On July 6, a train of 72 cars, carrying 100 tons of crude oil each, exploded in Lac-Mégantic. A high-resolution aerial photograph was collected by Aéro-Photo after the train derailment. This aerial photograph was provided and georeferenced by Aéro-Photo (1961) inc. Purpose: This aerial photograph makes it possible to identify the impact radius of the accident. The image web service (WMS) is offered as an open service. However, to obtain the raw image, please contact Aéro-Photo (1961) inc.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

The Geomatics Division archives contain over 22,000 aerial photographs. The oldest date from 1930, but they are generally located between 1950 and 2003. The set provides a link to an interactive map allowing the download of aerial photographs from multiple years held by the City for the purposes of producing basic cartography. The images are available throughout the island of Montreal or partially depending on the years and scales of aerial photographs. An aerial photograph is a photograph taken from the air. Normally, these are taken vertically, on board an aircraft, using a highly accurate camera. NOTE1: The collection of the Geomatics Division is distinct from that of the Archives de Montréal. NOTE2: The City distributes the photographs in its possession. However, in the event that a claimant has claims on this subject, he is invited to submit them to the City. NOTE3: Note that for paper-based archival images, the City generally does not have the original slides. Refer to the index for details.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

Location of flight lines of Yukon aerial photographs. Data was produced from heads up digitization of paper flight line index maps . Distributed from GeoYukon by the Government of Yukon . Discover more digital map data and interactive maps from Yukon's digital map data collection. For more information: geomatics.help@yukon.ca

The field plots were used to help during the photo interpretation process. The plots provided essential information to interpreters to relate photo observed attributes with field measurements. The use of ground-truthing (field plots) to cross check the accuracy of the aerial photography data is a common method.

To support a wide range of efforts to understand the geographic context and historical conditions of the Indian residential schools sites for a wide range of stakeholders, Indigenous Services Canada has created a Web service to access and visualize historical aerial photography for those sites. The Historical aerial photography of Indian residential schools dataset contains digital scans of aerial photographs that were acquired from 1924 to 1998 over Indian Residential school sites and surrounding areas across Canada, as well as basic information about each photography and depicted site. The digital images were georeferenced, to match ground coordinates, saved in a resampled uncompressed raster format and compiled in a single mosaic layer. The dataset does not include the complete range of aerial photographs of each site. Instead, an attempt has been made to select a single optimal photograph for each site based on good photographic quality and the site's years of operation. In some cases no photograph is available, and in others a photograph was only available after the years of operation. The source scanned prints was obtained from the archives of the National Air Photo Library (NAPL) of Natural Resources Canada (NRCAN). This dataset should be considered evergreen as new information and photography sources are identified.It should be noted that this dataset can only be downloaded using ArcGIS and ArcPro software as well as other GIS software.

###**New aerial images released for free! **### All orthophotographic mosaics produced since 2002, in order to meet the needs related to the ecoforest inventory of southern Quebec (IEQM), are now available as open data. For more information on this product, please refer to the fact sheet ** [Historic Airborne Forest Imagery] (https://www.donneesquebec.ca/recherche/dataset/imagerie-historique) **. To download them, please consult the ** [download map] (https://imagerie-telechargement.portailcartographique.gouv.qc.ca/) **. **** Orthophotographic mosaics present an aerial view of Quebec territory at different times. Each image has been analytically straightened to eliminate inaccuracies caused by the camera being tilted at the time of shooting or by the image being moved due to terrain. These collections are the result of governmental and regional initiatives, namely: * The Ecoforest Inventory of Southern Quebec (IEQM) * Partnerships between ministries, agencies and municipal communities Their download is free, as they were acquired under an open data license (** [Creative Commons 4.0] (https://www.donneesquebec.ca/licence/) **). Three formats are available depending on the territory: JPEG 2000, ECW and GeoTIFF. For product ownership information (resolution, image type, etc.), please refer to the information for each mosaic available in the ** [download card] (https://imagerie-telechargement.portailcartographique.gouv.qc.ca/) **. For more information on priced aerial imagery, please consult the sheet ** [aerial imagery] (https://mern.gouv.qc.ca/repertoire-geographique/imagerie-aerienne/) ** in the “Maps and Geographic Information” section of the Ministry of Energy and Natural Resources website.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

This service contains aerial photographs for selected areas in the Yukon dating from 1988 to 2015. All imagery in this service is publicly available, and can be made available on request. Please email Geomatics.Help@gov.yk.ca if you have any questions about Yukon government aerial photographs, or this image service. This service is managed by the Geomatics Yukon unit.

Forest Total Aboveground Biomass 2015Total aboveground biomass. Individual tree total aboveground biomass is calculated using species-specific equations. In the measured ground plots, aboveground biomass per hectare is calculated by summing the values of all trees within a plot and dividing by the area of the plot. Aboveground biomass may be separated into various biomass components (e.g. stem, bark, branches, foliage) (units = t/ha). Products relating the structure of Canada's forested ecosystems have been generated and made openly accessible. The shared products are based upon peer-reviewed science and relate aspects of forest structure including: (i) metrics calculated directly from the lidar point cloud with heights normalized to heights above the ground surface (e.g., canopy cover, height), and (ii) modelled inventory attributes, derived using an area-based approach generated by using co-located ground plot and ALS data (e.g., volume, biomass). Forest structure estimates were generated by combining information from lidar plots (Wulder et al. 2012) with Landsat pixel-based composites (White et al. 2014; Hermosilla et al. 2016) using a nearest neighbour imputation approach with a Random Forests-based distance metric. These products were generated for strategic-level forest monitoring information needs and are not intended to support operational-level forest management. All products have a spatial resolution of 30 m. For a detailed description of the data, methods applied, and accuracy assessment results see Matasci et al. (2018). When using this data, please cite as follows: Matasci, G., Hermosilla, T., Wulder, M.A., White, J.C., Coops, N.C., Hobart, G.W., Bolton, D.K., Tompalski, P., Bater, C.W., 2018b. Three decades of forest structural dynamics over Canada's forested ecosystems using Landsat time-series and lidar plots. Remote Sensing of Environment 216, 697-714. Matasci et al. 2018)Geographic extent: Canada's forested ecosystems (~ 650 Mha)Time period: 1985–2011

Orthophotography of the territory of the MRC of Drummond in Center-du-Québec**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

The Ontario Raw Point Cloud (Imagery-Derived) is elevation point cloud data created from aerial photography from the Geospatial Ontario (GEO) imagery program. It was created using a pixel-autocorrelation process based on aerial photography collected by the imagery contractor for the GEO imagery program. The dataset consists of overlapping tiles in LAZ format and is 6.29 terabytes in size. Tiles are overlapping because the pixel-autocorrelation process extracts elevation values from overlapping stereo photo strips. No classification has been applied to the point cloud, however they are encoded with colour (RGB) values from the source photography. This data is for geospatial tech specialists, and is used by government, municipalities, conservation authorities and the private sector for land use planning and environmental analysis. __Related data__ For a product in non-overlapping tiles with a ground classification applied, see the [Ontario Classified Point Cloud (Imagery-Derived)](https://geohub.lio.gov.on.ca/datasets/febf17330adb4100a22738e1684b5feb). Raster derivatives have been created from the point clouds for some imagery projects. These products may meet your needs and are available for direct download. For a representation of bare earth, see [Ontario Digital Elevation Model (Imagery-Derived)](https://geohub.lio.gov.on.ca/maps/mnrf::ontario-digital-elevation-model-imagery-derived/about). For a model representing all surface features, see the [Ontario Digital Surface Model (Imagery-Derived)](https://geohub.lio.gov.on.ca/maps/mnrf::ontario-digital-surface-model-imagery-derived/about).