This dataset includes daily averages of solar irradiance on tilted surfaces for all of Canada based on the period of 1998 - 2022.Daily averages of solar irradiance are displayed on both a monthly and annual basis for ten different tilt and tracking methods relative to the ground (horizontal) and latitude of the location. The daily averages were derived from multi-year satellite-derived solar resource datasets at an hourly temporal resolution and gridded geospatial resolution of approximately 10 km by 10 km.The data can be used to further assess the potential of solar energy technologies in Canada, including solar photovoltaics (PV) for electricity and solar thermal for domestic hot water and space heating. Maps of solar resource potential in Canada – Data Format The data stored in these files includes the daily-average insolation on tilted surfaces in units of kW·hr/m² for a given period. Each band represents period, numbered in order: band 1 = Annual, band 2 = January, band 3 = February, ..., band 13 = December.The period of averaging is the year 1998-2022, inclusive.Four fixed tilted surfaces of 0° (horizontal), 30°, 60°, and 90° (vertical) relative to the horizontal plane:- fixed tilted surfaces of 0° (vertical) relative to the horizontal plane (H+ 00 S+00)- fixed tilted surfaces of 30° (vertical) relative to the horizontal plane (H+ 30 S+00)- fixed tilted surfaces of 60° (vertical) relative to the horizontal plane (H+ 60 S+00)- fixed tilted surfaces of 90° (vertical) relative to the horizontal plan (H+ 90 S+00)Three fixed tilted surfaces of 0°, +15°, and -15°, relative to the local latitude:- fixed tilted surfaces of 0° relative to the local latitude (L+00 S+00)- fixed tilted surfaces of +15°, relative to the local latitude (L+00 S+00)- fixed tilted surfaces of -15°, relative to the local latitude (L+00 S+00)- A two-axis tracking surface that follows the sun throughout the day (T+00 T+00)- A single-axis tracking surface with the axis aligned north-south, tracking the sun east to west (A+00_S+90)- A single-axis tracking surface with the axis aligned east-west, tracking the sun's elevation (A+00_S+00)

The Maritimes Region is divided into seven Clam Harvesting Areas (CHA).CLAM HARVESTING AREA 1 is described as follows:The inland and tidal waters of the counties of Colchester, Cumberland and Hants that border and flow into the Bay of Fundy.CLAM HARVESTING AREA 2 is described as follows:The inland and tidal waters of the counties of Annapolis, Digby and Kings.CLAM HARVESTING AREA 3 is described as follows:The inland and tidal waters of Yarmouth County.Time restrictions for Clam Harvesting Area 3: No person shall fish for clams from sunset each Saturday until sunrise on the following Monday (closed Sundays) in the boundaries of Clam Harvesting Area 3.CLAM HARVESTING AREA 4 is described as follows:The inland and tidal waters of the counties of Shelburne, Queens and Lunenburg and that portion of Halifax County west of Pennant Point (as defined in the Territorial Sea Geographical Coordinates Order (C.R.C., c. 1550), Schedule I, Area 4).CLAM HARVESTING AREA 5 is described as follows:The inland and tidal waters of Guysborough County and that portion of Halifax County east of Pennant Point (as defined in the Territorial Sea Geographical Coordinates Order (C.R.C., c. 1550), Schedule I, Area 4).CLAM HARVESTING AREA 6 is described as follows:The inland and tidal waters of the counties of Richmond and Cape Breton, all of Victoria County except that portion between Cape North and Inverness County and that portion of Inverness County that borders on the Bras d'Or Lakes.NEW BRUNSWICK - BAY OF FUNDY CLAM HARVESTING AREA 7 is described as follows:The inland and tidal waters of the counties of Charlotte, Saint John and Albert that flow into the Bay of Fundy.

This record contains satellite-sensed chlorophyll-a concentration images of the Canadian Beaufort Sea at 1.1 km resolution. The dataset consists of 276 images, aggregated into two-week composites by calculating the mean value at each pixel, comprising years 1998 through 2020.The dataset spans two ocean colour sensors, MODIS-Aqua and SeaWiFS. The Arctic Ocean Empirical algorithm was used to calculate chlorophyll-a concentration, after images were corrected for atmospheric effects using the NIR-SWIR switching algorithm, and Remote Sensing Reflectance (Rrs) were produced. A linear transform in log-10 space was applied to the chlorophyll-a concentration measured by SeaWiFS to improve its correlation with chlorophyll-a concentration measured by MODIS-Aqua.The months of October through February were excluded from these datasets as the sun angle in winter is too low (e.g., polar night) for reliable data to be acquired, and the region is mostly covered in sea ice. For further details, see Galley et al., 2022.

Facilities that separate and convert crude oil or other feedstock into liquid petroleum products, including upgraders and asphalt refineries.Mapping Resources implemented as part of the North American Cooperation on Energy Information (NACEI) between the Department of Energy of the United States of America, the Department of Natural Resources of Canada, and the Ministry of Energy of the United Mexican States.The participating Agencies and Institutions shall not be held liable for improper or incorrect use of the data described and/or contained herein. These data and related graphics, if available, are not legal documents and are not intended to be used as such. The information contained in these data is dynamic and may change over time and may differ from other official information. The Agencies and Institutions participants give no warranty, expressed or implied, as to the accuracy, reliability, or completeness of these data.

Facilities are an oil and gas activity, defined in the Energy Resources Activities Act as a system of vessels, piping, valves, tanks and other equipment used to gather, process, measure, store or dispose of petroleum, natural gas, water or a substance referred to in paragraph (d) or (e) of the definition of pipeline. This dataset contains point features for proposed applications collected through the BC Energy Regulator's Application Management System (AMS). This dataset is updated nightly.

Land Plats illustrate in map view the oil or gas Spacing Areas delimited in a pool, and names the geological formation in which the pool is recognised. Land Plats are the sole official record of where the Director of PandNG Titles Branch recognizes a pool of hydrocarbons to exist for the purpose of administering oil and gas title

The High Arctic dataset comes from the Petroleum and Environmental Management Tool (PEMT). The online tool was decommissioned in 2019 and the data was transferred to Open Data in order to preserve it.The PEMT was originally developed in 2009 to help guide development in the Canadian Arctic by Indian and Northern Affairs Canada (INAC). The online tool mapped the sensitivities of a variety of Arctic features, ranging from whales to traditional harvesting, across the Arctic. The tool was intended to aid government, oil and gas companies, Aboriginal groups, resource managers and public stakeholders in better understanding the geographic distribution of areas which are sensitive for environmental and socio-economic reasons. The study area is located in the High Arctic Archipelago and contains both marine and terrestrial components. The boundaries of the study area are based on the NOGB leasing grids applied in the High Arctic, under which exploration, significant discovery and production licenses may be issued. The Sverdrup Basin (and Lancaster Sound) has the highest known oil and gas potential of the sedimentary basins of the Arctic Islands (Nunavut Planning Commission 2000) and it is expected that there is oil and gas potential on Melville Island and Bathurst Island (Sivummut Economic Development Strategy Group 2003). To date, no gas has been produced, and 321,470 m³ of oil has been produced from the Bent Horn oil field (Morrell et al. 1995). DISCLAIMER: Please refer to the PEMT Disclaimer document or the Resource Constraints - Use Limitation in the Additional Information section below.Note: This is one of the 3 (three) datasets included in the PEMT application which includes the Beaufort Sea and Mackenzie Delta and Eastern Arctic datasets.

Historical Oil Fields are subsurface accumulations or 'pools' of crude oil designated as such for the purposes of the Oil, Gas and Salt Resources Act. This product requires the use of geographic information system (GIS) software.

The locations of wells that have been drilled for oil production, gas or salt resources or for underground storage of hydrocarbons. This data can be used for land use and resource management, emergency management, as well as compliance and enforcement in the petroleum industry. The Data is collected on an on-going basis and maintained in the Ontario Petroleum Data System (OPDS).

Yukon Oil and Gas Dispositions. Created from the disposition abstracts and the Oil and Gas Land Division System. For more information visit [https://yukon.ca/en/doing-business/licensing/apply-oil-and-gas-rights#disposition-overview](https://yukon.ca:443/en/doing-business/licensing/apply-oil-and-gas-rights)Distributed from [GeoYukon](https://yukon.ca/geoyukon) by the [Government of Yukon](https://yukon.ca/maps) . Discover more digital map data and interactive maps from Yukon's digital map data collection.For more information: [geomatics.help@yukon.ca](mailto:geomatics.help@yukon.ca)