A Guardrail is a barrier fastened to the end of a bridge abutment, along the shoulder of a road or between travel lanes of opposing traffic. It is a Linear feature

Punctual location of structures under the management of MTMD (various types of: bridge, culvert (over 4.5 meters), gantry, wall and tunnel).**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

Localization of warnings such as road and bridge closures or incidents preventing free passage on a road segment or structure.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

TOLLPOINT _OFFICIAL is one of the important layers for Saskatchewan Upgraded Road Network (SURN) and National Road Network (NRN). The TOLLPOINT _OFFICIAL provides the information of road Toll Points to clients that require accurate, relatively up-to-date and detailed description of Saskatchewan Road Network.TOLLPOINT _OFFICIAL, This layer contains data about a place where a right-of-way is charged to gain access to a motorway, a bridge, etc. TOLLPOINT _OFFICIAL contains all the Toll Point locations in the Saskatchewan. TOLLPOINT _OFFICIAL is an important part of the Saskatchewan road network dataset. Each point geometry " TOLLPOINT" has unique Identifiers (NID). "NID" National Identifier is used to manage the updates between data producer and data users.

“Summer” missions occur in June, July and August and these focus on the Scotian Shelf and Bay of Fundy (i.e. 4VWX 5Yb, expanding recently to include the Laurentian Channel and Georges Bank (5Zc). Collected data includes total catch in numbers and weights by species. Length frequency data is available for most species, as are the age, sex, maturity and weight information for a subset of the individual animals. Other data such as ageing material, genetic material, and stomach contents are often also collected, but are stored elsewhere.“Summer” cruises occur in May, June, July and August and these focus on the Scotian Shelf and Bay of Fundy (i.e. 4VWX).Cite this data as: Clark, D., Emberley, J. Data of MARITIMES SUMMER RESEARCH VESSEL SURVEYS. Published January 2021. Population Ecology Division, Fisheries and Oceans Canada, Dartmouth, N.S. https://open.canada.ca/data/en/dataset/1366e1f1-e2c8-4905-89ae-e10f1be0a164

Fishing event (e.g., day, time, location, catch effort), and associated biological data from the Standardized Inlet Survey component of the annual Sablefish Research and Assessment Survey on the British Columbia coast.IntroductionDFO and the Canadian Sablefish Association undertake a collaborative fishery-independent annual research survey under a joint agreement. The survey employs longline trap gear to obtain catch rate data, gather biological samples, capture oceanographic measurements, and collect tag release and recapture data.Data summaries are provided here for standardized sets conducted at fixed stations within mainland inlets. The design of the sablefish survey has developed over time by incorporating and discontinuing components, including individual experimental studies (not available on OpenData). This Standardized Inlet Survey component differs in methodology from the other two survey components: (1) Offshore stratified random survey (2003 – present; available on OpenData using link below), and(2) Standardized trap survey – offshore indexing and offshore tagging (1990 – 2010; not yet available on OpenData). For the Standardized Inlet Survey, sets are allocated to five specific polygons in each of the following four inlet areas: Portland Inlet, Gil Island, Finlayson Channel, and Dean/Burke Channel. All four inlets were surveyed consistently between 2003 and 2019. No inlets were surveyed in 2020, and a single inlet was surveyed each year since 2021. Survey procedures are standardized and documented in Canadian Technical Reports of Fisheries and Aquatic sciences.Data tables provided for the Standardized Inlet Survey include (i) Effort, (ii) Catch, and (iii) Biological Information.Inlet EffortThis table contains information about annual survey trips and fishing events (sets). Trip-level information includes the year the survey took place, a unique trip identifier, the vessel that conducted the survey and the trip start and end dates (the dates the vessel was away from the dock conducting the survey). Set-level information includes the inlet name, date, time, location and depth that fishing took place, soak time, and number of traps deployed. All successful fishing events are included, where successful sets are those that met survey design specifications.Inlet CatchThis table contains the catch information from successful fishing events. Catch is identified to species or to the lowest taxonomic level possible. Catch is recorded as fish counts and / or weight. The unique trip identifier and set number are included so that catches can be related to the fishing event information (including capture location) for each set.Inlet Biological InformationThis table contains the biological data for sampled catches. Data may include any or all of length, weight, sex, maturity and age. Most of the sampled catch is Sablefish; however, some biological information has been collected for other species. Age structures are collected and are archived until required for analyses; therefore, all existing structures have not been aged. Tissue samples (usually a fin clip) may be collected for genetic (DNA) analysis for specific species. Tissue samples may be archived until required for analysis; for more information please see the data contacts. The unique trip identifier and set number are included so that samples can be related to the fishing event and catch information.

The location of coastal British Columbia marine kayaking point features, such as destinations and overnight campsites. The Coastal BC datasets are circa 2004 and legacy in nature. Caution should be exercised when using this data, as it may not be accurate or complete. There are currently no plans to update.

GIS compilation of data used to perform the stacked cumulative chance of success (resource potential map) in Open file 9163. Natural Resources Canada (NRCan) has been tasked, under the Marine Conservation Targets (MCT) initiative announced in Budget 2016, with evaluating the petroleum resource potential for areas identified for possible protection as part of the Government of Canada's commitment to conserve 10% of its marine areas by 2020. As part of this initiative, NRCan's Geological Survey of Canada (GSC) conducted a broad regional study of the petroleum potential over the majority of the Magdalen Basin, which is the principal geological basin in the southern Gulf of St. Lawrence. The GSC resource assessment is visually represented by a qualitative petroleum potential map. Disclaimer: A simplified colored version of the map is displayed on the Web Mapping Service (WMS). The correct version is available for download through the Federal Geospatial Platform (FGP) and GEOSCAN.

The hydrographic 1991 to 2020 climatology for the Maritimes region Atlantic Zone Monitoring Program core transects, Cabot Strait, Louisbourg, Halifax, Browns Bank, and Northeast Channel, are calculated to support annual reporting on seasonal variability. Details on data coverage for these transects and ancillary transects occupied since the inception of the program are provided. Comparisons with the previous climatology period, years 1981 to 2010, are summarized when possible.Cite this data as: Layton, C. Data of:Maritimes Region Atlantic Zone Monitoring Program 1991 to 2020 Hydrographic Transect Climatology.Published: August 2025. Ocean Ecosystems Science Division, Fisheries and Oceans Canada, Dartmouth, N.S.https://open.canada.ca/data/en/dataset/5f9c5d65-3ce1-4bdd-8b43-34086620d1e3

From August 2nd to September 9th, 2013, Fisheries and Oceans Canada conducted a baseline survey of marine fishes and their habitats on the Canadian Beaufort Shelf and slope. Sampling was conducted from the F/V Frosti at 64 stations along ten transects. Standardized sampling was conducted on the transects at pre-determined depth stations (20-40, 75, 200, 350, 500, 750, and 1000 m) using a variety of sampling equipment including benthic fishing trawls, plankton nets, sediment cores, and CTD and water sample profiles. A specialized CTD probe (UCTD) was deployed at an additional 72 locations while the ship was underway.Presented here is the information on the sampling locations, and the sampling gear deployed at each station.