The Canadian Nuclear Safety Commission (CNSC) is publishing a database with environmental monitoring results collected as part of the Eastern Athabasca Regional Monitoring Program. The samples are collected near communities located in northern Saskatchewan.

The Canadian Nuclear Safety Commission (CNSC) and Environment and Climate Change Canada (ECCC) are publishing databases with effluent and environmental monitoring results from nuclear facilities located along the Ottawa River watershed as part of the Regional Information and Monitoring Network (RIMNet) for the Ottawa River Watershed Basin initiative. The facilities included are Chalk River Laboratories, Nordion Canada Inc., SRB Technologies Canada Inc., and Nuclear Power Demonstration Waste Facility. The initiative was developed to address questions and concerns expressed by members of the public and Indigenous Nations and communities about the availability of publicly accessible environmental monitoring data in the Ottawa River Watershed Basin. More information about the initiative is available here: https://www.cnsc-ccsn.gc.ca/eng/resources/environmental-protection/rimnet/ This dataset contains effluent and environmental monitoring results from Chalk River Laboratories, Nordion Canada Inc., SRB Technologies Canada Inc., and Nuclear Power Demonstration Waste Facility. All of the effluent and emissions releases to the environment in this dataset are below the CNSC licensed release limits. All of the environmental monitoring results in this dataset are below environmental quality guidelines. More information about CNSC staff’s assessment of these facilities are found in CNSC staff’s regulatory oversight reports: https://www.cnsc-ccsn.gc.ca/eng/resources/publications/reports/regulatory-oversight-reports/

This dataset contains location information for 2 of Ontario’s snow monitoring networks: * Surface Water Monitoring Centre (SWMC) * Snow Network for Ontario Wildlife (SNOW), administered by the Wildlife Research and Monitoring Section Snow course data is collected by: * conservation authorities * Ministry of Natural Resources (MNR) districts * Ontario Power Generation SWMC network data is collected twice a month from November 15 until May 15. SNOW network data is collected once a week from the first snowfall until snowmelt. The Surface Water Monitoring Centre uses the data to assess: * current snow cover * frozen ground conditions * snowpack * potential snowmelt * contributions to streamflow MNR’s Science and Research Branch use the data to: * help manage wildlife species including deer, moose, wild turkey, elk, wolves and coyotes * help ministry resource managers and scientists administer programs and conduct research * inform game management decisions such as white-tailed deer harvest quotas * support flight planning for the Moose Aerial Inventory program

A station is a site on a river or lake where water quantity (water level and flow) are collected and recorded.

RHAs/Health Regions are geographic areas which are used to define populations and catchment areas for the administration and delivery of health services. This file provides RHA boundaries for cartographic and analytical purposes.Within Manitoba there are five Regional Health Authorities (or "RHAs") responsible for the delivery of health services in five specific areas of the province described in the legislation as "health regions." (In practice, the terms "health region" and "RHA" are often used interchangeably to describe these geographic areas.). This file contains boundaries for the health regions for each Regional Health Authority in Manitoba. Fields included (Alias (Field Name): Field description.) RHA Code (RHACODE): Two-digit numeric code which uniquely identifies a specific legislatively defined RHA RHA Name (RHAName): This field contains a simple name for each RHA, suitable for use as a label, in English. Nom de l'office régionale de la santé (RHANomFr): This field contains a simple name for each RHA, suitable for use as a label, in French. RHA Area - total (sq km) (RHAArea): The calculated geodesic area, in square kilometres, of the area within a given RHA's boundaries. RHA Area - excludes major lakes (sq km) (LandArea): The calculated geodesic area, in square kilometres, of the area within a given RHA's boundaries, with the area of major lakes excluded. For population density calculations, we recommend the use of this area value. The following major lakes have been excluded: Lake Winnipeg, Lake Manitoba, Lake Winnipegosis, and Cedar Lake.

Landscape Management Units for the 2019 Peel Watershed Regional Land Use Plan. For more information, please refer to [https://yukon.ca/peel-watershed-regional-land-use-plan](https://yukon.ca/peel-watershed-regional-land-use-plan)Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

The hydrographic 1991 to 2020 climatology for the Maritimes region Atlantic Zone Monitoring Program core transects, Cabot Strait, Louisbourg, Halifax, Browns Bank, and Northeast Channel, are calculated to support annual reporting on seasonal variability. Details on data coverage for these transects and ancillary transects occupied since the inception of the program are provided. Comparisons with the previous climatology period, years 1981 to 2010, are summarized when possible.Cite this data as: Layton, C. Data of:Maritimes Region Atlantic Zone Monitoring Program 1991 to 2020 Hydrographic Transect Climatology.Published: August 2025. Ocean Ecosystems Science Division, Fisheries and Oceans Canada, Dartmouth, N.S.https://open.canada.ca/data/en/dataset/5f9c5d65-3ce1-4bdd-8b43-34086620d1e3

Community Areas are a standard analytical and service delivery geography for the city of Winnipeg and the Winnipeg Regional Health Authority.Community Areas are a standard analytical and service delivery geography for the city of Winnipeg and the Winnipeg Regional Health Authority.  The Community Areas geographic areas were developed by the Community Data Network (now more commonly referred to as the Winnipeg Community Data Consortium), with input from the WRHA, Manitoba Health, the City of Winnipeg, and other stakeholders. Community areas can be defined to either include or exclude the municipalities of East and West St. Paul. Because the Winnipeg RHA is defined to include East and West St. Paul, use of the geographies in a health services or health status context includes East and West St. Paul. Conversely, because the City of Winnipeg excludes East and West St. Paul, use of the geographies in a municipal administrative context excludes East and West St. Paul. This shapefile reflects the use of Community Areas in a health services or health status context, and includes East and West St. Paul.

Phytoplankton counts (cell/L)) at the 3 fixed stations and some of the 46 stations grouped into Atlantic Zone Monitoring Program (AZMP) transects under Quebec region responsibility.Phytoplankton data counts at AZMP stations in June 2014, 2018 and 2019 are displayed as 5 layers: Diatoms, Dinoflagellates, Flagellates, Protozoans and Total Phytoplankton. Another layer displays the fixed stations Rimouski, Anticosti Gyre and Gaspe Current and the attached files contain the phytoplankton data acquired at those stations: a .png file for each one, showing time series of counts for the 5 groups, and a .csv file containing the data themselves (columns : Latitude,Longitude, Date(UTC), Depth_min/Profondeur_min(m), Depth_max/Profondeur_max(m), Diatoms/Diatomées(cells/L), Dinoflagellates/Dinoflagellés(cells/L), Flagellates/Flagellés(cells/L), Protozoans/Protozoaires(cells/L), Phytoplankton/Phytoplancton(cells/L)).PurposeThe Atlantic Zone Monitoring Program (AZMP) was implemented in 1998 with the aim of increasing the Department of Fisheries and Oceans Canada’s (DFO) capacity to detect, track and predict changes in the state and productivity of the marine environment.The AZMP collects data from a network of stations composed of high-frequency monitoring sites and cross-shelf sections in each following DFO region: Québec, Gulf, Maritimes and Newfoundland. The sampling design provides basic information on the natural variability in physical, chemical, and biological properties of the Northwest Atlantic continental shelf. Cross-shelf sections sampling provides detailed geographic information but is limited in a seasonal coverage while critically placed high-frequency monitoring sites complement the geography-based sampling by providing more detailed information on temporal changes in ecosystem properties.In Quebec region, two surveys (46 stations grouped into transects) are conducted every year, one in June and the other in autumn in the Estuary and Gulf of St. Lawrence. Historically, 3 fixed stations were sampled more frequently. One of these is the Rimouski station that still takes part of the program and is sampled about weekly throughout the summer and occasionally in the winter period.Annual reports (physical, biological and a Zonal Scientific Advice) are available from the Canadian Science Advisory Secretariat (CSAS), (http://www.dfo-mpo.gc.ca/csas-sccs/index-eng.htm).Devine, L., Scarratt, M., Plourde, S., Galbraith, P.S., Michaud, S., and Lehoux, C. 2017. Chemical and Biological Oceanographic Conditions in the Estuary and Gulf of St. Lawrence during 2015. DFO Can. Sci. Advis. Sec. Res. Doc. 2017/034. v + 48 pp.Supplemental InformationPhytoplankton samples are collected using Niskin bottles, preserved with acid Lugol solution and analysed according to AZMP sampling protocol:Mitchell, M. R., Harrison, G., Pauley, K., Gagné, A., Maillet, G., and Strain, P. 2002. Atlantic Zonal Monitoring Program sampling protocol. Can. Tech. Rep. Hydrogr. Ocean Sci. 223: iv + 23 pp.

This polygon layer shows the spatial distribution of forecasted accumulated precipitation across watershed sub‑basins using data derived from the Regional Ensemble Prediction System (REPS). In other words, it aggregates precipitation amounts—computed from processed REPS forecast output (converted from GRIB2 files into raster [TIF] format)—over defined watershed boundaries to provide a detailed view of expected rainfall over a typical 72‑hour forecast period. This information supports regional hydrological forecasting, flood risk analysis, and water resource management.REPS forecast data are first processed to extract the accumulated precipitation field (APCP) and converted into high‑resolution raster images. These “REPS APCP rasters” represent the spatial distribution of forecast precipitation (in millimeters) over the region. Next, using pre‑defined watershed or sub‑basin boundaries, zonal statistics are applied to compute the average precipitation for each sub‑basin. The final layer displays these averaged values as polygon features, highlighting variations in forecasted rainfall across different drainage areas. This approach helps users pinpoint regions that may receive higher or lower rainfall, thereby enhancing hydrological assessments and emergency planning.