Determines the location of Coal Titles within the Province of British Columbia. It is established under the authority of the Petroleum and Natural Gas Grid Regulation. It is defined by a set of UTM coordinates which approximate NAD 27 latitude and longitude positions. Units are the finest level of the Coal Grid. They are defined by UTM coordinates for their corners and the mid points of the four sides. A unit is the base building block for creating the Coal Grid. In a block there are 100 units, 10 rows by 10 columns, and numbered consecutively, starting in the southeast corner. The units are numbered 1 to 10, 11 - 20 etc. always reading from right to left. E.G. 082E05D007

Determines the location of Coal Titles within the Province of British Columbia. It is established under the authority of the Petroleum and Natural Gas Grid Regulation. It is defined by a set of UTM coordinates which approximate NAD 27 latitude and longitude positions. Blocks are the second finest level of the coal grid. A block consists of 100 units divided into 10 rows by 10 columns. There are also 12 blocks in a group, comprising 3 rows by 4 columns and labelled A to L. E.G. 084E05L

This is a spatial layer that reflects operational activities for cutblocks contained within harvesting authorities. The Forest Tenures Section (FTS) is responsible for the creation and maintenance of digital Forest Atlas files for the province of British Columbia encompassing Forest and Range Act Tenures. It also supports the forest resources programs delivered by MoFR. Each feature contains a Ministry of Forests and Range (MoFR) FEATURE_CLASS_SKEY (number) column that further defines the type of that feature. The layer contains cutblock boundaries for the following feature classes: Forest Licence Cut Block (555), Licence to Cut Cut Block (616), Timber Licence Cut Block (810), Timber Sale Licence Major Cut Block (817), Timber Sale Licence Minor CB Non Replaceable (820), Tree Farm Licence Cut Block (833), Wood Lot Licence Cut Block (863), Community Forest Cut Block (2402), and Timber Sale Licence Minor CB Replaceable (2417). Each cut block has a life cycle status that is either PENDING - the cut block has been submitted as a new cut block or an amendment, but is not yet approved or rejected, ACTIVE - the cut block is approved and activities may be taking place on the cut block, or RETIRED - all activities, with respect to the harvesting authority, have been completed for the cut block

Bait resources in most of the province are assigned to harvesters through the use of a block system -- 1 harvester per 'bait harvest' area. There are exceptions to the block system (e.g., Lake Erie), where bait is allocated to multiple users fishing the same area.

The spatial representation for a Forest Exclusion, which is an areas or block excluded from Provincial Forest at the time of the original establishment by Order in Council

Notice: This layer is out of date and scheduled to be retired October 31, 2026.Yukon First Nations and Tetlit Gwich'in settlement lands including both rural blocks (R-block) and Fee Simple lands of the First Nations that have ratified their agreements. This data was built using the 1:1,000,000 Digital Chart of the World (DCW) as the base and the 1:30,000 signed Territorial Research Base Maps (TRBM) to define the boundaries.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps). Discover more digital map data and interactive maps from Yukon's digital map data collection. For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca) 

This information is used  to manage oil and gas rights on offshore Crown lands in Ontario. A grid system of blocks and tracts is used to divide the area. 1 block =  5 minute longitude by 5 minute latitude numbered area. 1 tract =  1 minute longitude by 1 minute latitude area, assigned by letters . 1 block contains 25 tracts. This product requires the use of geographic information system (GIS) software.

Notice: This layer is out of date and scheduled to be retired October 31, 2026.Yukon First Nations and Tetlit Gwich'in settlement lands including both rural blocks (R-block) and Fee Simple lands of the First Nations that have ratified their agreements. Settlement land is land identified in a first nation's final agreement as settlement land of the first nation. There are three types of settlement land that a Yukon First Nation can own and manage: Category A: complete ownership of surface and subsurface; Category B: complete ownership of the surface only; Fee Simple: private ownership. This data was built using the 1:250,000 National Topographic Data Base (NTDB) as the base and the 1:30,000 signed Territorial Research Base Maps (TRBM) to define the boundaries.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps). Discover more digital map data and interactive maps from Yukon's digital map data collection. For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

Notice: This layer is being retired on October 31, 2026 and has been replaced by First Nation Settlement Lands - Overview. Surveyed Cadastral Framework for Yukon First Nations and Tetlit Gwich'in settlement lands including rural blocks (R-block) and Site specific (S-sites) lands of the First Nations that have ratified their agreements. Settlement land is land identified in a first nation's final agreement as settlement land of the first nation. There are three types of settlement land that a Yukon First Nation can own and manage: Category A: complete ownership of surface and subsurface; Category B: complete ownership of the surface only; Fee Simple: private ownership. In the source NRCAN ICM dataset all First Nation Lands were included in the Land_parcel feature class. They have being extracted from land_parcel to produce this separate feature class.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps). Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca) 

Often these parcels were surveyed before township surveys in their area. They may also be supplemental to them (as is the case with some Cadastral Islands). Sometimes these were laid out after a township survey was done, so some may be part of a geographic township. Cadastral Location includes the following: GTP Block - Timber block used by the Grand Trunk Pacific Railway for feeding steam engines, building bridges, and for supplying railway ties. Mining Location - A parcel of land whose surveyed boundaries were laid out during the late nineteenth century for the Crown sale of land for mining purposes to groups or individuals. Cadastral Island - Island delineated on survey plans. It may or may not be part of a geographic township. Other Location - A parcel of land whose surveyed boundaries were laid out during the late nineteenth century for the Crown sale of land for various agricultural or farming purposes to groups or individuals. These locations are mainly found in Northern Ontario and also exist in the un-surveyed territories.