The Canadian Aquatic Biomonitoring Network (CABIN) is an aquatic biomonitoring program for assessing the health of fresh water ecosystems in Canada. Benthic macroinvertebrates are collected at a site location and their counts are used as an indicator of the health of that water body. CABIN is based on the network of networks approach that promotes inter-agency collaboration and data-sharing to achieve consistent and comparable reporting on fresh water quality and aquatic ecosystem conditions in Canada. The program is maintained by Environment and Climate Change Canada (ECCC) to support the collection, assessment, reporting and distribution of biological monitoring information. A set of nationally standardized CABIN protocols are used for field collection, laboratory work, and analysis of biological monitoring data. A training program is available to certify participants in the standard protocols. There are two types of sites in the CABIN database (reference and test). Reference sites represent habitats that are closest to “natural” before any human impact. The data from reference sites are used to create reference models that CABIN partners use to evaluate their test sites in an approach known as the Reference Condition Approach (RCA). Using the RCA models, CABIN partners match their test sites to groups of reference sites on similar habitats and compare the observed macroinvertebrate communities. The extent of the differences between the test site communities and the reference site communities allows CABIN partners to estimate the severity of the impacts at those locations. CABIN samples have been collected since 1987 and are organized in the database by study (partner project). The data is delineated by the 11 major drainage areas (MDA) found in Canada and each one has a corresponding study, habitat and benthic invertebrate data file. Links to auxiliary water quality data are provided when available. Visits may be conducted at the same location over time with repeat site visits being identified by identical study name / site code with different dates. All data collected by the federal government is available on Open Data and more partners are adding their data continually. The csv files are updated monthly. Contact the CABIN study authority to request permission to access non open data.

The Canadian Geographical Names Data Base (CGNDB) is the authoritative national database of Canada's geographical names. The purpose of the CGNDB is to store place names and their attributes that have been approved by the Geographical Names Board of Canada (GNBC), the national coordinating body responsible for standards and policies on place names. The CGNDB is maintained by Natural Resources Canada, through the Canada Centre for Mapping and Earth Observation. The geographic extent of the CGNDB is the Canadian landmass and water bodies; the temporal extent is from 1897 to present. This dataset is extracted from the CGNDB on a weekly basis, and consists of current officially approved names, feature type, coordinates of the feature, decision date, source, and other attributes. The output file formats for this product are: text (CSV), Shape (SHP), and Keyhole Markup Language (KML).Content advisory: The Canadian Geographical Names Database contains historical terminology that is considered racist, offensive and derogatory. Geographical naming authorities are in the process of addressing many offensive place names, but the work is still ongoing. For more information, please contact the GNBC Secretariat.

The Remote Communities Energy Database (RCED) is a tool that aims to collect and show pertinent information about the generation and use of electricity and other energy sources for all remote communities of Canada. This data is collected from a variety sources, including Statistics Canada, Provincial and Territorial Governments, utilities, public reports and communities.The term “remote community” refers to any community not currently connected to the North American electrical grid nor to the piped natural gas network; and which is a permanent or long-term (five years or more) settlement with at least 10 dwellings.Disclaimer: Natural Resources Canada (NRCan) accepts no responsibility or liability for any errors, inaccuracies and/or omissions in the Remote Communities Energy Database (RCED). The content of the RCED is a compilation of data obtained from many sources and the data is subject to change without notice. Neither does NRCan warrant or guarantee that the information is accurate, complete or current at all times. In no event will NRCan or the Government of Canada and its employees be liable or responsible for any damages resulting from any such errors, inaccuracies or omissions nor will they be liable or responsible for any lost profits, loss of revenue or earnings, claims by third parties or for any economic, indirect, special, incidental, consequential or exemplary damage including but not limited to any demands or causes of action in contract, tort or otherwise including any liability for negligence.

Medical institutions in BC that provide diagnostic and treatment services for people whose illnesses or injuries require that they occupy a bed for at least one night. Hospitals can be distinguished by the level of care they offer (general acute, subacute, extended acute care) and the medical conditions in which they may specialize (specialty hospitals). Definition is protected by Copyright by Information and Referral Federal of Los Angeles County, Inc. See link: (https://211taxonomy.org/subscriptions/#agreement)

This dataset provides the background radiation dose results from Health Canada’s Canadian Radiological Monitoring Network (CRMN) monitoring sites. More information about the CRMN network can be found on the Health Canada website (see link below).This background radiation data contains both “monitoring” and “transit” dosimeters starting in 2016. The historical background radiation dose data can be found on the Open Data portal. A transit dosimeter is sent along with the monitoring dosimeter to determine if there is a significant dose recorded by the dosimeter while it is in transit to the sampling station. The transit dosimeter is shipped out with a station monitor, and shipped back with the station monitor from the previous quarter. The monitoring dosimeters are deployed over a longer time (around three months) than the transit dosimeters (around 3 weeks). This difference largely explains the lower recorded dose values for the transit dosimeter. The results provided for the monitoring and transit dosimeters are expressed as ambient dose equivalent to a cesium source, in units of millisieverts (mSv). The measured dose rate is reported in mSv/day. The external dose can be attributed almost exclusively to natural radiation (of terrestrial and cosmic origin) with fluctuations based on several factors including location, soil characteristics, and seasonal changes. The map shows the approximate sampling location for each monitoring station. Stations are found within the associated location range.

Contact and location information for StrongStart BC Centres. For dynamic contact information for schools, see http://www.bced.gov.bc.ca/apps/imcl/imclWeb/Home.do or view a map of BC districts and schools at http://www.bced.gov.bc.ca/reporting/maps/welcome.php

The spatial representation for current Timber Supply Blocks (TSB). A Timber Supply Area is a designated area established by the Ministry in order to practice sound, integrated, resource management principles to improve the allowable annual cuts. TSAs were originally defined by an established pattern of wood flow from management units to the primary timber-using industries. They are the primary unit for allowable annual cut (AAC) determination. A TSA Supply Block is a designated area within the TSA where the Ministry approves the allowable annual cuts

644 datasets of Typical Meteorological Years (TMY) created by joining twelve Typical Meteorological Months selected from a database of up to 20 years of CWEEDS hourly data. The months are chosen by statistically comparing individual monthly means with long-term monthly means for daily total global solar irradiance, mean, minimum and maximum dry bulb temperature, mean, minimum and maximum dew point temperature, and mean and maximum wind speed. These hourly datasets are used by the engineering and scientific community mainly as inputs for solar system design and analysis and building energy systems analysis tools. This dataset has been updated with the most recent changes made in March 2023. The solar values in these files are based on 0.1° x 0.1° (11 km x 11 km grid) for all of Canada. Refer to Data Resources below for additional information on the TMY file format.

The locations of coastal British Columbia industrial sites. The Coastal BC datasets are circa 2004 and legacy in nature. Caution should be exercised when using this data, as it may not be accurate or complete. There are currently no plans to update.

Yukon Energy Corporation (YEC) Power Generating Stations are the industrial facilities where electrical power is generated. This data was provided by YEC and will be updated when new generating stations are constructed.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)