Canada's National Forest Inventory (NFI) sampling program is designed to support reporting on forests at the national scale. On the other hand, continuous maps of forest attributes are required to support strategic analyses of regional policy and management issues. We have therefore produced maps covering 4.03 × 106 km2 of inventoried forest area for the 2001 base year using standardised observations from the NFI photo plots (PP) as reference data. We used the k nearest neighbours (kNN) method with 26 geospatial data layers including MODIS spectral data and climatic and topographic variables to produce maps of 127 forest attributes at a 250 × 250 m resolution. The stand-level attributes include land cover, structure, and tree species relative abundance. In this article, we report only on total live aboveground tree biomass, with all other attributes covered in the supplementary data (http://nrcresearchpress.com/doi/suppl/10.1139/cjfr-2013-0401). In general, deviations in predicted pixel-level values from those in a PP validation set are greater in mountainous regions and in areas with either low biomass or sparse PP sampling. Predicted pixel-level values are overestimated at small observed values and underestimated at large ones. Accuracy measures are improved through the spatial aggregation of pixels to 1 km2 and beyond. Overall, these new products provide unique baseline information for strategic-level analyses of forests (https://nfi.nfis.org)Collection:- **[Canada's National Forest Inventory (NFI) 2006](https://open.canada.ca/data/en/dataset/e2fadaeb-3106-4111-9d1c-f9791d83fbf4)**

These structure, isopach and zero edge files are part of a series of stratigraphic framework maps for the Saskatchewan Phanerozoic Fluids and Petroleum Systems (SPFPS) project.The series of stratigraphic framework maps for the Saskatchewan Phanerozoic Fluids and Petroleum Systems (SPFPS) project have been produced using 2 km equi-spaced modified grids generated from Golden Software’s Surfer 9 kriging algorithm. The dataset used to produce each of the maps in this series was created using data from several projects completed by the Ministry (Christopher, 2003; Saskatchewan Industry and Resources et al., 2004; Kreis et al., 2004; Marsh and Heinemann, 2006; Saskatchewan Ministry of Energy and Resources et al., 2007; Heinemann and Marsh, 2009); these data were validated and edited as required to facilitate correlations between the various regional projects. In addition, to minimize edge effects during contouring, the senior author also generated stratigraphic data from wells in adjacent jurisdictions.

The lobster recruitment project is run by the Fishermen and Scientist Research Society (FSRS) through DFO funding. Fishermen participating in the lobster recruitment project collect information about lobster in their fishing area by fishing 2-5 scientific project traps (SPTs) (fished in fixed locations) within the regular commercial season. The SPTs used in all fishing areas are smaller than commercial traps and designed to primarily catch juvenile lobsters below the legal-size limit.These traps are additional to the vessel's legal number of commercial traps. The lobster recruitment project has more than 120 fishers participating from all LFAs along the Atlantic coast of Nova Scotia from LFA 27 in Cape Breton to LFA 35 in the Bay of Fundy (excluding LFA 28, who have not participated to-date).The number of fishermen per LFA and number of SPTs per fisherman are decided on by the LFA Advisory Committees. This decision considers how much additional effort they were comfortable having in the LFA (i.e. number of SPTs) and from how many traps each fisher could be reasonably expected to collect data. It is also important to have fishers dispersed enough to maximize study footprint. DFO Science consults on project design. SAMPLING METHODS: The fishers record the number, sex and length of lobsters captured in each SPT, as well as presence of eggs, tags or v-notch. Bottom temperatures are monitored by placing a temperature recorder in one of their SPTs for the entire lobster season.Cite this data as: Tibbets-Scott, S., Zisserson, B. Data of: Fishermen and Scientist Research Society (FSRS) Lobster Recruitment Trap Project. Published: November 2020. Population Ecology Division, Fisheries and Oceans Canada, Dartmouth, N.S. https://open.canada.ca/data/en/dataset/a88f9b4d-b59a-44f6-ae7e-d36550266940

The Common Attribute Schema for Forest Resource Inventories (CASFRI) is a Canadian forest resource inventory data repository. Forest resource inventory datasets in CASFRI are harmonized to a common data model so that data collected by different agencies following different standards can be used together. Participating provincial, territorial and federal government departments and agencies share current and historical map-based forest resource inventory datasets through CASFRI so that their data are available to users who’s areas of interest span multiple jurisdictions. CASFRI was originally developed by academic researchers (Cumming et al., https://doi.org/10.1139/cjfr-2014-0102). This flavour of CASFRI (CASFRIv5) was developed anew in collaboration with academic researchers at the University of Laval to provide a government version of CASFRI that is findable, accessible, interoperable, and reusable. It uses the most up-to-date forest inventory data provided by participating provincial, territorial, and federal government departments and agencies. CASFRIv5 is hosted on the Canadian Council of Forest Ministers’ data portal, the National Forest Information System (http://nfis.org).

The Forest Change Type data described here is an update to previously posted open data. The date range for this data is 2012 to 2015. The Forest Change Type data for the prior period from 1985 to 2011 can be found here: https://opendata.nfis.org/mapserver/nfis-change_eng.html or https://gcgeo.gc.ca/geonetwork/search/eng search for “Forest Change” but you must be logged in to see the data. It is developed within the framework of Canada’s National Terrestrial Ecosystem Monitoring System (NTEMS).The forest change data included in this product is national in scope (entire forested ecosystem) and represents the first wall-to-wall characterization of wildfire and harvest in Canada at a spatial resolution commensurate with human impacts. The information outcomes represent 25 years of stand replacing change in Canada’s forests, derived from a single, consistent spatially-explicit data source, derived in a fully automated manner. This demonstrated capacity to characterize forests at a resolution that captures human impacts is key to establishing a baseline for detailed monitoring of forested ecosystems from management and science perspectives. Time series of Landsat data were used to characterize national trends in stand replacing forest disturbances caused by wildfire and harvest for the period 1985–2010 for Canada's 650 million hectare forested ecosystems (https://authors.elsevier.com/sd/article/S0034425717301360). Landsat data has a 30m spatial resolution, so the change information is highly detailed and is commensurate with that of human impacts. These data represent annual stand replacing forest changes. The stand replacing disturbances types labeled are wildfire and harvest, with lower confidence wildfire and harvest, also shared. The distinction and sharing of lower class membership likelihoods is to indicate to users that some change events were more difficult to allocate to a change type, but are generally found to be in the correct category. For an overview on the data, image processing, and time series change detection methods applied, as well as information on independent accuracy assessment of the data, see Hermosilla et al. (2016; http://www.tandfonline.com/doi/full/10.1080/17538947.2016.1187673).The data available is, 1. a binary change/no-change; 2. Change year; and, 3. Change type. When using this data, please cite as: Hermosilla, T.,Wulder, M. A.,White, J. C.,Coops, N. C.,Hobart, G. W., (2017). Updating Landsat time series of surface-reflectance composites and forest change products with new observations. International Journal of Applied Earth Observation and Geoinformation. 63: 104-111. DOI: 10.1016/j.jag.2017.07.013 White, J.C., M.A. Wulder, T. Hermosilla, N.C. Coops, and G. Hobart. (2017). A nationwide annual characterization of 25 years of forest disturbance and recovery for Canada using Landsat time series. Remote Sensing of Environment. 192: 303-321. DOI: 10.1016/j.rse.2017.03.035.

These data sets provide information pertaining to shrimp and bycatch estimates associated with otter-trawling and trapping (November, 2000) and beam-trawling (February, 2001) in Simoom Sound. Data sets were compiled and formatted by Meagan Mak.Abstract from report:As part of a project investigating possible modification of marine ecosystems by shrimp trawling and trapping, we obtained information on catches offish, shrimp, prawns , and bycatch organisms as well as weight, sex ratios , egg location and colIateral damage to several species of pandalids and eualids. Focusing on the humpback shrimp (Pandalus hypsinotus), we assessed damage to the rostrum, carapace, abdomen, and tail fan on specimens caught by beam trawling, otter trawling, and trapping. Data are given from a preliminary study conducted in Northumberland Channel in June 2000 and more comprehensive sampling from Simoom Sound in November 2000 and February 2001.

On July 6, a train of 72 cars, carrying 100 tons of crude oil each, exploded in Lac-Mégantic. A high-resolution aerial photograph was collected by Aéro-Photo after the train derailment. This aerial photograph was provided and georeferenced by Aéro-Photo (1961) inc. Purpose: This aerial photograph makes it possible to identify the impact radius of the accident. The image web service (WMS) is offered as an open service. However, to obtain the raw image, please contact Aéro-Photo (1961) inc.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

The Steller sea lion (Eumetopias jubatus) is the largest species of sea lion with males weighing as much as 1,100 kg and females as much as 350 kg. In Canada, the Steller can be spotted along the rocky coast of British Columbia (BC). These highly mobile marine mammals typically travel alone or in small groups, but they congregate in large numbers at traditional rookeries and haul-outs during the mating and pupping season. Females generally live longer (up to 30 years) than males (usually up to 20 years). The population was severely depleted in Canada but following its protection in 1970, the size of the adult population has more than doubled.Trends in the abundance of Steller sea lions in BC have been assessed based on a series of standardized, province-wide aerial surveys conducted during the breeding season (27-June to 06-July) between 1971 and 2021. Additional ad-hoc surveys during the fall, winter, and spring periods were completed to assess sea lion distribution outside of the breeding season. Surveys targeted historically occupied rookeries and haul-out sites with nearby areas also monitored for potential shifts in distribution.Both datasets contain counts that have been collected from sightings of individuals from 1971 through 2021. The updated standard breeding season survey counts data file consolidates and extends two previous datasets – one covering 1971 through 2013 and the other covering the summer portion of the 2016/2017 surveys. The non-breeding season count data was previously limited to the fall-winter portion of the 2016/2017 surveys and the updated data covers the entire study period to date.

The Essential Skills Playbook projects map is developed to highlight projects featured as part of the “Essential Skills Playbook” published by the Office of Literacy and Essential Skills program (OLES) at Employment and Social Development Canada (ESDC). The playbook is developed as a showcase for sharing promising practices, case studies and partnerships, based on OLES projects that were funded through grants and contributions generally dating back to 2012. This map allows users to visualize OLES-funded projects and explore various data variables such as the targeted groups, essential skills, and industry sectors of each project.

The spatial representation for a Forest Addition, which is any Forest land that is to be designated by the Lieutenant Governor, into an established forest, to be managed and used for the social and economic benefit of the Province