This GIS dataset depicts locations of radioactive sites on the Alberta Shield reported by J.D. Godfrey in 1986. These data were created in ArcInfo coverage format and distributed in a shapefile format.

This dataset shows the location of radioactive boulders for the Province of Saskatchewan.This dataset shows the location of radioactive boulders compiled from the Ministry of Energy and Resources’ assessment files for the Province of Saskatchewan. This is a work in progress and some data is currently missing. Some assessment files did not include radioactive measurements, only that the boulders are above background radiation. The data was created as a file geodatabase feature class and output for public distribution. **Please Note – All published Saskatchewan Geological Survey datasets, including those available through the Saskatchewan Mining and Petroleum GeoAtlas, are sourced from the Enterprise GIS Data Warehouse.  They are therefore identical and share the same refresh schedule. 

Background:More than 80% of the heat produced in the Earth's crust comes from granitoid rocks. When granitoid rocks form they naturally concentrate radioactive elements such as U, Th, and K, and the radiogenic decay of these elements is an exothermic reaction. The radioactive decay of these elements within a granitoid body may generate local heat anomalies and elevated geothermal gradient at relatively shallow crustal levels. In combination with other local rock properties (e.g, porosity, permeability, thermal conductivity), radiogenic heat has the potential to generate a geothermal resource. The decay of radioactive elements converts mass into radiation energy, which in turn gets converted to heat. While all naturally radioactive isotopes generate some heat, significant heat generation only occurs from the decay of 238 U ,235 U ,232 Th and 40 K. Therefore, potential heat production is governed by the concentrations of U ,Th and K in the rock. In igneous rocks, radiogenic heat production is dependent on the bulk chemistry of the rock and decreases from acidic (e.g. granite) through basic to ultra basic rock types. Therefore, granites with anomalously high concentrations of U ,Th and K are targets for calculating potential radiogenic heat production. Potential radiogenic heat production (A)from plutonic rocks can be calculated using this equation:A (\\u03BCW/m 3 )=10 -5 \\u1D29 (9.52c u +2.56c K +3.48c Th )where "c" is the concentration of radioactive elements "U" and "Th" in ppm, and "K" in %; and "\\u1D29" is the rock density. Heat production constants of the natural radio-elements U, Th, K are 9.525x10 -5 , 2.561x10 -5 and 3.477x10 -9 W/kg, respectively.Data and Methods:Geochemical data from \~1760 samples of plutonic rocks from Yukon are used to calculate potential heat production. The calculated values for radiogenic heat production (A) are plotted over the mapped distribution of Paleozoic and younger plutonic rocks and major crustal faults are also shown for reference.

This dataset provides the results obtained by Health Canada’s Radiological Monitoring Network (CRMN) for airborne radioactivity content at monitoring stations across Canada. More information about the CRMN network can be found on the Health Canada website (see link below). The results provided are activity concentration, uncertainty and the minimum detectable concentration for the naturally occurring radionuclides, beryllium-7 (7Be) and lead-210 (210Pb), and the anthropogenic (originating from human activity) radionuclides, cesium-134 (134Cs), cesium-137 (137Cs), and iodine-131 (131I). The data comes from the analysis of particulates accumulated in filter media, drawn by high-volume air samplers fixed in the field. Such data is typically dominated by natural radionuclides, such as 7Be and 210Pb. 7Be is a natural cosmogenic radionuclide that is produced in the upper atmosphere when cosmic rays bombard oxygen and nitrogen. 210Pb is also a natural radioisotope that results from the decay of uranium (238U) to radium (226Ra). 238U comes from the soil and eventually decays to 210Pb. Radon-222, which is a natural radioactive gas, is also a part of this decay chain. Radon moves through the soil and becomes diluted in the atmosphere. If a home is built on soil or rocks that contain uranium, radon can seep into homes and may accumulate to high levels. More information about the Health Canada radon program can be found on the Health Canada website. For all our stations, the airborne radioactivity data shows a small increase in the activity concentration of 134Cs, 137Cs and 131I measured between March and May of 2011, attributable to the nuclear accident at the Fukushima-Daiichi Nuclear Power Station. It is important to note that, even at their respective peaks, the measured activity concentrations of 134Cs, 137Cs and 131I represent only a small fraction of typical background exposure from natural sources of radiation. Occasionally, other small increases in activity concentration of anthropogenic radionuclides are observed. Spikes in 137Cs activity are often associated with forest fires, which can lead to the re-suspension of 137Cs already present in the environment, most likely from atmospheric nuclear weapons testing in the 1960’s. Detection of small amounts of 131I is commonly associated with its medical use by hospitals.The map shows the approximate sampling location for each monitoring station. Stations are found within the associated location range.

Terrestrial gamma dose rates, reported as ambient dose equivalent in the unit nSv/hr, are presented for the past ninety days to present. Data is measured in real-time, typically from the spectroscopic dosimeters of the Fixed Point Surveillance (FPS) Network. Dosimeter stations of this network are located in population centres and other strategic locations across Canada. Real-time data provides insight into typical levels and fluctuations of radioactivity in the Canadian environment and may provide early detection of sources of radioactivity other than environmental background.As a reference, the Nuclear facilities and uranium mines and mills can be found in the Open Maps catalogue and added to the Real-time Environmental Radioactivity Monitoring map using the "+" (Add layer) button of the viewer’s “Layers” panel. The ESRI REST or WMS links found in the Nuclear facilities and uranium mines and mills metadata record is what’s needed to proceed. These links can be found here: https://open.canada.ca/data/en/dataset/6478153c-829f-4649-bd52-41f63b41021f.The Nuclear facilities and uranium mines and mills dataset provided by the Canadian Nuclear Safety Commission corresponds to nuclear licensees that operate across Canada. This includes uranium mines and mills, uranium processing facilities, nuclear power plants, research reactors, particle accelerators, and nuclear substances processing facilities. All of these facilities are licensed by the CNSC and are subject to strict regulatory oversight to ensure the safety of the public and the environment.

This dataset contains the total annual releases of radionuclides released directly to the environment through stack emissions from uranium and nuclear substance processing facilities in Canada.This original radionuclide releases dataset of the uranium and nuclear substance processing facilities provides results for both stack emissions and direct discharge (i.e. releases to water). The dataset has been divided in two subsets for better discoverability. In this record as its title indicates, you will find the stack emissions results mapped. Make sure to look at the uranium and nuclear substance processing facilities direct discharge record in order to obtain a complete picture.

The Airborne Radionuclide Concentrations (ARC) Dataset is a general dataset of airborne radionuclide concentrations analyzed at the Radiation Protection Bureau (RPB). The RPB is responsible for delivering Health Canada’s program in the area of ionizing radiation protection. This dataset includes radionuclide concentrations at locations in RPB’s Canadian air monitoring networks including its Comprehensive Nuclear Test-Ban Treaty (CTBT) stations and the Canadian Radiological Monitoring Network (CRMN). The dataset may also include additional airborne radionuclide concentration data from other networks, fieldwork and any additional data collected during emergencies.The dataset shows concentrations of airborne radionuclides that were targeted for analysis and detected, for example, Beryllium-7 (7Be), Lead-210 (210Pb), Cesium-134 (134Cs), Cesium-137 (137Cs), Iodine-131 (131I), Xenon-133 (133Xe), and Xenon-135 (135Xe), among others. The data is presented in xml file format, selected to conform to the International Atomic Energy Agency’s (IAEA) International Radiological Information Exchange (IRIX) Format. The IRIX format is used to facilitate the exchange of web-based emergency data and information to help organizations respond to radiological incidents and emergencies.The map shows the approximate sampling location for each monitoring station. Stations are found within the associated location range.

This dataset contains the total annual releases of radionuclides released directly to the environment through direct discharge from uranium and nuclear substance processing facilities in Canada.This original radionuclide releases dataset of the uranium and nuclear substance processing facilities provides results for both stack emissions and direct discharge (i.e. releases to water). The dataset has been divided in two subsets for better discoverability. In this record as its title indicates, you will find the direct discharge results mapped. Make sure to look at the uranium and nuclear substance processing facilities stack emissions record in order to obtain a complete picture.

This dataset contains the total annual releases of radionuclides released directly to the environment through direct discharge (i.e. releases to water) from uranium mines and mills in Canada.Note that there is no stack emissions for the uranium mines and mills.

This dataset contains the total annual releases of radionuclides released directly to the environment through direct discharge (i.e. releases to water) from facilities operated by Canadian Nuclear Laboratories in Canada.This original radionuclide releases dataset of the Canadian Nuclear Laboratories provides results for both stack emissions and direct discharge. The dataset has been divided in two subsets for better discoverability. In this record as its title indicates, you will find the direct discharge results mapped. Make sure to look at the Canadian Nuclear Laboratories stack emissions record in order to obtain a complete picture.Regulatory Oversight Report for Canadian Nuclear Laboratories Sites - 2018: https://nuclearsafety.gc.ca/eng/resources/publications/reports/regulatory-oversight-reports/cnl-report-2018.cfm