Ramsar Weltand features are part of the Protected Areas coverage's for Saskatchewan.Ramsar Wetland are Wetlands of international importance for flood control, nutrient production, wildlife habitat and other related purposes. Management procedures to prevent the destruction and deterioration of wetlands through state adherence to an international convention known as RAMSAR, signed in Iran in 1971. One in a series of Protected Areas coverage'screated in 1996 by Canadian Plains Research Centre, University of Regina.

Wetlands and areas of influence covered by the Interim Control Regulation (ICR) Nature plan amended by Regulation 1274-2.attributes:cmh_ID - Identifier of the wetland complexType - Wetland or area of influencingInfoCI - Additional information on the Interim Control RegulationsSource: The original delimitation of wetlands comes from Ducks Unlimited Canada and the Department of the Environment and the Fight against Climate Change (MELCC), 2020. Detailed mapping of wetlands in populated areas in southern Quebec. Changes have been made to the source data in order to produce this “RCI Wetlands” data layer.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

Five riparian classes of wetlands (W1 to W5) based on whether the wetland is a simple wetland or wetland complex, wetland size, and biogeoclimatic unit in which the wetland occurs. Wetland classification is based on the 1995 Forest Practices Code Riparian Management Area Guidebook: http://www.llbc.leg.bc.ca/public/PubDocs/bcdocs/237312/Rip-toc.htm

The Canadian National Wetlands Inventory (CNWI) is a comprehensive, publicly available national geodatabase developed by the Canadian Wildlife Service (CWS) of Environment and Climate Change Canada (ECCC), in collaboration with federal, provincial, and territorial governments, academia, Indigenous groups, and Non-Governmental Organizations (NGOs). It consists of the best available wetland mapping data, along with its metadata, published in a standardized manner.The CNWI is continuously updated through the compilation of existing data and the acquisition of new high-resolution datasets to address coverage gaps, with an emphasis on peatlands and coastal wetlands, which are key habitats for greenhouse gas (GHG) sequestration. ECCC plans to use the CNWI to train and validate machine-learning algorithms to delineate and classify wetlands at a national scale and to measure trends over time. This will directly support Canada’s Nature-Based Climate Solutions by informing biodiversity conservation, guiding climate change mitigation and adaptation strategies, and supporting GHG emissions reporting.The CNWI was initially released in February 2024 with 13 source datasets. In June 2025, the Inventory was updated to include 14 additional datasets. Collectively, these 27 source datasets comprise approximately 12.1 million wetland polygon features, covering a total area of roughly 640,000 square kilometers across ten provinces and territories (BC, MB, NB, NL, NS, PE, ON, QC, SK, YT). These source datasets were cross-walked into a standardized CNWI classification schema, which is based on two foundational documents: the Canadian Wetland Classification System (National Wetlands Working Group, 1997) and the Canadian Wetland Inventory Data Model (2016).The CNWI Schema contains five major wetland classes (Bog, Fen, Swamp, Marsh, and Shallow/Open Water) and eight subclasses (Rich Fen, Poor Fen, Organic Swamp, Mineral Swamp, Organic Marsh, Mineral Marsh, Shallow Water, and Open Water). Non-conforming wetlands can be categorized into three groups: Peatland, Mixed, and Unclassified. For more information on the CNWI and the related database, please refer to the CNWI User Manual and other supporting documents that accompany this publication. The User Manual provides detailed information on how data are collected, managed, and distributed to meet CNWI data standards.

Wetlands are lands that are seasonally or permanently flooded by shallow water. They also include lands where the water table is close to the surface. The wetland polygons are managed independently from other hydro data classes and may overlap water bodies or other hydro data. Not all wetlands have been identified and mapped. Active maintenance is ongoing province wide. The currency and accuracy of the spatial representation is variable and requires on-the-ground verification.

All wetland polygons for the province

The third generation of high resolution 10-m wetland inventory map of Canada, covering an approximate area of one billion hectares, was generated using multi-year (2016-2020), multi-source imagery (Sentinel-1, Sentinel-2, ALOS PALSAR-2, and SRTM) Earth Observation (EO) data as well as environmental features. Over 8800 wetland polygons were processed within an object-based random forest classification scheme on the Google Earth Engine cloud computing platform. The average overall accuracy of 90.5% is an increase of 4.7% over CWIM2.CWIM Versions:The Canadian Wetland Inventory Map (CWIM) is an extension of work started at Memorial University to produce a Newfoundland and Labrador wetland inventory during 2015-2018 which was significantly funded by Environment and Climate Change Canada. The first national CWIM was produced 2018-2019 as a collaboration between Memorial University, C-CORE, and Natural Resources Canada. Dr. Brian Brisco was instrumental in connecting ground truth from multiple sources to the project and providing guidance. Version 2 was produced in 2020 which included more training data and processing by Canada’s ecozones rather than provinces to take advantage of the commonality of landscape ecological features within ecozones to improve the accuracy. Version 3 produced in 2021 continued adding more data sources to further improve accuracy specifically an overestimation of wetland area as well as introducing a confidence map. Version 3A completed in 2022 updates only the arctic ecozones due to their relatively lower accuracy and added hydro-physiographic data layers. Currently work is underway to create a northern circumpolar wetland inventory map to be published in 2025.Paper on Newfoundland and Labrador Wetland Inventory:Mahdianpari, M.; Salehi, B.; Mohammadimanesh, F.; Homayouni, S.; Gill, E. The First Wetland Inventory Map of Newfoundland at a Spatial Resolution of 10 m Using Sentinel-1 and Sentinel-2 Data on the Google Earth Engine Cloud Computing Platform. Remote Sens. 2019, 11, 43. https://doi.org/10.3390/rs11010043Paper on CWIM1:Mahdianpari, M., Salehi, B., Mohammadimanesh, F., Brisco, B., Homayouni, S., Gill, E., … Bourgeau-Chavez, L. (2020). Big Data for a Big Country: The First Generation of Canadian Wetland Inventory Map at a Spatial Resolution of 10-m Using Sentinel-1 and Sentinel-2 Data on the Google Earth Engine Cloud Computing Platform. Canadian Journal of Remote Sensing, 46(1), 15–33. https://doi.org/10.1080/07038992.2019.1711366Paper on CWIM2:Mahdianpari, M., Brisco, B., Granger, J. E., Mohammadimanesh, F., Salehi, B., Banks, S., … Weng, Q. (2020). The Second Generation Canadian Wetland Inventory Map at 10 Meters Resolution Using Google Earth Engine. Canadian Journal of Remote Sensing, 46(3), 360–375. https://doi.org/10.1080/07038992.2020.1802584Paper on CWIM3:M. Mahdianpari et al., "The Third Generation of Pan-Canadian Wetland Map at 10 m Resolution Using Multisource Earth Observation Data on Cloud Computing Platform," in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing, vol. 14, pp. 8789-8803, 2021, doi: 10.1109/JSTARS.2021.3105645.Paper on Arctic ecoregion enhancement for CWIM3A:Michael Merchant, et al., ”Leveraging google earth engine cloud computing for large-scale arctic wetland mapping,” in International Journal of Applied Earth Observation and Geoinformation, vol. 125, 2023, https://doi.org/10.1016/j.jag.2023.103589.

High-resolution binary wetland map for Canada (2001-2016). Wetland map for the forested ecosystems of Canada focused on current conditions. It is developed within the framework of Canada’s National Terrestrial Ecosystem Monitoring System (NTEMS). The binary wetland data included in this product is national in scope (entirety of forested ecosystem) and represents the wall to wall characterization for 2001-2016 (see Wulder et al. 2018). This product was generated using both annual gap free composite reflectance images and annual forest change maps following the Virtual Land Cover Engine (VLCE) process (see Hermosilla et al. 2018), over the 650 million ha forested ecosystems of Canada. Elements of the VLCE classification approach are inclusion of disturbance information in the processes as well as ensuring class transitions over time are logical. Further, a Hidden Markov Model is implemented to assess individual year class likelihoods to reduce variability and possible noise in year-on-year class assignments (for instances when class likelihoods are similar). For this product, to be considered as currently a wetland a pixel must have been classified as wetland at least 80% or 13 of the 16 years between 2001 and 2016, inclusively. For an overview on the data, image processing, and time series change detection methods applied, see Wulder et al. (2018). Wulder, M.A., Z. Li, E. Campbell, J.C. White, G. Hobart, T. Hermosilla, and N.C. Coops (2018). A National Assessment of Wetland Status and Trends for Canada’s Forested Ecosystems Using 33 Years of Earth Observation Satellite Data. Remote Sensing. For a detailed description of the VLCE process and the subsequently generated land cover product, including an accuracy assessment, please see Hermosilla et al. (2018).

To support the WAWA program at the Department of Environment and Local Government and alert primary users to the location of wetlands and possible regulatory requirements for land development. The wetlands map is intended for planning purposes only. The wetland boundaries are only approximate.

The wetland year count data included in this product is national in scope (entire forested ecosystem) and represents a wall to wall wetland characterization for 1984-2016 (Wulder et al. 2018). It is developed within the framework of Canada’s National Terrestrial Ecosystem Monitoring System (NTEMS). This product was generated using both annual gap free composite reflectance images and annual forest change maps following the Virtual Land Cover Engine (VLCE) process (see Hermosilla et al. 2018), over the 650 million ha forested ecosystems of Canada. Elements of the VLCE classification approach are inclusion of disturbance information in the processes as well as ensuring class transitions over time are logical. Further, a Hidden Markov Model is implemented to assess individual year class likelihoods to reduce variability and possible noise in year-on-year class assignments (for instances when class likelihoods are similar). The values can range from 0 to 33 denoting the number of years between 1984 and 2016 that a pixel was classified as wetland or wetland-treed in the VLCE data cube.For an overview on the data, image processing, and time series change detection methods applied, as well as information on independent accuracy assessment of the data, see Hermosilla et al. (2016; http://www.tandfonline.com/doi/full/10.1080/17538947.2016.1187673). A detailed description of the VLCE process and the subsequently generated land cover product, including an accuracy assessment, please see Hermosilla et al. (2018). The focused wetland analyses can be found described in Wulder et al (2018).Geographic extent: Canada's forested ecosystems (~ 650 Mha)Time period: 1985–2011