These products are derived from RGB (red/green/blue) images, a satellite processing technique that uses a combination of satellite sensor bands (also called channels) and applies a red/green/blue (RGB) filter to each of them. The result is a false-color image, i.e. an image that does not correspond to what the human eye would see, but offers high contrast between different cloud types and surface features. The on-board sensor of a weather satellite obtains two basic types of information: visible light data (reflected light) reflecting off clouds and different surface types, also known as "reflectance", and infrared data (emitted radiation) which are short-wave and long-wave radiation emitted by clouds and surface features. RGBs are specially designed to combine this type of satellite data, resulting in an information-rich final product.Other products are based on the enhancement of channel data for a single wavelength, also aimed at highlighting meteorological features of the observed surface or clouds, but in a simpler way since only a single wavelength is involved. This older approach is still useful today, as its simplicity makes image interpretation easier in some cases.

These products are derived from RGB (red/green/blue) images, a satellite processing technique that uses a combination of satellite sensor bands (also called channels) and applies a red/green/blue (RGB) filter to each of them. The result is a false-color image, i.e. an image that does not correspond to what the human eye would see, but offers high contrast between different cloud types and surface features. The on-board sensor of a weather satellite obtains two basic types of information: visible light data (reflected light) reflecting off clouds and different surface types, also known as "reflectance", and infrared data (emitted radiation) which are long-wave radiations emitted by clouds and surface features. RGBs are specially designed to combine this type of satellite data, resulting in an information-rich final product. Four types of products are currently generated from the GOES-West and GOES-East satellites: "NightIR" and "NightMicrophysics", at 2km resolution, are generated 24 hours a day with infrared channels, so are visible both night and day, and "NaturalColour" and "DayCloudConvection", at 1km resolution, which combine visible light channels with infrared channels; their higher resolution makes the latter two products more popular, but they are not available during most of the night (between 02UTC and 07UTC for GOES-Est, and between 06UTC and 11UTC for GOES-Ouest) given the absence of reflected sunlight. Other RGB products should be added gradually in the future to meet different needs.

This layer represents Land use polygons as determined by a combination of analytic techniques, mostly using Landsat 5 image mosaics . BTM 1 was done on a federal satellite image base that was only accurate to about 250m. The images were geo-corrected, not ortho-corrected, so there is distortion in areas of high relief. This is not a multipart feature

Community Locations in the NWT with Satellite Image Base Map

Communities and Major Roads in the NWT with Satellite Image Base Map

This layer is the current fire year burn severity classification for large fires (greater than 100 ha). Burn severity mapping is conducted using best available pre- and post-fire satellite multispectral imagery acquired by the MultiSpectral Instrument (MSI) aboard the Sentinel-2 satellite or the Operational Land Imager (OLI) sensor aboard the Landsat-8 and 9 satellites. Every attempt is made to use cloud, smoke, shadow and snow-free imagery that was acquired prior to September 30th. However, in late fire seasons imagery acquired after September 30th may be used. This layer is considered an interim product for the 1-year-later burn severity dataset (WHSE_FOREST_VEGETATION.VEG_BURN_SEVERITY_SP). Mapping conducted during the following growing season benefits from greater post-fire image availability and is expected to be more representative of tree mortality. #### Methodology: • Select suitable pre- and post-fire imagery or create a cloud/snow/smoke-free composite from multiple images scenes • Calculate normalized burn severity ratio (NBR) for pre- and post-fire images • Calculate difference NBR (dNBR) where dNBR = pre NBR – post NBR • Apply a scaling equation (dNBR_scaled = dNBR*1000 + 275)/5) • Apply BARC thresholds (76, 110, 187) to create a 4-class image (unburned, low severity, medium severity, and high severity) • Mask out water bodies using a satellite-derived water layer • Apply region-based filters to reduce noise • Confirm burn severity analysis results through visual quality control • Produce a vector dataset and apply Euclidian distance smoothing

Satellite-based forest area consistent with FAO definitions for Canada. It is developed within the framework of Canada’s National Terrestrial Ecosystem Monitoring System (NTEMS). The forest area is based on the Food and Agricultural Organization of the United Nations (FAO) definition. The FAO definition incorporates land use, whereby trees removed by fire and harvesting for instance, remain forest as the trees will return. The included map displays the current forest cover for year as noted (i.e. 2022), plus the satellite-based temporally informed forest area where tree cover has been temporarily lost due to stand replacing disturbances (i.e., fire, harvest). For an overview of the methods, data, image processing, as well as information on accuracy assessment see Wulder et al. (2020).Open Access: Wulder, M.A., T. Hermosilla, G. Stinson, F.A. Gougeon, J.C. White, D.A. Hill, B.P. Smiley. (2020). Satellite-based time series land cover and change information to map forest area consistent with national and international reporting requirements. Forestry: An International Journal of Forest Research 93(3), 331-34, https://doi.org/10.1093/forestry/cpaa0063 . ( Wulder et al. 2020)

Satellite-based forest area consistent with FAO definitions for Canada. It is developed within the framework of Canada’s National Terrestrial Ecosystem Monitoring System (NTEMS). The forest area is based on the Food and Agricultural Organization of the United Nations (FAO) definition. The FAO definition incorporates land use, whereby trees removed by fire and harvesting for instance, remain forest as the trees will return. The included map displays the current forest cover for year as noted (i.e. 2022), plus the satellite-based temporally informed forest area where tree cover has been temporarily lost due to stand replacing disturbances (i.e., fire, harvest). For an overview of the methods, data, image processing, as well as information on accuracy assessment see Wulder et al. (2020).Open Access: Wulder, M.A., T. Hermosilla, G. Stinson, F.A. Gougeon, J.C. White, D.A. Hill, B.P. Smiley. (2020). Satellite-based time series land cover and change information to map forest area consistent with national and international reporting requirements. Forestry: An International Journal of Forest Research 93(3), 331-34, https://doi.org/10.1093/forestry/cpaa0063 . ( Wulder et al. 2020)

High-resolution false-color Landsat image composite of Canada's forested ecosystems (2022). This national image product represents the Composite to Change (C2C) proxy composite image derived from thousands of Landsat images acquired between July 1 and August 30, 2022. It is developed within the framework of Canada’s National Terrestrial Ecosystem Monitoring System (NTEMS). The overall process followed is described in (Hermosilla et al. 2016 ) with details on the generation of gap-free surface reflectance composites in ( Hermosilla et al. 2015). Following the motivation and rationale presented in White et al. (White et al. 2014), Landsat imagery is subjected to a series of processing steps to remove clouds and shadows as well as haze and other unwanted atmospheric effects. Year-on-year time series of Landsat imagery are interrogated to avoid missing values, and to ensure exhaustive spatial coverage of the national surface reflectance composites. False-colour 3-channel image (bands: shortwave infrared, SWIR1; near infrared; red)When using these data, please cite as: Hermosilla, T., M.A. Wulder, J.C. White, N.C. Coops, G.W. Hobart, L.B. Campbell, 2016. Mass data processing of time series Landsat imagery: pixels to data products for forest monitoring. International Journal of Digital Earth 9(11), 1035-1054 (Hermosilla et al. 2016 ).

The High Resolution Digital Elevation Model Mosaic provides a unique and continuous representation of the high resolution elevation data available across the country. The High Resolution Digital Elevation Model (HRDEM) product used is derived from airborne LiDAR data (mainly in the south) and satellite images in the north. The mosaic is available for both the Digital Terrain Model (DTM) and the Digital Surface Model (DSM) from web mapping services. It is part of the CanElevation Series created to support the National Elevation Data Strategy implemented by NRCan. This strategy aims to increase Canada's coverage of high-resolution elevation data and increase the accessibility of the products.Unlike the HRDEM product in the same series, which is distributed by acquisition project without integration between projects, the mosaic is created to provide a single, continuous representation of strategy data. The most recent datasets for a given territory are used to generate the mosaic. This mosaic is disseminated through the Data Cube Platform, implemented by NRCan using geospatial big data management technologies. These technologies enable the rapid and efficient visualization of high-resolution geospatial data and allow for the rapid generation of dynamically derived products. The mosaic is available from Web Map Services (WMS), Web Coverage Services (WCS) and SpatioTemporal Asset Catalog (STAC) collections. Accessible data includes the Digital Terrain Model (DTM), the Digital Surface Model (DSM) and derived products such as shaded relief and slope.The mosaic is referenced to the Canadian Height Reference System 2013 (CGVD2013) which is the reference standard for orthometric heights across Canada.Source data for HRDEM datasets used to create the mosaic is acquired through multiple projects with different partners.Collaboration is a key factor to the success of the National Elevation Strategy. Refer to the “Supporting Document” section to access the list of the different partners including links to their respective data.