Stream Centreline Network derived from 1:50,000 scale mapping. Each stream channel is represented by one or more line segments. Based on the 1:50,000 scale Canadian National Topographic Series of Maps.

Stream routes. Each stream channel is represented by a single line. Derived from the Stream Centreline Network Spatial layer and based on the 1:50,000 scale Canadian National Topographic Series of Maps.

A vector representation of stream networks is a crucial dataset for the modelling the surface water and groundwater components of the hydrologic cycle. For many usages a crucial attribute of the drainage network is a digital topology and hierarchal stream order attribute (e.g., Strahler stream order). In Canada jurisdictional stream networks are available for the provinces and territories and nationally for Canada in the National Hydrological Network (NHN) dataset. Unfortunately, the NHN data lacks the same topological and attribute information that is available for numerous provinces due to standardization for the entire country. For Canada1Water it was also necessary to have a harmonized dataset with the United States, for both the southern transboundary watersheds and the Alaskan watersheds. This report documents the processes completed to upgrade the topological and graph network support for NHN and provide continuous connectivity with US datasets. It also highlights and corrects a number of stream density and stream order issues that occur within Canada across provincial and territorial borders and NTS tiles. All vector processing was completed in RivEX software extension for ArcMap. Following complete topological correction stream classification was assigned and a table of the node graph network developed. Additional work was then completed to normalize stream density particularly amongst low-order streams between British Columbia and the Yukon and amongst local NTS tiles in Quebec and Ontario. Corrected NHN Strahler stream order assignment was validated against a number of provincial and watershed datasets, all of which already have Strahler stream order attributed. These datasets are the same underlying digitized vector data, so there are no differences in node or polyline positions. Strahler stream order assignment validation was only done by visual comparison as due to differences in vector segments a statistical comparison is complicated. The transboundary integrated C1W stream network with complete classification provides a seamless national dataset to support transdisciplinary studies (fisheries, wildlife, health, pesticide and nutrient issues, mining impact, ecosystem restoration, numeric modelling) that involve a knowledge of stream distribution and ranking.

Flow network arcs (observed, inferred and constructed). Contains no banks, coast or watershed bourdary arcs. Directionalized and connected. Contains heirarchial key and route identifier

The “Hydrometric Gauging Station Network of the AAFC Watersheds Project - 2013” dataset is a geospatial data layer containing network line features representing links between hydrometric gauging stations of the Agriculture and Agri-Food Canada (AAFC) Watersheds Project. Each line connects a gauging station to its downstream neighbour(s), indicating its drainage direction.This network is a ‘drainage’ network, not a ‘stream’ network. That is, the lines do not in any way portray the actual stream path between stations.In some instances, a lake, for example, an area may have several gauging stations. In such cases, one of the gauging stations is designated the ‘primary’ gauging station for calculation purposes, and to maintain proper hydraulic relationships between gauging stations, where only the primary stations are connected to the downstream portion of the network.

Fisheries Information Summary System (FISS) layer of Historic (pre 2001) Fish Distribution Points of BC Streams. Points represent site locations where a fish species is rearing, spawning or observed or where a point is located at the mouth of a stream it indicates the presence of a fish species somewhere in the stream as a whole. Georeferenced to the stream centreline network layer of the 1:50,000 scale BC Watershed Atlas.

This dataset shows length weighted connectivity values summarized by hydrologic unit code (HUC) for a provincial stream connectivity indicator that assesses connectivity for aquatic organisms in stream networks. The stream connectivity indicator supports evaluation and reporting on indicator condition over time and provides information to support management of watercourse crossings. The stream connectivity indicator produces an estimate of the average connectivity in a stream network, considering the movement requirements of local species and the locations of watercourse crossings. The indicator is calculated and summarized using hydrologic unit codes (HUCs). Indicator values are calculated at a HUC 6 scale, and summarized for HUC 8 watersheds at eight timesteps: 2010, 2014, 2016, 2018, 2019, 2020, 2021, and 2022.

Points with rotations that indicate downstream flow direction. Can be displayed with arrow symbols to show flow direction. There is one point at the upstream end for each stream network feature

Links the edge type codes used in the stream network layer with an English description used to categorize stream network features

The Canadian Hydrospatial Network (CHN) is an analysis-ready geospatial network of features that help enable the modelling of surface water flow in Canada. The six main layers and feature types are: flowlines, waterbodies, catchments, catchment aggregates, work units, and hydro nodes. Where possible the CHN is derived from high resolution source data such as Light Detection and Ranging (LiDAR) derived Digital Elevation Models (DEMs) and aerial imagery, to name a few. If existing provincial or territorial hydrographic networks meet the standards, they are incorporated into the CHN, otherwise automatic extraction methods are used on the high-resolution source data. To provide full network connectivity, if neither of these methods is possible in a region, the NHN is converted into the CHN until higher-resolution source data is available.Additional value-added attributes are included in the CHN to aid modelling, such as stream order and reach slope. The CHN physical model and features are also closely aligned and harmonized with the USGS 3DHP hydrographic network, which aids trans-border modelling. Where possible geonames (i.e. toponyms) are also added.The CHN is produced and disseminated by hydrologically connected geographic areas called work units. Work units can contain just one watershed, several small adjacent watersheds outletting into a large body of water, or be one of many parts of a larger watershed. In all cases, the features of a work unit are hydrologically connected. This is a more natural approach to data delivery, in comparison to data that is split into tiles. A generalized work unit index file is provided in the downloads to help users decide which files to download.For more information on the CHN please visit the project webpage: https://natural-resources.canada.ca/canadian-hydrospatial-network