Canada's National Forest Inventory ground plots are a stratified random sample of select Canadian terrestrial ecozones. Ground plots are remeasured periodically. Data from ground plots include field measurements, compiled attributes and descriptions made at a point inside or adjacent to a photo plot. Ground plot data include individual large-tree and small-tree measurements, shrub tallies, understory vegetation sampling, vegetation cover, stump assessments, woody debris data, surface substrates, site descriptions and soil measurements.

Canada’s NFI survey was designed to provide an unbiased probability sample of Canada’s forests for long-term strategic monitoring purposes. The target population is Canada’s entire non-Arctic land area. A National Terrestrial Monitoring Framework (NTMF) was created by establishing a systematic 4 km by 4 km sampling grid over all of Canada from a random offshore point. Prior to T0, NFI partners determined that the NFI program would be able to affordably achieve its mission by establishing a 2 km by 2 km (400 ha) “photo plot” at every fifth sampling point on the NTMF (i.e. every 20 km), thereby providing a one percent sample of the target population. This sampling intensity was considered sufficient for national reporting and possible to sustain over the long term with anticipated funding.Photo plots were established across Canada during 2000-2006 (T0). There are 26,139 photo plot survey locations on the 20 km by 20 km grid, of which 18,570 lie inside the target population area. For each photo plot, information is collected on land cover, land use, ownership and protection status.NFI photo plot survey data are stratified by “NFI Unit” for standard estimation and reporting purposes. NFI Units were created by the geographic intersection of Canada’s 10 provinces, 3 territories and 12 non-Arctic terrestrial ecozones. Estimates produced for NFI Units are rolled up to produce standard reports for ecozones, jurisdictions (provinces and territories) and Canada. Some NFI Units are too small to produce robust estimates for with the current sampling intensity, so NFI Unit estimates are not publicly reported. Prince Edward Island (PEI) Atlantic Maritime, for example, is PEI’s only NFI Unit and it is small (1% sampling intensity achieved with only 19 photo plots), so the NFI avoids publishing provincial reports. Information consumers are encouraged to use official statistics produced by provincial and territorial governments for the forests in their jurisdictions. Most provinces are large, however, and the current NFI sampling intensity is sufficient for producing robust NFI reports for those jurisdictions. Special estimation reports can be produced using different ecological or administrative strata, such as the Boreal Zone, or the Managed Forest.NFI photo plots are surveyed on a ten-year cycle. During first re-measurement (T1; 2008-2017), survey intensity was reduced to one photo plot every 40 km across northern Canada (Figure 3) because of budget limitations. The T2 survey (2018-2027) is currently underway.

Canada’s NFI survey was designed to provide an unbiased probability sample of Canada’s forests for long-term strategic monitoring purposes. The target population is Canada’s entire non-Arctic land area. A National Terrestrial Monitoring Framework (NTMF) was created by establishing a systematic 4 km by 4 km sampling grid over all of Canada from a random offshore point. Prior to T0, NFI partners determined that the NFI program would be able to affordably achieve its mission by establishing a 2 km by 2 km (400 ha) “photo plot” at every fifth sampling point on the NTMF (i.e. every 20 km), thereby providing a one percent sample of the target population. This sampling intensity was considered sufficient for national reporting and possible to sustain over the long term with anticipated funding.Photo plots were established across Canada during 2000-2006 (T0). There are 26,139 photo plot survey locations on the 20 km by 20 km grid, of which 18,570 lie inside the target population area. For each photo plot, information is collected on land cover, land use, ownership and protection status.NFI photo plot survey data are stratified by “NFI Unit” for standard estimation and reporting purposes. NFI Units were created by the geographic intersection of Canada’s 10 provinces, 3 territories and 12 non-Arctic terrestrial ecozones. Estimates produced for NFI Units are rolled up to produce standard reports for ecozones, jurisdictions (provinces and territories) and Canada. Some NFI Units are too small to produce robust estimates for with the current sampling intensity, so NFI Unit estimates are not publicly reported. Prince Edward Island (PEI) Atlantic Maritime, for example, is PEI’s only NFI Unit and it is small (1% sampling intensity achieved with only 19 photo plots), so the NFI avoids publishing provincial reports. Information consumers are encouraged to use official statistics produced by provincial and territorial governments for the forests in their jurisdictions. Most provinces are large, however, and the current NFI sampling intensity is sufficient for producing robust NFI reports for those jurisdictions. Special estimation reports can be produced using different ecological or administrative strata, such as the Boreal Zone, or the Managed Forest.NFI photo plots are surveyed on a ten-year cycle. During first re-measurement (T1; 2008-2017), survey intensity was reduced to one photo plot every 40 km across northern Canada (Figure 3) because of budget limitations. The T2 survey (2018-2027) is currently underway.

Canada’s NFI survey was designed to provide an unbiased probability sample of Canada’s forests for long-term strategic monitoring purposes. The target population is Canada’s entire non-Arctic land area. A National Terrestrial Monitoring Framework (NTMF) was created by establishing a systematic 4 km by 4 km sampling grid over all of Canada from a random offshore point. Prior to T0, NFI partners determined that the NFI program would be able to affordably achieve its mission by establishing a 2 km by 2 km (400 ha) “photo plot” at every fifth sampling point on the NTMF (i.e. every 20 km), thereby providing a one percent sample of the target population. This sampling intensity was considered sufficient for national reporting and possible to sustain over the long term with anticipated funding.Photo plots were established across Canada during 2000-2006 (T0). There are 26,139 photo plot survey locations on the 20 km by 20 km grid, of which 18,570 lie inside the target population area. For each photo plot, information is collected on land cover, land use, ownership and protection status.NFI photo plot survey data are stratified by “NFI Unit” for standard estimation and reporting purposes. NFI Units were created by the geographic intersection of Canada’s 10 provinces, 3 territories and 12 non-Arctic terrestrial ecozones. Estimates produced for NFI Units are rolled up to produce standard reports for ecozones, jurisdictions (provinces and territories) and Canada. Some NFI Units are too small to produce robust estimates for with the current sampling intensity, so NFI Unit estimates are not publicly reported. Prince Edward Island (PEI) Atlantic Maritime, for example, is PEI’s only NFI Unit and it is small (1% sampling intensity achieved with only 19 photo plots), so the NFI avoids publishing provincial reports. Information consumers are encouraged to use official statistics produced by provincial and territorial governments for the forests in their jurisdictions. Most provinces are large, however, and the current NFI sampling intensity is sufficient for producing robust NFI reports for those jurisdictions. Special estimation reports can be produced using different ecological or administrative strata, such as the Boreal Zone, or the Managed Forest.NFI photo plots are surveyed on a ten-year cycle. During first re-measurement (T1; 2008-2017), survey intensity was reduced to one photo plot every 40 km across northern Canada (Figure 3) because of budget limitations. The T2 survey (2018-2027) is currently underway.

Multi-Agency Ground Plot (MAGPlot) database (DB) is a pan-Canadian forest ground-plot data repository. The database synthesize forest ground plot data from various agencies, including the National Forest Inventory (NFI) and 12 Canadian jurisdictions: Alberta (AB), British Columbia (BC), Manitoba (MB), New Brunswick (NB), Newfoundland and Labrador (NL), Nova Scotia (NS), Northwest Territories (NT), Ontario (ON), Prince Edward Island (PE), Quebec (QC), Saskatchewan (SK), and Yukon Territory (YT), contributed in their original format. These datasets underwent data cleaning and quality assessment using the set of rules and standards set by the contributors and associated documentations, and were standardized, harmonized, and integrated into a single, centralized, and analysis-ready database. The primary objective of the MAGPlot project is to collate and harmonize forest ground plot data and to present the data in a findable, accessible, interoperable, and reusable (FAIR) format for pan-Canadian forest research. The current version includes both historical and contemporary forest ground plot data provided by data contributors. The standardized and harmonized dataset includes eight data tables (five site related and three tree measurement tables) in a relational database schema. Site-related tables contain information on geographical locations, treatments (e.g. stand tending, regeneration, and cutting), and disturbances caused by abiotic factors (e.g., weather, wildfires) or biotic factors (e.g., disease, insects, animals). Tree-related tables, on the other hand, focus on measured tree attributes, including biophysical and growth parameters (e.g., DBH, height, crown class), species, status, stem conditions (e.g., broken or dead tops), and health conditions. While most contributors provided large and small tree plot measurements, only NFI, AB, MB, and SK contributed datasets reported at regeneration plot level (e.g., stem count, regeneration species). Future versions are expected to include updated and/or new measurement records as well as additional tables and measured and compiled (e.g., tree volume and biomass) attributes. MAGPlot is hosted through Canada’s National Forest Information System (https://nfi.nfis.org/en/maps). ---------------------------------------------------LATEST SITE TREATMENTS LAYER:---------------------------------------------------Shows the most recently applied treatment class for each MAGPlot site. These treatment classes are broad categories, with more specific treatment details available in the full dataset.-----------NOTES:----------- The MAGPlot release (v1.0 and v1.1) does not include NL and SK datasets due to pending Data Sharing Agreements, ongoing data processing, or restrictions on third-party sharing. These datasets will be included in future releases. While certain jurisdictions permit open or public data sharing, given that requestor signs and adheres the Data Use agreement, there are some jurisdictions that require a jurisdiction-specific request form to be signed in addition to the Data Use Agreement form. For the MAGPlot Data Dictionary, other metadata, datasets available for open sharing (with approximate locations), data requests (for other datasets or exact coordinates), and available data visualization products, please check all the folders in the “Data and Resources” section below. Coordinates in web services have been randomized within 5km of true location to preserve site integrityAccess the WMS (Web Map Service) layers from the “Data and Resources” section below. A data request must be submitted to access historical datasets, datasets restricted by data-use agreements, or exact plot coordinates using the link below.NFI Data Request Form: https://nfi.nfis.org/en/datarequestform---------------------------------ACKNOWLEDGEMENT:--------------------------------- We acknowledge and recognize the following agencies that have contributed data to the MAGPlot database: Government of Alberta - Ministry of Agriculture, Forestry, and Rural Economic Development - Forest Stewardship and Trade Branch Government of British Columbia - Ministry of Forests - Forest Analysis and Inventory Branch Government of Manitoba - Ministry of Economic, Development, Investment, Trade, and Natural Resources - Forestry and Peatlands Branch Government of New Brunswick - Ministry of Natural Resources and Energy Development - Forestry Division, Forest Planning and Stewardship Branch Government of Newfoundland & Labrador - Department of Fisheries, Forestry and Agriculture - Forestry Branch Government of Nova Scotia - Ministry of Natural Resources and Renewables - Department of Natural Resources and Renewables Government of Northwest Territories - Department of Environment & Climate Change - Forest Management Division Government of Ontario - Ministry of Natural Resources and Forestry - Science and Research Branch, Forest Resources Inventory Unit Government of Prince Edward Island - Department of Environment, Energy, and Climate Action - Forests, Fish, and Wildlife Division Government of Quebec - Ministry of Natural Resources and Forests - Forestry Sector Government of Saskatchewan - Ministry of Environment - Forest Service Branch Government of Yukon - Ministry of Energy, Mines, and Resources - Forest Management Branch Government of Canada - Natural Resources Canada - Canadian Forest Service - National Forest Inventory Projects Office

Canada’s NFI survey was designed to provide an unbiased probability sample of Canada’s forests for long-term strategic monitoring purposes. The target population is Canada’s entire non-Arctic land area. A National Terrestrial Monitoring Framework (NTMF) was created by establishing a systematic 4 km by 4 km sampling grid over all of Canada from a random offshore point. Prior to T0, NFI partners determined that the NFI program would be able to affordably achieve its mission by establishing a 2 km by 2 km (400 ha) “photo plot” at every fifth sampling point on the NTMF (i.e. every 20 km), thereby providing a one percent sample of the target population. This sampling intensity was considered sufficient for national reporting and possible to sustain over the long term with anticipated funding.Photo plots were established across Canada during 2000-2006 (T0). There are 26,139 photo plot survey locations on the 20 km by 20 km grid, of which 18,570 lie inside the target population area. For each photo plot, information is collected on land cover, land use, ownership and protection status.NFI photo plot survey data are stratified by “NFI Unit” for standard estimation and reporting purposes. NFI Units were created by the geographic intersection of Canada’s 10 provinces, 3 territories and 12 non-Arctic terrestrial ecozones. Estimates produced for NFI Units are rolled up to produce standard reports for ecozones, jurisdictions (provinces and territories) and Canada. Some NFI Units are too small to produce robust estimates for with the current sampling intensity, so NFI Unit estimates are not publicly reported. Prince Edward Island (PEI) Atlantic Maritime, for example, is PEI’s only NFI Unit and it is small (1% sampling intensity achieved with only 19 photo plots), so the NFI avoids publishing provincial reports. Information consumers are encouraged to use official statistics produced by provincial and territorial governments for the forests in their jurisdictions. Most provinces are large, however, and the current NFI sampling intensity is sufficient for producing robust NFI reports for those jurisdictions. Special estimation reports can be produced using different ecological or administrative strata, such as the Boreal Zone, or the Managed Forest.NFI photo plots are surveyed on a ten-year cycle. During first re-measurement (T1; 2008-2017), survey intensity was reduced to one photo plot every 40 km across northern Canada (Figure 3) because of budget limitations. The T2 survey (2018-2027) is currently underway.

Canada’s NFI survey was designed to provide an unbiased probability sample of Canada’s forests for long-term strategic monitoring purposes. The target population is Canada’s entire non-Arctic land area. A National Terrestrial Monitoring Framework (NTMF) was created by establishing a systematic 4 km by 4 km sampling grid over all of Canada from a random offshore point. Prior to T0, NFI partners determined that the NFI program would be able to affordably achieve its mission by establishing a 2 km by 2 km (400 ha) “photo plot” at every fifth sampling point on the NTMF (i.e. every 20 km), thereby providing a one percent sample of the target population. This sampling intensity was considered sufficient for national reporting and possible to sustain over the long term with anticipated funding.Photo plots were established across Canada during 2000-2006 (T0). There are 26,139 photo plot survey locations on the 20 km by 20 km grid, of which 18,570 lie inside the target population area. For each photo plot, information is collected on land cover, land use, ownership and protection status.NFI photo plot survey data are stratified by “NFI Unit” for standard estimation and reporting purposes. NFI Units were created by the geographic intersection of Canada’s 10 provinces, 3 territories and 12 non-Arctic terrestrial ecozones. Estimates produced for NFI Units are rolled up to produce standard reports for ecozones, jurisdictions (provinces and territories) and Canada. Some NFI Units are too small to produce robust estimates for with the current sampling intensity, so NFI Unit estimates are not publicly reported. Prince Edward Island (PEI) Atlantic Maritime, for example, is PEI’s only NFI Unit and it is small (1% sampling intensity achieved with only 19 photo plots), so the NFI avoids publishing provincial reports. Information consumers are encouraged to use official statistics produced by provincial and territorial governments for the forests in their jurisdictions. Most provinces are large, however, and the current NFI sampling intensity is sufficient for producing robust NFI reports for those jurisdictions. Special estimation reports can be produced using different ecological or administrative strata, such as the Boreal Zone, or the Managed Forest.NFI photo plots are surveyed on a ten-year cycle. During first re-measurement (T1; 2008-2017), survey intensity was reduced to one photo plot every 40 km across northern Canada (Figure 3) because of budget limitations. The T2 survey (2018-2027) is currently underway.

This layer is the authoritative source for locating Active Status Growth and Yield plots also known as Permanent Sample Plots (PSPs). These plots are protected and require an additional minimum windfirm buffer of 50m radius in the interior and 100m radius on the coast. These plots are generally 16m radius fixed area plots. Therefore, protected areas need to be a minimum of 66m radius around the plot centre in the interior and 116m radius on the coast. Best practices are to locate the plot centre on the ground as coordinate accuracy varies. The program now maintains partially damaged plots in order to provide critical data on how partially damaged plots grow over time. Therefore, salvage logging is NOT permitted within protected plots. Please contact Anya Reid (Anya.Reid@gov.bc.ca) with questions or updated coordinates for plots. NOTE: Accuracy of the coordinates are variable. Coordinates for plots with a more recent (since 2000) last measurement are generally quite accurate (3m). However, plots measured in the 1990's have a wide range of coordinate accuracy. In all cases, it is necessary to ground truth plot location before block layout. In this spatial layer, low accuracy coordinates are buffered 300m to ensure they do not get missed from development planning. This layer replaces the [Growth and Yield Samples – Active Status](https://catalogue.data.gov.bc.ca/dataset/0ca49478-5d0f-44e8-b6af-3fd6e387803c) layer with more accurate and current information from the Inventory Sample Management Consolidation (ISMC) database.

Multi-Agency Ground Plot (MAGPlot) database (DB) is a pan-Canadian forest ground-plot data repository. The database synthesize forest ground plot data from various agencies, including the National Forest Inventory (NFI) and 12 Canadian jurisdictions: Alberta (AB), British Columbia (BC), Manitoba (MB), New Brunswick (NB), Newfoundland and Labrador (NL), Nova Scotia (NS), Northwest Territories (NT), Ontario (ON), Prince Edward Island (PE), Quebec (QC), Saskatchewan (SK), and Yukon Territory (YT), contributed in their original format. These datasets underwent data cleaning and quality assessment using the set of rules and standards set by the contributors and associated documentations, and were standardized, harmonized, and integrated into a single, centralized, and analysis-ready database. The primary objective of the MAGPlot project is to collate and harmonize forest ground plot data and to present the data in a findable, accessible, interoperable, and reusable (FAIR) format for pan-Canadian forest research. The current version includes both historical and contemporary forest ground plot data provided by data contributors. The standardized and harmonized dataset includes eight data tables (five site related and three tree measurement tables) in a relational database schema. Site-related tables contain information on geographical locations, treatments (e.g. stand tending, regeneration, and cutting), and disturbances caused by abiotic factors (e.g., weather, wildfires) or biotic factors (e.g., disease, insects, animals). Tree-related tables, on the other hand, focus on measured tree attributes, including biophysical and growth parameters (e.g., DBH, height, crown class), species, status, stem conditions (e.g., broken or dead tops), and health conditions. While most contributors provided large and small tree plot measurements, only NFI, AB, MB, and SK contributed datasets reported at regeneration plot level (e.g., stem count, regeneration species). Future versions are expected to include updated and/or new measurement records as well as additional tables and measured and compiled (e.g., tree volume and biomass) attributes. MAGPlot is hosted through Canada’s National Forest Information System (https://nfi.nfis.org/en/maps). ------------------------------------------------------LATEST SITE DISTURBANCES LAYER:------------------------------------------------------Shows the most recently recorded disturbance class at each MAGPlot site. These disturbance classes are broad categories, with more detailed disturbance types available in the full dataset.-----------NOTES:----------- The MAGPlot release (v1.0 and v1.1) does not include NL and SK datasets due to pending Data Sharing Agreements, ongoing data processing, or restrictions on third-party sharing. These datasets will be included in future releases. While certain jurisdictions permit open or public data sharing, given that requestor signs and adheres the Data Use agreement, there are some jurisdictions that require a jurisdiction-specific request form to be signed in addition to the Data Use Agreement form. For the MAGPlot Data Dictionary, other metadata, datasets available for open sharing (with approximate locations), data requests (for other datasets or exact coordinates), and available data visualization products, please check all the folders in the “Data and Resources” section below. Coordinates in web services have been randomized within 5km of true location to preserve site integrity.Access the WMS (Web Map Service) layers from the “Data and Resources” section below. A data request must be submitted to access historical datasets, datasets restricted by data-use agreements, or exact plot coordinates using the link below.NFI Data Request Form: https://nfi.nfis.org/en/datarequestform---------------------------------ACKNOWLEDGEMENT:--------------------------------- We acknowledge and recognize the following agencies that have contributed data to the MAGPlot database: Government of Alberta - Ministry of Agriculture, Forestry, and Rural Economic Development - Forest Stewardship and Trade Branch Government of British Columbia - Ministry of Forests - Forest Analysis and Inventory Branch Government of Manitoba - Ministry of Economic, Development, Investment, Trade, and Natural Resources - Forestry and Peatlands Branch Government of New Brunswick - Ministry of Natural Resources and Energy Development - Forestry Division, Forest Planning and Stewardship Branch Government of Newfoundland & Labrador - Department of Fisheries, Forestry and Agriculture - Forestry Branch Government of Nova Scotia - Ministry of Natural Resources and Renewables - Department of Natural Resources and Renewables Government of Northwest Territories - Department of Environment & Climate Change - Forest Management Division Government of Ontario - Ministry of Natural Resources and Forestry - Science and Research Branch, Forest Resources Inventory Unit Government of Prince Edward Island - Department of Environment, Energy, and Climate Action - Forests, Fish, and Wildlife Division Government of Quebec - Ministry of Natural Resources and Forests - Forestry Sector Government of Saskatchewan - Ministry of Environment - Forest Service Branch Government of Yukon - Ministry of Energy, Mines, and Resources - Forest Management Branch Government of Canada - Natural Resources Canada - Canadian Forest Service - National Forest Inventory Projects Office

Multi-Agency Ground Plot (MAGPlot) database (DB) is a pan-Canadian forest ground-plot data repository. The database synthesize forest ground plot data from various agencies, including the National Forest Inventory (NFI) and 12 Canadian jurisdictions: Alberta (AB), British Columbia (BC), Manitoba (MB), New Brunswick (NB), Newfoundland and Labrador (NL), Nova Scotia (NS), Northwest Territories (NT), Ontario (ON), Prince Edward Island (PE), Quebec (QC), Saskatchewan (SK), and Yukon Territory (YT), contributed in their original format. These datasets underwent data cleaning and quality assessment using the set of rules and standards set by the contributors and associated documentations, and were standardized, harmonized, and integrated into a single, centralized, and analysis-ready database. The primary objective of the MAGPlot project is to collate and harmonize forest ground plot data and to present the data in a findable, accessible, interoperable, and reusable (FAIR) format for pan-Canadian forest research. The current version includes both historical and contemporary forest ground plot data provided by data contributors. The standardized and harmonized dataset includes eight data tables (five site related and three tree measurement tables) in a relational database schema. Site-related tables contain information on geographical locations, treatments (e.g. stand tending, regeneration, and cutting), and disturbances caused by abiotic factors (e.g., weather, wildfires) or biotic factors (e.g., disease, insects, animals). Tree-related tables, on the other hand, focus on measured tree attributes, including biophysical and growth parameters (e.g., DBH, height, crown class), species, status, stem conditions (e.g., broken or dead tops), and health conditions. While most contributors provided large and small tree plot measurements, only NFI, AB, MB, and SK contributed datasets reported at regeneration plot level (e.g., stem count, regeneration species). Future versions are expected to include updated and/or new measurement records as well as additional tables and measured and compiled (e.g., tree volume and biomass) attributes. MAGPlot is hosted through Canada’s National Forest Information System (https://nfi.nfis.org/en/maps). ----------------------------------------------------------------SITES NUMBER OF MEASUREMENTS LAYER:-----------------------------------------------------------------Shows the total number of subsequent measurements conducted at each MAGPlot site.-----------NOTES: -----------The MAGPlot release (v1.0.0 and v1.1.0) does not include NL and SK datasets due to pending Data Sharing Agreements, ongoing data processing, or restrictions on third-party sharing. These datasets will be included in future releases. While certain jurisdictions permit open or public data sharing, given that requestor signs and adheres the Data Use agreement, there are some jurisdictions that require a jurisdiction-specific request form to be signed in addition to the Data Use Agreement form. For the MAGPlot Data Dictionary, other metadata, datasets available for open sharing (with approximate locations), data requests (for other datasets or exact coordinates), and available data visualization products, please check all the folders in the “Data and Resources” section below. Coordinates in web services have been randomized within 5km of true location to preserve site integrity.Access the WMS (Web Map Service) layers from the “Data and Resources” section below. A data request must be submitted to access historical datasets, datasets restricted by data-use agreements, or exact plot coordinates using the link below.NFI Data Request Form: https://nfi.nfis.org/en/datarequestform-----------------------------------ACKNOWLEDGEMENTS:-----------------------------------We acknowledge and recognize the following agencies that have contributed data to the MAGPlot database: Government of Alberta - Ministry of Agriculture, Forestry, and Rural Economic Development - Forest Stewardship and Trade Branch Government of British Columbia - Ministry of Forests - Forest Analysis and Inventory Branch Government of Manitoba - Ministry of Economic, Development, Investment, Trade, and Natural Resources - Forestry and Peatlands Branch Government of New Brunswick - Ministry of Natural Resources and Energy Development - Forestry Division, Forest - Planning and Stewardship Branch Government of Newfoundland & Labrador - Department of Fisheries, Forestry and Agriculture - Forestry Branch Government of Nova Scotia - Ministry of Natural Resources and Renewables - Department of Natural Resources and Renewables Government of Northwest Territories - Department of Environment & Climate Change - Forest Management Division Government of Ontario - Ministry of Natural Resources and Forestry - Science and Research Branch, Forest Resources Inventory Unit Government of Prince Edward Island - Department of Environment, Energy, and Climate Action - Forests, Fish, and Wildlife Division Government of Quebec - Ministry of Natural Resources and Forests - Forestry Sector Government of Saskatchewan - Ministry of Environment - Forest Service Branch Government of Yukon - Ministry of Energy, Mines, and Resources - Forest Management Branch Government of Canada - Natural Resources Canada - Canadian Forest Service - National Forest Inventory Projects Office