A research survey on snow crab (Chionoecetes opilio) was conducted from July 1 to July 17, 2018 on the Lower North Shore of the Gulf of St. Lawrence between Havre-Saint-Pierre and Blanc-Sablon. The main objective of this survey was to assess the abundance of snow crab and benthic species associated with snow crab habitat. Only data for benthic species associated with snow crab habitat are presented in this dataset.Data were collected according to a fixed station sampling design consisting of 61 stations, between 46 and 230 meters depth. Specimens were collected using a beam trawl with a total width of 2.8 meters and a total height of 0.76 meters. The codend was lined with a 16 millimeter stretched mesh net in order to harvest the small individuals. The hauls were made at a target speed of 2 knots and a target duration of 10 minutes depending on seabed conditions. Start and end positions were recorded to calculate the distance traveled on each tow using the geosphere library in R. The average tow distance was approximately 25 m. The area covered at each tow was the product of the trawl opening and the distance traveled.The two files provided (DarwinCore format) are complementary and are linked by the "eventID" key. The "Activity_Information" file includes generic activity information, including date and location. The "occurrence_taxon" file includes the taxonomy of the species observed, identified to the species or lowest possible taxonomic level. To obtain the abundance and biomass assessment, contact Cedric Juillet (cedric.juillet@dfo-mpo.gc.ca).For quality controls, all taxonomic names were checked against the World Register of Marine Species (WoRMS) to match recognized standards. The WoRMS match was placed in the "ScientificIDname" field of the occurrence file. Special cases were noted in the "commentsIdentification" field and selected specimens were confirmed with field photos. Data quality checks were performed using the R obistools and Worms libraries. All sampling locations were spatially validated.

A research survey on American lobster (Homarus americanus) has been conducted annually in the Magdalen Islands since 1995 to assess the abundance and structure of lobster populations in this area. Starting in 2007, the main objective was modified to include the diversity and abundance of benthic species associated with lobster habitat. Only benthic species data associated with lobster habitat are presented in this dataset.Surveys were generally conducted during the first two weeks of September from 2007 to 2020 on the entire south side of the Magdalen Islands, from Grosse-Île to Havre-Aubert. The sampling plan consists of 70 trawl tows on 50 fixed stations, between 4 and 35 meters in depth. Some stations had double tows. Specimens were collected using a Nephrops-type door trawl with a total width of 3.04 meters consisting of four Vexar™ lined baskets of 19 millimeter mesh size in order to harvest small individuals. Start and end positions were recorded to calculate the distance traveled at each tow using the geosphere library in R. The year 2011 is not included in the dataset, as biodiversity data were not recorded. Since 2017, the average tow distance has been reduced from 1000 meters to 500 meters. The opening of the trawl is also noted every minute throughout the duration of the tow so that the area sampled can be calculated. The area covered in each tow was the product of the trawl opening and the distance traveled.The two files provided (DarwinCore format) are complementary and are linked by the "eventID" key. The "Event_data" file includes generic activity information, including date and location. The "Occurrence" file includes the taxonomy of the observed species, identified to the species or lowest possible taxonomic level. For abundance and biomass estimates, contact Benoît Bruneau (Benoit.Bruneau@dfo-mpo.gc.ca).For quality controls, all taxonomic names were checked against the World Register of Marine Species (WoRMS) to match recognized standards. The WoRMS match was placed in the "ScientificnameID" field of the occurrence file. Special cases were noted in the "identificationRemarks" field and selected specimens were confirmed with field photos mentioned in "associatedMedia". Data quality checks were performed using the R obistools and WORMS libraries. All sampling locations were spatially validated.

A research survey on snow crab (Chionoecetes opilio) was conducted from May 2006 to May 2009 in the Bay of Ste. Marguerite near Sept-Îles, Quebec. The main objective of this survey was to assess the abundance of snow crab and benthic species associated with snow crab habitat. Only data for benthic species associated with snow crab habitat are presented in this dataset.Data were collected according to a fixed station sampling design consisting of 79 stations, between 7 to 198 meters depth. Specimens were collected using a beam trawl. The codend was lined with a small stretched mesh net in order to harvest the small individuals. The hauls were made at a target duration of 15 minutes. Start and end positions were recorded to calculate the distance traveled on each tow using the geosphere library in R. The two files provided (DarwinCore format) are complementary and are linked by the "eventID" key. The "Activity_Information" file includes generic activity information, including date and location. The "occurrence_taxon" file includes the taxonomy of the species observed, identified to the species or lowest possible taxonomic level. To obtain the abundance and biomass assessment, contact Bernard Sainte-Marie (Bernard.Sainte-Marie@dfo-mpo.gc.ca).For quality controls, all taxonomic names were checked against the World Register of Marine Species (WoRMS) to match recognized standards. The WoRMS match was placed in the "ScientificnameID" field of the occurrence file. Data quality checks were performed using the R obistools and worrms libraries. All sampling locations were spatially validated.

A research survey on snow crab (Chionoecetes opilio) was conducted from July 7 to July 26, 2019 in the Estuary St. Lawrence River between Forestville, Baie-Comeau and Matane. The main objective of this survey was to assess the abundance of snow crab and benthic species associated with snow crab habitat. Only data for benthic species associated with snow crab habitat are presented in this dataset.Data were collected according to a fixed station sampling design consisting of 66 stations, between 31 and 279 meters depth. Specimens were collected using a beam trawl with a total width of 2.8 meters and a total height of 0.76 meters. The codend was lined with a 16 millimeter stretched mesh net in order to harvest the small individuals. The hauls were made at a target speed of 2 knots and a target duration of 15 minutes. Start and end positions were recorded to calculate the distance traveled on each tow using the geosphere library in R. The average tow distance was approximately 25 m. The area covered at each tow was the product of the trawl opening and the distance traveled.The two files provided (DarwinCore format) are complementary and are linked by the "eventID" key. The "Activity_Information" file includes generic activity information, including date and location. The "occurrence_taxon" file includes the taxonomy of the species observed, identified to the species or lowest possible taxonomic level. To obtain the abundance and biomass assessment, contact Cedric Juillet (cedric.juillet@dfo-mpo.gc.ca).For quality controls, all taxonomic names were checked against the World Register of Marine Species (WoRMS) to match recognized standards. The WoRMS match was placed in the "ScientificnameID" field of the occurrence file. Data quality checks were performed using the R obistools and worrms libraries. All sampling locations were spatially validated.

A research survey on Stimpson's surfclam (Mactromeris polynyma) was conducted from June 15 to June 26 2017 in the Estuary of the St. Lawrence River on the Forestville deposit (Fishing Area 1A). The primary objective of this survey was to investigate the spatial distribution of pre-commercial (< 80 mm) and commercial (≥ 80 mm) sizes of Stimpson's surfclams as well as to assess the abundance and diversity of benthic species associated with the sandy habitat of the Stimpson's surfclam. Only benthic species data associated with Stimpson's surfclam habitat are presented in this dataset.Data were collected according to a systematic sampling design consisting of 77 stations, between 7 and 45 m depth. Stations were spaced 200 m apart and dispersed along a total of 18 transects perpendicular to the bathymetry. Transects were parallel and spaced 500 m apart. Specimens were collected using a hydraulic dredge of the "New England" type with a total length of 2.29 meters and a total width of 1.68 meters, of which 1.35 meters was knife width. The dredge was lined with a 19 millimeter mesh Vexar™ to harvest small individuals. The hauls were made at a speed of 0.2-0.3 knots for a duration of 2 to 3 minutes. Start and end positions were recorded to calculate the distance traveled at each tow using the geosphere library in R. The average tow distance was approximately 25 m. The area covered at each stroke was the product of the width of the dredge blade and the distance.The three files provided (DarwinCore format) are complementary and are linked by the "eventID" key. The "event_information" file includes generic event information, including date and location. The "additional_information_event_and_occurrence" file includes sample size, sampling protocol and sampling effort, among others. The "taxon_occurrence" file includes the taxonomy of the species observed, identified to the species or lowest possible taxonomic level. For abundance and biomass estimates, contact Virginie Roy (virginie.roy@dfo-mpo.gc.ca).For quality controls, all taxonomic names were checked against the World Register of Marine Species (WoRMS) to match recognized standards. The WoRMS match was placed in the "scientificNameID" field of the occurrence file. Special cases were noted in "identificationRemarks" and selected specimens were confirmed using field photos. Data quality checks were performed using the R obistools and worrms libraries. All sampling locations were spatially validated.

The Fish and Wildlife Enforcement Unit dataset is comprised of the polygons representing Fish and Wildlife Enforcement Units in Alberta. Alberta Public Safety and Emergency Services, Government of Alberta, manages the Fish and Wildlife enforcement services to provide the public and other government departments' information regarding the locations of Fish and Wildlife Enforcement Units throughout the province.

Historical finds of Coleophora serratella

These data consist of the Recreational Shark Fishing Tournament landings database (1993-2022 inclusive) and the Canadian Dart tag database (2006 onwards; updated annually). Both were collected by the Maritimes Science Division of Fisheries and Oceans Canada. The landings records include biological sampling from 4266 animals and the dart tag records include 4138 tagging and 97 recapture events to date. Potential users should consult Bowlby et al. (2022) for the description, management history, and technical details pertaining to these data. Information is focused on Blue Sharks because they were the primary species captured at recreational tournaments.Cite this data as: Bowlby, H., Joyce, W. Recreational Shark Fishing Tournament Landings Data and Canadian Dart Tag Database. Published January 2023 . Population Ecology Division, Fisheries and Oceans Canada, Dartmouth, N.S. https://open.canada.ca/data/en/dataset/4309f1f7-6779-416d-9660-c02f0f99b482

The basking shark (Cetorhinus maximus), is a species found in Atlantic Canadian waters which is mostly encountered “basking” on the surface waters and sometimes caught accidentally in commercial fisheries. One Pop-up Satellite Archival Tag (PSAT Mk10) from Wildlife Computers was applied to a single female basking shark in September 2008 on a commercial vessel to collect data on depth (pressure), temperature and ambient light level (for position estimation). The basking shark was 610 cm Total Length (curved). The tag released on the pre-programmed date 125 days after deployment. Raw data transmitted from the PSAT’s after release was processed through Wildlife Computers software (GPE3) to get summary files, assuming a maximum swimming speed of 2m/s, NOAA OI SST V2 High Resolution data set for SST reference and ETOPO1-Bedrock dataset for bathymetry reference. The maximum likelihood position estimates are available in .csv and .kmz format and depth and temperature profiles are also in .csv format. Other tag outputs as well as metadata from the deployment can be obtained upon request from: warren.joyce@dfo-mpo.gc.ca or heather.bowlby@dfo-mpo.gc.ca.

Fishing event (e.g., day, time, location, catch effort), and associated biological data from the Standardized Inlet Survey component of the annual Sablefish Research and Assessment Survey on the British Columbia coast.IntroductionDFO and the Canadian Sablefish Association undertake a collaborative fishery-independent annual research survey under a joint agreement. The survey employs longline trap gear to obtain catch rate data, gather biological samples, capture oceanographic measurements, and collect tag release and recapture data.Data summaries are provided here for standardized sets conducted at fixed stations within mainland inlets. The design of the sablefish survey has developed over time by incorporating and discontinuing components, including individual experimental studies (not available on OpenData). This Standardized Inlet Survey component differs in methodology from the other two survey components: (1) Offshore stratified random survey (2003 – present; available on OpenData using link below), and(2) Standardized trap survey – offshore indexing and offshore tagging (1990 – 2010; not yet available on OpenData). For the Standardized Inlet Survey, sets are allocated to five specific polygons in each of the following four inlet areas: Portland Inlet, Gil Island, Finlayson Channel, and Dean/Burke Channel. All four inlets were surveyed consistently between 2003 and 2019. No inlets were surveyed in 2020, and a single inlet was surveyed each year since 2021. Survey procedures are standardized and documented in Canadian Technical Reports of Fisheries and Aquatic sciences.Data tables provided for the Standardized Inlet Survey include (i) Effort, (ii) Catch, and (iii) Biological Information.Inlet EffortThis table contains information about annual survey trips and fishing events (sets). Trip-level information includes the year the survey took place, a unique trip identifier, the vessel that conducted the survey and the trip start and end dates (the dates the vessel was away from the dock conducting the survey). Set-level information includes the inlet name, date, time, location and depth that fishing took place, soak time, and number of traps deployed. All successful fishing events are included, where successful sets are those that met survey design specifications.Inlet CatchThis table contains the catch information from successful fishing events. Catch is identified to species or to the lowest taxonomic level possible. Catch is recorded as fish counts and / or weight. The unique trip identifier and set number are included so that catches can be related to the fishing event information (including capture location) for each set.Inlet Biological InformationThis table contains the biological data for sampled catches. Data may include any or all of length, weight, sex, maturity and age. Most of the sampled catch is Sablefish; however, some biological information has been collected for other species. Age structures are collected and are archived until required for analyses; therefore, all existing structures have not been aged. Tissue samples (usually a fin clip) may be collected for genetic (DNA) analysis for specific species. Tissue samples may be archived until required for analysis; for more information please see the data contacts. The unique trip identifier and set number are included so that samples can be related to the fishing event and catch information.