Topographic maps produced by Natural Resources Canada conform to the National Topographic System (NTS) of Canada. Indexes are available in three standard scales: 1:1,000,000, 1:250,000 and 1:50,000. The area covered by a given mapsheet is determined by its latitude and longitude. 1:1,000,000 mapsheets are identified by a combination of three numbers (e.g. 098). 1:250,000 mapsheets are identified by a combination of numbers, and letters ranging from A through P (e.g. 098C). Sixteen smaller segments (1 to 16) form blocks used for 1:50,000 mapping (e.g. 098C03).

Notice: This layer is out of date and scheduled to be retired October 31, 2026.Yukon First Nations and Tetlit Gwich'in settlement lands including both rural blocks (R-block) and Fee Simple lands of the First Nations that have ratified their agreements. This data was built using the 1:1,000,000 Digital Chart of the World (DCW) as the base and the 1:30,000 signed Territorial Research Base Maps (TRBM) to define the boundaries.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps). Discover more digital map data and interactive maps from Yukon's digital map data collection. For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca) 

Base waterbody polygon arcs are feature type, source and capture date attributed arcs that make up the boundaries of base waterbody polygons in the Base Features Hydrography geospatial dataset. These arcs were collected from conversion processes of 1:20 000, 1:50 000 and AVI Provincial mapping datasets and 1:50 000 National Topographic Data Base (NTDB).

This dataset represents surface to bedrock isopach (thickness in metres) map of glacial drift for the Province of Saskatchewan at 1:1 000 000 scale.This dataset represents surface to bedrock isopach (thickness in metres) map of glacial drift at 1:1 000 000 scale. This data was created as a file geodatabase feature class and output for public distribution. **Please Note – All published Saskatchewan Geological Survey datasets, including those available through the Saskatchewan Mining and Petroleum GeoAtlas, are sourced from the Enterprise GIS Data Warehouse.  They are therefore identical and share the same refresh schedule. 

1:250,000 NTDB Cultural Point Features. Man made featuresDistributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

This is a vector cached Base Map that is utilizing the most commonly used datasets that are publically available from the Government of the North West Territories and the Government of Canada. It has been rendered from 1:25,000,000 down to 1:1,000 scale

This dataset is produced for the Government of Alberta and is available to the general public. Note that the distribution contact is different for the general public than for Government of Alberta ministries. Please consult the Distribution Information of this metadata for the appropriate contact to acquire this dataset. The National Topographic System of Canada (NTS) is a national mapping reference grid defined by Natural Resources Canada (NRCan) that is based on degrees of latitude and longitude. Starting at the Prime Meridian and at the Equator, the 1:50 000 grid is formed by intersecting every 1/8 degree of the meridians with every 1/4 degrees of parallels. It is also true that the standard 1:20 000 NTS block is broken down into 4 1:20 000 blocks that are labelled by quadrant. Each polygon in the grid is designated with a two digit number. a single letter. two additional numbers and a two letter quadrant value (Example 83H08NE). The 1:20 000 NTS grid was developed to support the Provincial Digital Base Mapping Project and is not part of the formal NRCan NTS program. The province of Alberta is covered by 2838 complete and 269 partially complete 1:20 000 NTS blocks.

This dataset is produced for the Government of Alberta and is available to the general public. Note that the distribution contact is different for the general public than for Government of Alberta ministries. Please consult the Distribution Information of this metadata for the appropriate contact to acquire this dataset. The National Topographic System of Canada (NTS) is a national mapping reference grid defined by Natural Resources Canada (NRCan) that is based on degrees of latitude and longitude. Starting at the Prime Meridian and at the Equator, the 1:50 000 grid is formed by intersecting every 1/4 degree of the meridians with every 1/2 degrees of parallels. It can also true that the standard 1:250 000 NTS block is broken down into 16 1:50 000 blocks that a numbered south to north alternating east to west then west to east from one to 16. Each polygon in the grid is designated with a two digit number. a single letter and two additional numbers (Example 83H08). The province of Alberta is covered by 670 complete and 131 partially complete 1:50 000 NTS blocks.

Line information containing elevation isobars to aid in the depiction of changes in elevation at 1:1,000,000 scale. (eg. mountain peaks or depressions). Contour lines captured at 1:1,000,000 scale from Digital Chart of the World data for the Yukon and surrounding area.Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)

The Alberta Provincial Digital Elevation Model has five components: the Alberta Provincial Terrain, the Alberta Provincial 25 Metre Raster, the Alberta Provincial 100 Metre Raster, the Alberta Provincial 25 Metre Hillshade and the Alberta Provincial 100 Metre Hillshade. The source data is contained within the feature dataset that houses the Alberta Provincial Terrain. The source data consists of feature classes generated from the mass points, soft breaklines and hard breaklines that were stored as ASCII generate files in 1:20 000 scale National Topographic System (NTS) blocks. The source data has three origins: Digital Elevation Model: Alberta 1980 1995 60K, Southwestern Alberta 1979 1996 50K and Northeastern Alberta 1955 1986 50K. These three datasets were processed separately and tiled seamlessly along their borders. The Digital Elevation Model Alberta 1980 1995 60K was compiled from 1:60 000 scale aerial photography using analytical stereoplotters with vegetation and structures excluded. The Digital Elevation Model Northeastern Alberta 1955 1986 50K dataset was created primarily from 1:50 000 scale contour and hydrography data acquired from Natural Resources Canada (NRCAN) with supplementary aerial triangulation points derived from 1:60 000 scale black and white aerial photography dating between 1980 and 1995. The Digital Elevation Model Southwestern Alberta 1979 1996 50K dataset was created primarily from 1:50 000 scale contour and hydrography data from Natural Resources Canada, using Geographic Information System (GIS) processes that recognise the relationship between surface contours and hydrography.