Home /Search
Search datasets
We have found 38 datasets for the keyword " sonde antigel". You can continue exploring the search results in the list below.
Datasets: 106,578
Contributors: 42
Results
38 Datasets, Page 1 of 4
Passamaquoddy Bay monthly Conductivity Temperature and Depth (CTD) sampling (1989 - 2018)
A systematic oceanographic monitoring program was initiated in September 1989 at twenty-five monitoring stations in the Passamaquoddy Bay area and approaches by Dr. Shawn Robinson based out of the St. Andrews Biological Station (SABS). Stations were established in a uniform grid pattern of two arcminutes latitude and longitude over the study area in order to develop a database on the spatial patterns of water properties. Monthly measurements of the water column for the temperatures and salinity at all stations was completed using a Seacat SBE 19 internally recording CTD from Sea-bird Electronics Inc. The CTD was programmed to record conductivity, temperature, and depth at a frequency of 2 hz, corresponding to 2 measurements per meter of water depth. CTD casts were recorded for each of the 25 stations in the study area monthly using the R/V Pandalus, and later the CCGS Viola M. Davidson based out of SABS. The CTD was configured such that the sensors were oriented towards the benthos and the CTD was then attached to a hydraulic winch on the deck of the ship by a stainless steel cable one meter above a weight, and lowered 1 m below the water's surface in order for the CTD to equilibrate for one minute. The CTD was then lowered at 1 m/s to the benthos using a metered block on the winch to determine when the CTD had reached the maximum depth at that station. Once the weight had touched the bottom, the CTD was retrieved from the water, turned off, and placed in a bucket of fresh seawater in order to minimize equilibration time at the next station. Initially, the CTD measured salinity via water forced through the salinity cell with the drop rate of 1 m/s, but in August 1992, a pump was mounted on the CTD in order to provide a more consistent flow of water across the salinity cell. Surface temperatures were measured from bucket samples collected upon arriving at each station using a hand-held mercury thermometer at each station, and Secchi disk measurements were recorded. All data were downloaded from the CTD upon return to SABS using a DFO computer and the proprietary Sea-Soft software. Downcast data from each profile was retained, binned into 1 m intervals, and processed to remove data spikes, density inversions, and anomalies due to inadequate instrument equilibration. Processed data was then stored in the DFO's Oracle database (PTRAN) under the IMTA_SABS schema in the INVHYD and INVINF tables. Station numbers and locations are recorded in the CTD_STATIONS table in the IMTA_SABS schema.Cite this data: Robinson, S. Data of: Passamaquoddy Bay monthly Conductivity Temperature and Depth (CTD) sampling (1989 - 2018). Published: October 2019. Coastal Ecosystems Science Division, Fisheries and Oceans Canada, St. Andrews, NB. https://open.canada.ca/data/en/dataset/12184962-7879-4214-aef0-b31162f04a27
NWT Aster DEM
The ASTER instrument that was launched onboard NASA’s Terra spacecraft in December 1999 has an along-track stereoscopic capability using two telescopes in its near infrared spectral band to acquire data from nadir and backward views. Over 1.2 million scenes (level-1A products) acquired between March 2000 and August 2008 were used to generate the ASTER Global DEM (ASTGTM) collection. For more information on the ASTER Global DEM, please see the metadata link.
NWT Aster DEM Basemap
The ASTER instrument that was launched onboard NASA’s Terra spacecraft in December 1999 has an along-track stereoscopic capability using two telescopes in its near infrared spectral band to acquire data from nadir and backward views. Over 1.2 million scenes (level-1A products) acquired between March 2000 and August 2008 were used to generate the ASTER Global DEM (ASTGTM) collection. For more information, please see the metadata link above.
Inventory of macroalgae and benthic macroinvertebrates on the north shore of the Saint-Lawrence Estuary (2019)
This inventory, conducted from September 26th to October 3th, 2019, aimed to describe the community structure of macroalgae and benthic macroinvertebrates of five small estuaries of the Upper North Shore of Quebec, namely Barthélemy Bay and the Colombier, Mistassini, Franquelin and Saint-Nicolas rivers. This inventory is part of a doctoral study of Valentine Loiseau on the global changes in the St. Lawrence system, mainly the study of marine benthic communities in response to changes of salinity, to ensure proper management of the environment in the face of future changes. The main objective is to describe the structure and the levels of specific diversities of mediolittoral communities of benthic macroinvertebrates and macroalgae along a salinity gradient. These five small estuaries were selected because of their similar size, hard substrates and easy access. Three levels of hypoosmotic stress (low, medium, high) and one control level (seawater) were used for each of the selected estuaries, with eight quadrats per stress level. Quadrat positions were randomly selected but had to meet two criteria: (1) regular height in the foreshore to control the influence of other stresses (temperature, exposure); and (2) presence of at least one macroalga to maintain homogeneity. A percentage cover by macroalgal and macroinvertebrate species was estimated, and then all organisms were weighed by species and size group. The salinity of the nearest water point was measured at mid-tide with a portable refractometer and a Castaway-type CTD (Conductivity-Temperature-Density) probe. The inventory was done using a stratified random sampling design and the sampling unit was a quadrat measuring 25 x 25 cm. The three files provided (DarwinCore format) are complementary and are linked by the "eventID" key. The "event_information" file includes the generic information of the quadrat, including date and location. The "additional_information_event_and_occurrence" file includes salinity and substrate type of the quadrat, as well as the total weight of all individuals of the same species caught in the quadrat extrapolated to one square metre of surface. For nudibranchs and barnacles, weight was estimated from the size of the individuals so that they were not removed from the environment. The "taxon_occurrence" file includes the taxonomic inventory of macroalgal and benthic macroinvertebrate species observed in the quadrat, identified to the lowest possible species or taxonomic level and biomass by identified species.For quality control, organisms were identified on the field using the following guide: Chabot, Robert et Anne Rossignol. 2003. Algues et faune du littoral du Saint-Laurent maritime : Guide d'identification. Institut des Sciences de la mer de Rimouski, Rimouski ; Pêches et Océans Canada (Institut Maurice-Lamontagne), Mont-Joli. 113 pages. The taxonomy was checked against the World Register of Marine Species (WoRMS) to match recognized standards and using the R obistools and worrms libraries. The WoRMS match was placed in the "scientificNameID" field of the occurrence file. All sample locations were spatially validated. This project was funded by DFO Coastal Environmental Baseline Program under Canada’s Oceans Protection Plan. This initiative aims to acquire environmental baseline data contributing to the characterization of important coastal areas and to support evidence-based assessments and management decisions for preserving marine ecosystems.
Beaufort Sea Marine Fishes Project (BSMFP) 2013 - Sampling Stations
From August 2nd to September 9th, 2013, Fisheries and Oceans Canada conducted a baseline survey of marine fishes and their habitats on the Canadian Beaufort Shelf and slope. Sampling was conducted from the F/V Frosti at 64 stations along ten transects. Standardized sampling was conducted on the transects at pre-determined depth stations (20-40, 75, 200, 350, 500, 750, and 1000 m) using a variety of sampling equipment including benthic fishing trawls, plankton nets, sediment cores, and CTD and water sample profiles. A specialized CTD probe (UCTD) was deployed at an additional 72 locations while the ship was underway.Presented here is the information on the sampling locations, and the sampling gear deployed at each station.
Beaufort Sea Marine Fishes Project (BSMFP) 2012 - Sampling Stations
From August 5th to September 3rd, 2012, Fisheries and Oceans Canada conducted a baseline survey of marine fishes and their habitats on the Canadian Beaufort Shelf and slope. Sampling was conducted from the F/V Frosti at 28 stations along four transects. Standardized sampling was conducted at pre-determined depth stations (20-40, 75, 200, 350, 500, 750, and 1000 m) using a variety of sampling equipment including benthic fishing trawls, plankton nets, sediment cores, and CTD and water sample profiles. A specialized CTD probe (UCTD) was deployed at an additional 30 locations while the ship was underway. Presented here is the information on the sampling locations, and the sampling gear deployed at each station.
Vehicle and sonde data from an autonomous underwater vehicle survey of Musquash Marine Protected Area
The Coastal Environmental Baseline Program is a multi-year Fisheries and Oceans Canada initiative designed to work with Indigenous and local communities and other key parties to collect coastal environmental data at six pilot sites across Canada (Port of Vancouver, Port of Prince Rupert, Lower St. Lawrence Estuary, Port of Saint John, Placentia Bay, and Iqaluit). The goal of the Program is to gather local information in these areas in effort to build a better understanding of marine ecological conditions. The Maritimes region has developed a habitat classification program to align with the oceanographic interests and data needs of local communities and stakeholders, with the goal of sharing this information via open data. In 2020, a habitat survey in the lower Musquash Marine Protected Area (MPA) was undertaken to further develop this project, using an Autonomous Underwater Vehicle (AUV) equipped with high-frequency (450 kHz) side scan sonar to build a habitat map of the MPA. This dataset includes mosaicked series of sonar images (raw & position-corrected versions), covering roughly 6 km2 of marine and intertidal areas in the Musquash MPA. Doppler Velocity logs and mission-specific files for each survey are also included, along with detailed methodological documentation. These data were generated from 17 separate survey missions that were completed in August, September and October 2020.
St. Lawrence Integrated Management Areas (ZGISL)
Location and identification of the 6 integrated water management zones of the St. Lawrence in southern Quebec.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**
BC Schools - K-12 with Francophone Indicators
This dataset is comprised of locations and current information for all schools for Kindergarten to Grade 12 in British Columbia. Indicators are included for schools that offer French programs including: Core French, Early French Immersion, Late French Immersion and Francophone Program.
Adelges abietis
Historical finds of Adelges abietis
Tell us what you think!
GEO.ca is committed to open dialogue and community building around location-based issues and topics that matter to you.
Please send us your feedback