to affordably achieve its mission by establishing a 2 km by 2 km (400 ha) “photo plot” at every fifth sampling point on the NTMF (i.e. every 20 km), thereby providing a one percent sample of the target population. This sampling intensity was considered sufficient for national reporting and possible to sustain over the long term with anticipated funding.Photo plots were established across Canada during 2000-2006 (T0). There are 26,139 photo plot survey locations on the 20 km by 20 km grid, of which 18,570 lie inside the target population area. For each photo plot, information is collected on land cover, land use, ownership and protection status.NFI photo plot survey data are stratified by “NFI Unit” for standard estimation and reporting purposes. NFI Units were created by the geographic intersection of Canada’s 10 provinces, 3 territories and 12 non-Arctic terrestrial ecozones. Estimates produced for NFI Units are rolled up to produce standard reports for ecozones, jurisdictions (provinces and territories) and Canada. Some NFI Units are too small to produce robust estimates for with the current sampling intensity, so NFI Unit estimates are not publicly reported. Prince Edward Island (PEI) Atlantic Maritime, for example, is PEI’s only NFI Unit and it is small (1% sampling intensity achieved with only 19 photo plots), so the NFI avoids publishing provincial reports. Information consumers are encouraged to use official statistics produced by provincial and territorial governments for the forests in their jurisdictions. Most provinces are large, however, and the current NFI sampling intensity is sufficient for producing robust NFI reports for those jurisdictions. Special estimation reports can be produced using different ecological or administrative strata, such as the Boreal Zone, or the Managed Forest.NFI photo plots are surveyed on a ten-year cycle. During first re-measurement (T1; 2008-2017), survey intensity was reduced to one photo plot every 40 km across northern Canada (Figure 3) because of budget limitations. The T2 survey (2018-2027) is currently underway.