The Shore Unit Classifications Lines depict the most current Shorezone mapping lines for the Province of British Columbia. Shorezone is an aerial imaging, habitat classification, and mapping system used to inventory alongshore and across-shore geomorphological and biological attributes of the coast. Habitat attributes are interpreted from oblique aerial imagery acquired during the lowest tides of the year.

The Shore Unit Classifications Polygons depict the most current areas of Shorezone mapping for the Province of British Columbia. Shorezone is an aerial imaging, habitat classification, and mapping system used to inventory alongshore and across-shore geomorphological and biological attributes of the coast. Habitat attributes are interpreted from oblique aerial imagery acquired during the lowest tides of the year. The mapping project was first developed as an oil spill response tool for British Columbia, and now ShoreZone extends from Oregon to Alaska and has many other uses including ecological studies, marine conservation planning, coastal flooding and vulnerability assessments, and community education.

Fisheries and Oceans Canada (DFO) statistical unit areas (also referred to as unit areas) are smaller portions of the Northwest Atlantic Fisheries Organization (NAFO) Subareas, Divisions, and Subdivisions defined in the Convention on Cooperation in the Northwest Atlantic Fisheries (2020). The spatial representation of boundaries defined by NAFO has recently been updated to address inconsistencies and errors in earlier versions, which is available here: https://open.canada.ca/data/dataset/59af1c96-fc8f-4fa0-b398-d65e953eadaa#comment-41855. Unit areas are used by DFO for a variety of purposes including, but not limited to stock assessments, privacy screening of fisheries maps, and statistical analyses.Unit areas were originally defined throughout the 1940s and 1950s. Subsequently, several revisions and alternate versions were created by DFO in various regions leading to inconsistencies in spatial extent and naming conventions. These changes have not been formally documented. The datasets often have topological errors such as gaps and overlaps, especially along diagonals and coastlines. In addition, inconsistencies have arisen from conflicting interpretations of the NAFO divisions, where not all land points are defined by coordinates. Therefore, DFO, with input from the Canadian Hydrographic Service (CHS), has created an updated version of the DFO unit areas file to address inconsistencies and errors among previous versions. The recently updated NAFO divisions were used as the basis for an updated DFO unit areas file.This version of the DFO unit areas must not be used for legal purposes. Legal descriptions of fishing area boundaries can be found in the Atlantic Fisheries Regulations, Maritime Provinces Fishery Regulations, and DFO License Conditions.

A hydrogeological unit is defined as any soil or rock unit or zone that by virtue of its hydraulic properties has a distinct influence on the storage or movement of groundwater. It is considered the main dataset from the GGP point of view. Hydrogeological units are ranked into five levels (from largest to smallest): 1) hydrogeological region, 2) hydrogeological context, 3) aquifer system, 4) hydrostratigraphic unit, and 5) aquifer. Here are formal definitions for these different types of hydrogeologic units. - Hydrogeological region Hydrogeological regions are areas in which the properties of sub-surface water, or groundwater, are broadly similar in geology, climate and topography. There are 9 such regions identified in Canada (ref?). - Hydrogeological context Hydrogeological contexts are units of reporting, conceptually narrower than regions, and are additionally delineated by physiographic and hydrogeological aspects. - Aquifer system ""A heterogeneous body of intercalated permeable and poorly permeable material that functions regionally as a water-yielding hydraulic unit; it comprises two or more permeable beds [aquifers] separated at least locally by aquitards [confining units] that impede groundwater movement but do not greatly affect the regional hydraulic continuity of the system"" (Poland et al., 1972). - Hydrostratigraphic unit (HSU) ""Body of sediment and/or rock characterized by ground water flow that can be demonstrated to be distinct under both unstressed (natural) and stressed (pumping) conditions, and is distinguishable from flow in other HSUs"" (Noyes et al.) - Aquifer ""A formation, group of formations, or part of a formation that contains sufficient saturated permeable material to yield significant quantities of water to wells and springs"" (Lohman et al, 1972, p. 21). The rank attribute is used to specify the scope of the described unit. The general principle behind this specification is to allow the same data structure to apply to various types of hydrogeological units, from the local aquifer to the almost continental hydrogeological region. The dataset includes properties such as identification, physiography, geology, aquifer description and properties, water balance, groundwater use and risk. It features numerical values or a general description when no values are available. The description can also be used to add context to the numerical values. For each property, metadata identifying the source of the original data, links to similar data in GIN, and description of the processes, algorithms or methodology used to obtain these datasets will be available to complement the data. This dataset is designed to capture and represent a set of synthesized information pertaining to hydrogeological units through maps and succinct table reports. Some attributes (or properties) of the dataset are irrelevant depending of the rank of the unit. In general, this dataset is organised to include multiple properties associated with aquifers and larger hydrogeologic units. These properties are grouped into categories, which include identification, physiography, geology, aquifer description, water balance, groundwater use and risk. The numerical values associated with each of the properties can be used to create thematic maps; hence, the importance of using standardized units of measurement and definitions for these properties. When numerical values are not available, a general description may be supplied instead. The description can also be used to add context to the numerical values. Because this dataset is the cornerstone of the national view on groundwater, supplemental contextual information (metadata) must be part of the data. Thus, for each property, metadata identifying the source of the original data, links to similar data in GIN, and a description of the processes, algorithms or methodology used to obtain these datasets will be available to complement the data.

Fecundity of Atlantic herring (Clupea harengus) was estimated within five spawning areas (German Bank, Scots Bay, Seal Island, Southern Shore Nova Scotia, and Eastern Shore Nova Scotia) in Northwest Atlantic Fisheries Organization (NAFO) areas 4WX in 2019 and 2020. The objective of this project was to describe the fecundity-at-size (weight, length, and age) relationships among spawning grounds, compare these relationships to historical fecundity-at-size relationships, and assess the influence of changes in weight-at-age and fecundity over time to the reproductive potential of a unit of spawning stock biomass.Cite this data as: Barrett T. Data of: Fecundity of Herring in Divisions 4WX. Published: September 2021. Population Ecology Division, Fisheries and Oceans Canada, St. Andrews, N.B. https://open.canada.ca/data/en/dataset/e39b1318-c9f7-4686-b5e5-7d838c8ac99a

Salmon have a complex hierarchical population structure extending from groups of salmon at individual spawning sites all the way up to taxonomic species. These independently functioning aggregates are defined as Conservation Units (CUs) in the Wild Salmon Policy. A stock management unit (SMU) is a group of one or more CUs that are managed together with the objective of achieving a joint status.There are 69 SMUs containing 468 CUs. In 2022, eight SMUs units did not have enough information to provide an assessment. Sixty-one units were assigned a forecast. There are ongoing requests to represent salmon information for these areas. Salmon are assessed and managed at different levels for different needs. The layers in this dataset include administrative areas, stock management units, and conservation units.The data included is a shapefile containing a single feature class layer represented in point and polygon form, as well as a csv table (attributes) to present Stock Management Unit information in a simple, visual way.

Monitoring of Unit 2 redfish by Fisheries and Oceans Canada (DFO) ceased in 2002. Since then, the Atlantic Groundfish Council (AGC, formerly the Groundfish Enterprise Allocation Council [GEAC]) has funded surveys approximately every two years in the area, in collaboration with DFO. Over the years, various vessels and gear types have been used. In 2024, a comparative survey was conducted using the CCGS John Cabot and a fishing industry vessel (the Léry Charles) to develop conversion factors that allow data from the 2020, 2022, and 2024 Unit 2 redfish surveys to be standardized to CCGS John Cabot equivalents. The survey covered the waters off southwestern Newfoundland and eastern Cape Breton, corresponding to redfish management Unit 2, which includes NAFO subdivisions 3Pn, 3Ps, 4Vn, 4Vs, and 4W. Here, data collected aboard the CCGS John Cabot are presented. Objectives• Assess the abundance and condition of groundfish and invertebrates• Assess environmental conditions• Inventory the biodiversity of benthic and demersal megafauna• Monitor the pelagic ecosystem• Collect samples for various research projectsData The CCGS John Cabot employed a four-sided modified Campelen 1800 shrimp trawl, fitted with a Rockhopper ("bicycle") footgear. The trawl extension and codend were lined with 12.7 mm knotless nylon mesh. Standard trawl tows were 15 minutes in duration, timed from bottom contact, with a target towing speed of 3 knots.For each fishing tow, the catch is sorted and weighed by taxa; individuals are then counted and biological data are collected on a subsample. For fish, crab and squid, size and weight are measured by individual and, for some species, sex, gonad maturity, and the weight of certain organs (stomach, liver, gonads) are also evaluated. The soft rays of the anal fin are counted for redfish, and the otoliths are sampled for several species such as Atlantic cod, Atlantic halibut, and Greenland halibut. Roughly 2-kg of shrimp are sorted and weighed by species. The other invertebrates are counted (no individual measurements) and photographed.The biological data are divided into 3 files: a “Stations” file containing set information, a “Catches” file containing catches per set for all species caught and a “Carbio” file containing biological and morphometric measurements per individual all species measured except shrimps. The columns source_info, no_survey, nbpc and station_number serve as a common key linking the three datasets. To further link the “Captures” and the “Carbio” files to the species level (for fish and certain invertebrate species), use the columns source_info, no_survey, nbpc, station_number, strap_code, and category. Further shrimp biological and morphometric data are available but are not presented here in order to simplify data presentation. For access to the complete information, please contact the data management team (gddaiss-dmsaisb@dfo-mpo.gc.ca). The latest published data is preliminary and will be updated at the end of January of the following year.It is important to note that this is raw data. Only sets considered successful are retained. In each set, all species are kept, with a few exceptions. Data is available from 1997-2022 but please contact the data management team (gddaiss-dmsaisb@dfo-mpo.gc.ca) for access and further details. For any other information please also contact the data management team.

Standards Units for an opening represents desired soil conservation limits and stocking outcomes for the defined net area to be reforested. An opening may have one or more standard units. Standards Units may not overlap. Older records may not have standard unit maps available. Stocking standards represent legal silviculture obligations for harvested areas for the defined standard units. This is part of the Silviculture and Land status Tracking dataset, which includes tracking achievement of silviculture obligations on Crown Land

A magnitude 5 earthquake scenario along an unnamed fault located about 15 km north-northeast of Burnaby City Hall and directly south of Mt Elsay. This fault is not known to be active, but this scenario represents a small but damaging event in the North Shore Mountains.

The Wildlife Management Unit Biologist Contact Boundaries dataset is comprised of all the polygons that represent the Wildlife Management Unit Biologist Contact Boundaries within the Province of Alberta. The dataset is to help determine which Biologist is responsible for each Wildlife Management Unit. Please refer to the metadata included with the data for full entity attribute information.