Designated gas storage areas are land areas designated by the Ontario Energy Board that contain geological formations used for subsurface storage of natural gas. This product requires the use of geographic information system (GIS) software.

The locations of wells that have been drilled for oil production, gas or salt resources or for underground storage of hydrocarbons. This data can be used for land use and resource management, emergency management, as well as compliance and enforcement in the petroleum industry. The Data is collected on an on-going basis and maintained in the Ontario Petroleum Data System (OPDS).

Sub-surface facilities used for storing natural gas. The facilities are usually hollowed-out salt domes, geological reservoirs (depleted oil or gas field) or water bearing sands (called aquifers) topped by an impermeable cap rock.Mapping Resources implemented as part of the North American Cooperation on Energy Information (NACEI) between the Department of Energy of the United States of America, the Department of Natural Resources of Canada, and the Ministry of Energy of the United Mexican States.The participating Agencies and Institutions shall not be held liable for improper or incorrect use of the data described and/or contained herein. These data and related graphics, if available, are not legal documents and are not intended to be used as such. The information contained in these data is dynamic and may change over time and may differ from other official information. The Agencies and Institutions participants give no warranty, expressed or implied, as to the accuracy, reliability, or completeness of these data.

Stations containing prime movers, electric generators, and auxiliary equipment for converting mechanical, chemical into electric energy with an installed capacity of 1 Megawatt or more generated from renewable energy, including biomass, hydroelectric, pumped-storage hydroelectric, geothermal, solar, and wind.Mapping Resources implemented as part of the North American Cooperation on Energy Information (NACEI) between the Department of Energy of the United States of America, the Department of Natural Resources of Canada, and the Ministry of Energy of the United Mexican States.The participating Agencies and Institutions shall not be held liable for improper or incorrect use of the data described and/or contained herein. These data and related graphics, if available, are not legal documents and are not intended to be used as such. The information contained in these data is dynamic and may change over time and may differ from other official information. The Agencies and Institutions participants give no warranty, expressed or implied, as to the accuracy, reliability, or completeness of these data.Parent Collection:[North American Cooperation on Energy Information, Mapping Data](https://open.canada.ca/data/en/dataset/aae6619f-f9f3-435d-bc32-42decd58b674)

The Ministry of Environment is responsible for Hazardous Substance and Waste Dangerous Goods Storage in Saskatchewan.Storing hazardous materials and waste dangerous goods in accordance with the Hazardous Substances and Waste Dangerous Goods Regulations (HSWDG), helps to avoid environmental impacts or risk to human health. To minimize these risks, the regulations ensure storage facilities are constructed, operated and decommissioned properly. The Ministry of Environment must approve the construction, alteration or expansion of a facility to handle hazardous substances or waste dangerous goods. All hazardous substance storage facilities require construction and operating approvals. Owners also require an approval from the Ministry of Environment to dismantle or decommission equipment used to store and handle hazardous substances and waste dangerous goods when they are no longer in use. For further information, please contact the Ministry of Environment Inquiry Centre (Toll Free) at 1-800-567-4224,  centre.inquiry@gov.sk.ca or visit the hazardous materials storage page on saskatchewan.ca.

ENV - Environment and conservation (environment)Environmental resources, protection, and conservation. For example, resources describing pollution, waste storage and treatment, environmental impact assessment, environmental risk, and nature reserves. )

Hydraulic properties characterize a hydrogeological unit. The hydraulic properties considered for this dataset are the transmissivity, the hydraulic conductivity, the storage coefficient, the specific storage coefficient and the porosity. Hydraulic properties are estimated by performing aquifer tests (pumping tests, slug tests). The hydraulic tests and their duration are managed in this dataset. The methods used to create the dataset are described in the metadata associated with the dataset. The dataset exhibits a general description of hydraulic properties of the hydrogeological unit, including hydraulic test, total test duration, method and date. It includes numbers and/or ranges describing the aquifer tests results. Note that an alternate raster representation could be used in complement to the discrete point-based representation.

Province-wide SDE spatial layer displaying the approximate extent and providing the elevation of designated permitted power-storage reservoir areas over crown lands, along with water licence attributes. This layer is an instantiation of the spatial view WLS_RESERVOIR_PMT_LICENSEE_SVW

Data represents surface water occurrence frequency (percentage), which describes the frequency for each grid appeared as water in the 30 years time period of 1991 to 2020. The data covers Canada’s entire landmass including all transboundary watersheds, and is at 30-meter spatial resolution. The surface water occurrence frequency is derived using the surface water model of Wang et al. (2023) from all-available monthly water data observed by the Landsat satellites (Pekel et al., 2016). Here, permanent waters are represented by 100%, and permanent land surfaces by 0%, of water occurrence for a 30-meter by 30-meter grid.References:Pekel, J.-F., A. Cottam, N. Gorelick, A.S. Belward, 2016, High-resolution mapping of global surface water and its long-term changes. Nature, 540, 418-422.Wang, S., J. Li, and H. A. J. Russell, 2023, Methods for Estimating Surface Water Storage Changes and Their Evaluations. Journal of Hydrometeorology, DOI: https://doi.org/10.1175/JHM-D-22-0098.1.

The Standardized Precipitation Index (SPI) has been recognized as the most accessible index for quantifying and reporting meteorological drought. On short timescales, the SPI is closely related to soil moisture, while at longer timescales, the SPI can be related to groundwater and reservoir storage. The model uses observed historical precipitation amounts to compute probability distributions which are then normalized using an incomplete gamma function over a range of timescales. The values can be interpreted as the number of standard deviations by which the observed anomaly deviates from the long-term mean. where positive values (greater than zero) result from above average conditions.