The National Hydro Network (NHN) focuses on providing a quality geometric description and a set of basic attributes describing Canada's inland surface waters. It provides geospatial digital data compliant with the NHN Standard such as lakes, reservoirs, watercourses (rivers and streams), canals, islands, drainage linear network, toponyms or geographical names, constructions and obstacles related to surface waters, etc. The best available federal and provincial data are used for its production, which is done jointly by the federal and interested provincial and territorial partners. The NHN is created from existing data at the 1:50 000 scale or better. The NHN data have a great potential for analysis, cartographic representation and display and will serve as base data in many applications. The NHN Work Unit Limits were created based on Water Survey of Canada Sub-Sub-Drainage Area.

The Canadian Hydrospatial Network (CHN) is an analysis-ready geospatial network of features that help enable the modelling of surface water flow in Canada. The six main layers and feature types are: flowlines, waterbodies, catchments, catchment aggregates, work units, and hydro nodes. Where possible the CHN is derived from high resolution source data such as Light Detection and Ranging (LiDAR) derived Digital Elevation Models (DEMs) and aerial imagery, to name a few. If existing provincial or territorial hydrographic networks meet the standards, they are incorporated into the CHN, otherwise automatic extraction methods are used on the high-resolution source data. To provide full network connectivity, if neither of these methods is possible in a region, the NHN is converted into the CHN until higher-resolution source data is available.Additional value-added attributes are included in the CHN to aid modelling, such as stream order and reach slope. The CHN physical model and features are also closely aligned and harmonized with the USGS 3DHP hydrographic network, which aids trans-border modelling. Where possible geonames (i.e. toponyms) are also added.The CHN is produced and disseminated by hydrologically connected geographic areas called work units. Work units can contain just one watershed, several small adjacent watersheds outletting into a large body of water, or be one of many parts of a larger watershed. In all cases, the features of a work unit are hydrologically connected. This is a more natural approach to data delivery, in comparison to data that is split into tiles. A generalized work unit index file is provided in the downloads to help users decide which files to download.For more information on the CHN please visit the project webpage: https://natural-resources.canada.ca/canadian-hydrospatial-network

Many geometrical schemes - or map projections - are used to represent the curved surface of the Earth on map sheets. Canada uses the **Universal Transverse Mercator** (UTM) system. It is called transverse because the strips run north-south rather than east-west along the equator.This data class shows a 100 km x 100 km grid coordinate system based on the UTM projection using the North American Datum 83 (NAD83). It includes: * Military Grid Reference * Atlas identifier

Many geometrical schemes - or map projections - are used to represent the curved surface of the Earth on map sheets. Canada uses the Universal Transverse Mercator (UTM) system. It is called transverse because the strips run north-south rather than east-west along the equator. This data class shows a 1 km x 1 km UTM NAD83 grid that is a standard reference index for Ontario. It includes: * Military Grid Reference * Fire Base Map identifier * Fire Base Map Block * Atlas identifier

Many geometrical schemes - or map projections - are used to represent the curved surface of the Earth on map sheets. Canada uses the **Universal Transverse Mercator** (UTM) system. It is called transverse because the strips run north-south rather than east-west along the equator. This data class shows a 5 km x 5 km grid coordinate system based on the UTM projection using the North American Datum 83 (NAD83). It includes a UTM Map Sheet Number.

Notice - Replacement of the English and French Web services (WMS and ESRI REST) with a bilingual one.The NRN product is distributed in the form of thirteen provincial or territorial datasets and consists of two linear entities (Road Segment and Ferry Connection Segment) and three punctual entities (Junction, Blocked Passage, Toll Point) with which is associated a series of descriptive attributes such as, among others: First House Number, Last House Number, Street Name Body, Place Name, Functional Road Class, Pavement Status, Number Of Lanes, Structure Type, Route Number, Route Name, Exit Number. The development of the NRN was realized by means of individual meetings and national workshops with interested data providers from the federal, provincial, territorial and municipal governments. In 2005, the NRN edition 2.0 was alternately adopted by members from the Inter-Agency Committee on Geomatics (IACG) and the Canadian Council on Geomatics (CCOG). The NRN content largely conforms to the ISO 14825 from ISO/TC 204.

The dataset contains the digital boundaries for significant discovery licences, production licences, drilled wells, major pipelines and the jurisdictional boundary of the area administered by the Canada-Nova Scotia Offshore Energy Regulator (CNSOER), as well as the inactive Georges Bank permits formerly administered by the Canada Oil and Gas Lands Administration (COGLA). All production facilities have been removed and active projects were fully abandoned and decommissioned by November 2020. As of January 2022 there are no active exploration licences.A significant discovery licence (SDL) may be issued for lands within a declared significant discovery area under the Accord Acts. The term of a significant discovery licence is indefinite and was designed to maintain an explorer's rights during the period between first discovery and eventual production. Significant discovery licence interest representatives in 2021 include BP Canada Energy Company, ExxonMobil Canada Ltd., ExxonMobil Canada Properties, Ovintiv Canada ULC, and Shell Canada Limited. Most of the SDLs predate the CNSOEB; they were issued at various times from 1980 to 1986 by COGLA before the Offshore Board existed. On January 5, 1990, they were all rolled into CNSOEB’s governance. The only exception is SDL 2702 which was issued June 6, 2007.A production licence (PL) gives interest holders the right to produce petroleum in an area which is subject to a declared commercial discovery. In order to be declared a commercial discovery, an operator must demonstrate that the discovery contains reserves that will justify the investment of capital and effort to bring the discovery to production. A production licence has a term of 25 years but may be extended if commercial production is continuing or is likely to recommence.Production licence interest representatives in 2021 include ExxonMobil Canada Ltd. and Ovintiv Canada ULC. The PLs were effective on the following dates:• 2901, 2902: 1991-04-01• 2903, 2904, 2905, 2906: 1999-07-06• 2907: 2003-10-31• 2908: 2004-11-25• 2909, 2910, 2911: 2010-12-31 Inactive Georges Bank permit interest representatives include BP Canada Energy Company and Chevron Canada Ltd.Each production licence, significant discovery licence and inactive Georges Bank permit polygon is a mapped representation of the permit interest abstract. The offshore area is divided into grid areas and permit interest abstracts are defined by this land division. The land division system consists of grid areas, sections, and units – all referenced to the North American Datum of 1927 (NAD27). For more information on the Canada lands defined areas (Land Division), See: Canada oil and gas regulations land division (https://laws-lois.justice.gc.ca/eng/regulations/C.R.C.%2C_c._1518/page-1.html#h-525569 or https://www.cnsopb.ns.ca/resource-library/land-division-guideline).The area of a PL or SDL can be found in the permit interest abstract for that licence, available for download on the CNSOER's website (https://www.cnsopb.ns.ca/sites/default/files/resource/interest_summary_table.pdf) . The directory of wells point dataset contains the surface locations for all wells drilled in Offshore Nova Scotia. The file includes well names, locations, spud dates, termination dates, rig table elevations, water depths, well total depth, well type (exploratory, delineation, production, or injector), well result, and current status. Original data for wells drilled prior to 1990 was collected and maintained by the Geological Survey of Canada and COGLA. Data are also available on the Basin database online (https://basin.gdr.nrcan.gc.ca/index_e.php). CNSOER’s directory of wells was last updated January, 2020.Jurisdictional boundary point and lines datasets define the outer limit of the jurisdiction of the CNSOER, as described in the Canada-Nova Scotia Offshore Petroleum Resources Accord Implementation Act - Schedule 1 (Canada-Nova Scotia Offshore Petroleum Resources Accord Implementation Act (https://laws-lois.justice.gc.ca/eng/acts/C-7.8/page-1.html)), excluding the 200-nautical mile exclusive economic zone (EEZ) limit as described under Part VI of the United Nations Convention on the Law of the Sea (https://www.un.org/Depts/los/convention_agreements/texts/unclos/unclos_e.pdf?msclkid=5309c2b9cfc911ecb5bb107f67772ec1). The offshore gas pipeline polyline dataset contains locations of major pipelines in the CNSOER's jurisdictional area, associated with petroleum production in offshore Nova Scotia. This file is considered to be approximate and is not an official record. Some pipeline coordinates are sourced from CAD documents (DXF), supplied by operators. Some were created using ArcMap, digitized from paper records. As of October 2021, all pipelines within this file have been fully flushed with sea water and abandoned.All shapefiles were transformed into the NAD83 datum using the NTv2 transformation.

GeoAI are buildings, hydrography, forests, and roads automatically extracted using Deep Learning models applied to a source dataset, typically aerial or satellite images. The primary aim of GeoAI is to increase Canada's availability of high-resolution foundational geospatial data for both spatial and temporal coverage.‌The infrastructure and expertise put in place by NRCan enables a rapid, efficient, and scalable data creation process through the use of leading-edge technology and Artificial Intelligence models. Published datasets for a given source can be revisited at a later date as more accurate models are developed and put into production. For now, only static files are available, but as the series develops, new products and services will be added.Several use cases of GeoAI data for change detection have been created. To view them, please follow the links below:- Iqaluit: https://open.canada.ca/data/en/dataset/ef29513d-a007-408c-beba-65f86e7b5b01- Calgary: https://open.canada.ca/data/en/dataset/bd07b597-5166-4b62-ae9c-245b3c62ea03- Québec City: https://open.canada.ca/data/en/dataset/4026720e-f7fb-478e-a58f-c62ebe20005d- Winnipeg: https://open.canada.ca/data/en/dataset/a6874aac-cfcd-4b92-bb3f-6031eedb5b57- Victoria: https://open.canada.ca/data/en/dataset/f011c7b9-f79e-42f8-9481-9bf9788bb189- Trois-Rivières: https://open.canada.ca/data/en/dataset/2b11a323-52c2-43d5-9c09-bc4b15b1bcc8

The Nova Scotia Hydrographic Network is an enhanced version of the Nova Scotia Topographic Database's Water Features theme. This dataset includes network spines for connectivity of water flow and various attribution for flow direction, priority of water flow and toponymic objects where applicable.

The Canada Basemap Transportation (CBMT) is a raster tile service that provides spatial reference context with an emphasis on transportation networks across Canada. It is designed especially for use as a background layer in a web mapping application or geographic information system (GIS). Access: Access is free of charge under the terms of the Open Government Licence - Canada.Data Sources: Data for the CBMT is sourced from the following datasets:- Topographic data of Canada – CanVec Series- Official names from the Canadian Geographical Names Database (CGNDB).Projections:- Data is provided in the EPSG:3978 (NAD83 Canada Atlas Lambert) projected coordinate system.- Data is provided in the EPSG:3857 (WGS84 Pseudo-Mercator) projected coordinate system.Geographic Coverage: - The CBMT in the EPSG:3857 has complete coverage of the world, with full datasets in Canada and only partial data in other parts of the world including boundaries, Country Names, and major cities.- The CBMT in the EPSG:3978 covers the entire geographic area of Canada and some major transportation routes and cities in the northern States of the USA.Additional Versions: - The CBMT is available as a dynamic service (WMS) or a tiled service (ESRI REST and WMTS). - A geometry-only version (CBMT GEOM) and a text-only version (CBMT TXT) are available. - French versions of the basemap are accessible via the Carte de base du Canada - Transport (CBCT).