The National Hydro Network (NHN) focuses on providing a quality geometric description and a set of basic attributes describing Canada's inland surface waters. It provides geospatial digital data compliant with the NHN Standard such as lakes, reservoirs, watercourses (rivers and streams), canals, islands, drainage linear network, toponyms or geographical names, constructions and obstacles related to surface waters, etc. The best available federal and provincial data are used for its production, which is done jointly by the federal and interested provincial and territorial partners. The NHN is created from existing data at the 1:50 000 scale or better. The NHN data have a great potential for analysis, cartographic representation and display and will serve as base data in many applications. The NHN Work Unit Limits were created based on Water Survey of Canada Sub-Sub-Drainage Area.

The Canadian Hydrospatial Network (CHN) is an analysis-ready geospatial network of features that help enable the modelling of surface water flow in Canada. The six main layers and feature types are: flowlines, waterbodies, catchments, catchment aggregates, work units, and hydro nodes. Where possible the CHN is derived from high resolution source data such as Light Detection and Ranging (LiDAR) derived Digital Elevation Models (DEMs) and aerial imagery, to name a few. If existing provincial or territorial hydrographic networks meet the standards, they are incorporated into the CHN, otherwise automatic extraction methods are used on the high-resolution source data. To provide full network connectivity, if neither of these methods is possible in a region, the NHN is converted into the CHN until higher-resolution source data is available.Additional value-added attributes are included in the CHN to aid modelling, such as stream order and reach slope. The CHN physical model and features are also closely aligned and harmonized with the USGS 3DHP hydrographic network, which aids trans-border modelling. Where possible geonames (i.e. toponyms) are also added.The CHN is produced and disseminated by hydrologically connected geographic areas called work units. Work units can contain just one watershed, several small adjacent watersheds outletting into a large body of water, or be one of many parts of a larger watershed. In all cases, the features of a work unit are hydrologically connected. This is a more natural approach to data delivery, in comparison to data that is split into tiles. A generalized work unit index file is provided in the downloads to help users decide which files to download.For more information on the CHN please visit the project webpage: https://natural-resources.canada.ca/canadian-hydrospatial-network

Notice - Replacement of the English and French Web services (WMS and ESRI REST) with a bilingual one.The NRN product is distributed in the form of thirteen provincial or territorial datasets and consists of two linear entities (Road Segment and Ferry Connection Segment) and three punctual entities (Junction, Blocked Passage, Toll Point) with which is associated a series of descriptive attributes such as, among others: First House Number, Last House Number, Street Name Body, Place Name, Functional Road Class, Pavement Status, Number Of Lanes, Structure Type, Route Number, Route Name, Exit Number. The development of the NRN was realized by means of individual meetings and national workshops with interested data providers from the federal, provincial, territorial and municipal governments. In 2005, the NRN edition 2.0 was alternately adopted by members from the Inter-Agency Committee on Geomatics (IACG) and the Canadian Council on Geomatics (CCOG). The NRN content largely conforms to the ISO 14825 from ISO/TC 204.

To identify the overall reach and configuration of the Capital Pathway, show the location of existing pathways (as of 2020) and proposed pathway segments, and distinguish between discovery routes and feeder links.Capital Pathway Strategic Plan, October 2020 https://ncc-website-2.s3.amazonaws.com/documents/Pathways-BOOK-10-15-2020-EN_Final_Compressed.pdf

The Integrated Resource Plan - Local dataset is comprised of all the polygons that represent the Local Integrated Resource Plans (IRP) in Alberta. A Local IRP provides land resource management direction for a relatively smaller geographic planning area. A Local Plan is developed to provide more detailed land and resource use parameters than may be available in a Sub-Regional Plan. An IRP is a plan which identifies the values and associated land and resource management goals for the planning area in consideration of the maintenance of social, economic, and ecological values. An IRP provides direction regarding the type of land and resource management activity that would facilitate meeting the stated objectives in the planning area (e.g. recreation, grazing, industrial and commercial activities). The public was often involved in contributing input to the development of an IRP. IRPs were endorsed by the Government of Alberta in various periods.

Highway Planning and Design's 2016 Manitoba Road Network.The 2016 Manitoba Road Network was created by Manitoba Infrastructure --> Highway Engineering--> Highway Planning and Design. The department’s linear referencing system (LRS) uses Control Sections as a linear referencing method (LRM). The LRM is the digital representation of the Highway Network in Manitoba. The features indicate highway number and highway identity. This data was corrected using 1:60,000 digital ortho aerial photography dated from 1991-1998. Linear features have been updated on a yearly basis using GPS data, CAD files and 50cm imagery from 2007-2014, and is considered accurate to two-to-seven metres. Please note that this feature layer primarily contains only the roads that Manitoba Infrastructure is responsible for, i.e. Provincial Trunk Highways, Provincial Roads and Access Roads. However, you may also see Earth Roads (under construction) or Other roads (such as those passing through national parks and are federal responsibility). A newer version of this data is available: Manitoba Road Network 2018. Field List - FIELD NAME (Field Alias (i.e. display name)) in parenthesis) OBJECTID (OBJECTID) - Sequential, unique whole numbers are automatically generated. SHAPE (SHAPE) - A field to hold geometry information. ID (ID) - Unique Identifier generated by Oracle. CS_ID (Control Section ID) - Non unique identifier linking segment to its respective control section. ROAD_NO_SIGNED (Road Number Signed) - The road number. Note though, that in the case of co-routes, the lower highway number appears. This is a text field and differs from ROAD_NO only where there are city routes, for example 1A. ROAD_LOCATION (Road Location) - Access Road locations. DESCRIPTION (Road Description) - A text description of the start and end locations of each segment. CS_KEY (Control Section Key) - An information rich key containing Region (two digits), Road Number (three digits), Section number (three digits), the Road Type (one character), and direction of travel (one character). REGION_NO (MI Region) - The Manitoba Infrastructure region the segment is in. Regions 1-5. ROAD_NO (Road Number) - The road number. Note co-routes will have the lesser highway number. SECTION_NO (Section Number) - The control section's section number. START_KM (Start Kilometre (KM)) - The beginning of the Control Section (always zero). END_KM (End Kilometre (KM)) - The number of kilometres to the end of the Control Section. LENGTH_KM (Length Kilometres (KM)) - End Kilometre minus the Start Kilometre. ROAD_TYPE (Road Type) - The road type, i.e. PTHs, PRs, and Access Roads (Earth roads under construction may also be included). ROAD_DIRECTION (Road Direction) - A = ahead direction on a divided highway (i.e. following the digitizing direction), B = Back direction on a divided Highway (i.e. against the digitizing direction, and U= an undivided highway. ROAD_IDENTITY (Road Identity) - Road identity i.e. Provincial Road, Earth Road, Access Road and Other Road. NATIONAL_HIGHWAY_CLASS (National Highway Classification) - The national highway classification standard. START_DATE (Start Date) - The date the segment was created in the database. INVENTORY_YEAR (Inventory Year) - The year the road segment was opened to the public. SHAPE_Length (Segment Length) - An automatically generated length field based on geometry.

The spatial representation for a Tree Farm Licence Addition, which is forest land designated by the Ministry to be added to an established Tree Farm Licence Schedule A or B For further information on Tree Farm Licenses please visit this website: https://www2.gov.bc.ca/gov/content?id=A93E6DFD8C164AD19CD17880450289A3

ROADSEG is one of the important layers for Saskatchewan Upgraded Road Network (SURN) and National Road Network (NRN). The ROADSEG is created to serve a diverse group of clients that require relatively up-to-date and accurate description of Saskatchewan Road Network.ROADSEG contains all the features from HIGHWAY_OFFICIAL, RURAL_ROAD_OFFICIAL and OTHER_ROAD_OFFICIAL. ROADSEG is the Saskatchewan road network data that is being used by NRCAN as National Road Network (NRN). ROADSED data layer has been generated by merging HIGHWAY_OFFICIAL, RURAL_ROAD_OFFICIAL and OTHER_ROAD_OFFICIAL. Unique Identifiers (NID) is associated with each line segment. "NID" National Identifier is used to manage the updates between data producer and data users. ROADSEG data layer is one of the important data table for SURN, NRN, SASK911, CAR, SGI-iHaul and other applications.

The spatial representation for a Tree Farm Licence Schedule A, which is private land or timber owned by the Tree Farm licence holder that is part of the Established Tree Farm Licence. These private lands can be inside or outside the main body of the Tree Farm Licence For further information on Tree Farm Licenses please visit this website: https://www2.gov.bc.ca/gov/content?id=A93E6DFD8C164AD19CD17880450289A3

The Ontario Hydro Network (OHN) is a provincial medium scale originating from data with regional scales of 1: 10,000 in Southern Ontario, 1: 20,000 in Northern Ontario and 1: 50,000 in the Far North. The shoreline is taken from the OHN - Waterbody data class. This data is used for cartographic purposes and web mapping services. This product requires the use of geographic information system (GIS) software. [Ontario Hydro Network (OHN) User Guide (Word)](https://www.sdc.gov.on.ca/sites/MNRF-PublicDocs/EN/CMID/OHN%20-%20UserGuide.docx)